Mark,
I could not find the previous messages on your thread, so please restate the
module numbers of the Master Decoder and Unified Chassis Backplane that you
now have. Do all of the backplanes have the same number stamped in black
ink on them? The number I am referring to is the number stamped
I thought the community repeaters could decode and encode separately. In other
words, there's no requirement that the received PL tone match the transmitted
PL tone. If that's the case, then the PL decoder is supposed to remove any
received PL tone, which sounds exactly like what yours is doing.
the chassis, so hopefully
someone out there has the manual for it.
I *REALLY* need this schematic to get my repeater going...
Thanks,
Mark - N9WYS / WQIV271
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Eric Lemmon
Sent: Saturday, September 20, 2008 11:48 PM
To:
get my repeater going...
Thanks,
Mark - N9WYS / WQIV271
-Original Message-
From: Repeater-Builder@yahoogroups.com
<mailto:Repeater-Builder%40yahoogroups.com> On Behalf Of Eric Lemmon
Sent: Saturday, September 20, 2008 11:48 PM
To: Repeater-Builder@yahoogroups.com
<mailto:Repeater-B
11:04 AM
Subject: RE: [Repeater-Builder] Update on the MICOR Community Repeater
project
> Eric,
>
> The original thread started 08/11... and (forgive me for the bandwidth
> usage) I captured most of it here. I did take the liberty to edit out some
> of the stuff I felt was "unimpo
n9wys wrote:
> Eric,
> For everyone: At one point, Eric referred me to an eBay auction, listing
> among other things a Master Decoder card of the same part number as the ones
> I have. Those cards were in an MSY chassis... which makes me wonder if
> there is a fundamental difference on the MSY-v
FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of n9wys
Sent: Sunday, September 21, 2008 9:04 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Update on the MICOR Community Repeater
project
Eric,
--- (snip) ---
At
Thanks Gerald!!
I think that'll get me headed in the right direction... Yes, if you can get
a clean copy of the schematic (maybe have someone scan it and send it to me
via e-mail??) that'll help **immensely**!
73 de Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.co
Well, Gerald sent me the schematic for the Master Decoder modules I have. I
compared connections on the card I have (thanks to his schematic) against
what the newer card provides. Here are the comparisons:
Pin 1 - Ground = OK
Pin 2 - PL Tone to Modulator = OK
Pin 3 - To Audio Amplifier
: [Repeater-Builder] Update on the MICOR Community Repeater
project
n9wys wrote:
> Eric,
> For everyone: At one point, Eric referred me to an eBay auction, listing
> among other things a Master Decoder card of the same part number as the
ones
> I have. Those cards were in an MSY chassis...
Mark,
If I remember correctly. And it has been a while.
The Motorola community repeater both the MSY (Motrac-Motran vintage) and
the Micor
The PL came in the receiver and the master decoder would match it to an
active PL or DPL reed or codeplug. Then the station would repeat and the
same Pl f
The latest and FINAL update on this project...
Today, a new-version Master Decoder card (TRN 6165A) arrived via mail.
(**MANY thanks, Gerald!!**)
You know, it's AMAZING how well the radio works when it has all the right
parts in it! I have 700 Hz of PL deviation and 4.7kHz max voice deviation.
12 matches
Mail list logo