hi all
i have 2 Uhf Micor Receivers that i just dismantle from a Micor
Repeater,
there were in the 414.6250 mhz
i think the parts number is TLE8821ABR or ADR ,,,it is badly stamped on
the board,the channel element are there
i would trade them for 1 Vhf receiver TLD8272B
you can find me here a
Hello all, I am still looking for a source of Motorola Micor Range 1 receiver cards. 406-420 MHz. Id like to use these for repeater linking. Or does anyone have a source for any power, low split UHF 406-420 range Micor Repeater stations? I had a few contacts however still lo
PM To: Repeater-Builder@yahoogroups.com Cc: [EMAIL PROTECTED] Subject: [Repeater-Builder] UHF Micor Receivers WANTED
Hello all, I am still looking for a source of Motorola Micor Range 1 receiver cards. 406-420 MHz. I’d like to use these for repeater linking.
Or does anyone have a source for any
[EMAIL PROTECTED]
Sent: Friday, February 17, 2006
9:10 AM
To:
Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder]
UHF Micor Receivers WANTED
Have you tried ebay? Just in the last few weeks, there was a set of
three - 406-420 MHZ range UHF MICOR mobiles that went for $10 for the set
ter-Builder@yahoogroups.com
> [mailto:[EMAIL PROTECTED] On Behalf Of N9WYS
> Sent: Friday, February 17, 2006 2:45 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: RE: [Repeater-Builder] UHF Micor Receivers WANTED
>
> Only thing about using mobile receiver sections in a
> SpectraTAC
, February 17, 2006 1:52 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] UHF Micor Receivers WANTED
Huh? Micor receivers are Micor receivers, whether they're sitting in a
mobile, station, or SpectraTAC chassis. Or in some cases, even in a
PURC/MSF5000 receiver chassis
-Original Message- From: N9WYS <[EMAIL PROTECTED]>Sent: Feb 17, 2006 11:44 AM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] UHF Micor Receivers WANTED
Only thing about using mobile receiver sections in a SpectraTAC is that the mobile receivers do not ha
time. Now
I’m confused.
???
Mark
From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, February 17, 2006
2:47 PM
To:
Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder]
UHF Micor Receivers WANTED
I
At 02:15 PM 2/17/06, you wrote:
Maybe
Im calling it something that it isnt then&
Im thinking of the solid
aluminum block with screws and an antenna connection. I was
thinking that is the preselector.
I believe someone (more
educated than I regarding the Micor) also told me information that
N9WYS wrote:
>Well, the last VHF Micor I looked at had the preselector in a different
>location... Or maybe it was an "SP" run.
>
>If so, I stand corrected.
>
I have never seen a VHF or UHF Micor receiver without the helical
preselector attached directly to the board. In the case of the VHF,
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Custer
Sent: Friday, February 17, 2006 7:00 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] UHF Micor Receivers WANTED
N9WYS wrote:
>Well, the last V
N9WYS wrote:
OK - sorry!
No one is ripping on you, so no need to run in the corner with your
tail between you legs.
I guess I should have both: 1- looked closer at what I was seeing and 2) not
responded with information I personally hadn't corroborated.
I don't think it *is* eith
[mailto:Repeater-Builder@yahoogroups.com]
On Behalf Of Kevin Custer
Sent: Saturday, February 18, 2006
7:44 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder]
UHF Micor Receivers WANTED
N9WYS wrote:
OK - sorry!
No one is ripping on you, so no need to run in the corner with your
Sounds like he is talking about the little box, and here goes the memory, but the small bandpass filter? Mathew Kevin Custer <[EMAIL PROTECTED]> wrote: N9WYS wrote:>Well, the last VHF Micor I looked at had the preselector in a different>location... Or maybe it was an "SP" run. >>If so, I
Or maybe he was thinking of the Micor Rx Pre-amps?
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to: [EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
15 matches
Mail list logo
