Hi!
Ran into some problems...
Fresh Debian10 on a pc where I used Debian8 with RD 2.19.3 The RD itself works
without issues, but:
CAED receives SegFault at the start, whenever there is a USB sound card
selected in rdalsaconfig(updated it compiling from git).
I enabled the integrated sound card, s
On Wed, 21 Aug 2019, Fred Gleason wrote:
Correct, unfortunately. ASI effectively sunset CentOS 6 support over a
year ago. FWIW, the current ASI driver (v4.20.10) does work fine on
CentOS 7 and supports those cards. RPMs are available at:
http://static.paravelsystems.com/audioscience/centos/
Anyone ?
August 29, 2019 1:29 PM, li...@lokum.ro wrote:
> Hi!
> Ran into some problems...
> Fresh Debian10 on a pc where I used Debian8 with RD 2.19.3 The RD itself
> works without issues, but:
> CAED receives SegFault at the start, whenever there is a USB sound card
> selected in
> rdalsaconfi
I will try and get a USB sound card plugged into with the latest 3.0.3 master
branch and see if I can reproduce the problem.
Patrick
> On Aug 29, 2019, at 5:07 AM, li...@lokum.ro wrote:
>
> Anyone ?
>
> August 29, 2019 1:29 PM, li...@lokum.ro wrote:
>
>> Hi!
>> Ran into some problems...
>> Fr
Thanks Patrick,
This is what I am using: Burr-Brown from TI USB Audio CODEC (Wheatstone M4IP
USB)
Previously worked fine...
Liviu
August 29, 2019 4:53 PM, "Patrick Linstruth" wrote:
> I will try and get a USB sound card plugged into with the latest 3.0.3 master
> branch and see if I
> can
Try to use that card tough jackd instead directly in Rivendell and after rotate
the output as u need.
If u need help ask without any problem
Sent from my iPhone
> On 29 Aug 2019, at 16:06, li...@lokum.ro wrote:
>
> Thanks Patrick,
>
> This is what I am using: Burr-Brown from TI USB Audio C
Try to check if alsa recognize the card
aplay -l
Regards
Sent from my iPhone
> On 29 Aug 2019, at 13:43, Rob Landry <41001...@interpring.com> wrote:
>
>
>> On Wed, 21 Aug 2019, Fred Gleason wrote:
>>
>> Correct, unfortunately. ASI effectively sunset CentOS 6 support over a
>> year ago. FWI
Greetings,
I was wondering if anyone has made any progress on this old thread. It
ended with no resolution so wanted to see if anyone was still banging on
this.
As for our stations we are staying on version 2 for now because this issue
is a major problem in the production environment.
btw way I h
This is not an ALSA driver; it's Audioscience's hpklinux driver.
Rob
--
Сквозь грозы сияло нам солнце свободы
И Linus великий нам путь озарил;
Нас вырастил Stallman на верность народу,
На труд и на подвиги нас вдохновил.
On Thu, 29 Aug 2019, Workino wrote:
Try to check if alsa recognize the
Greetings,
As most know HD radio and artist experience rely on NEXT EVENT to preload
images before
the cart fires. Checking out some issues I have been having in this regard
with some song info not being sent until the cart actually fires, i have
noticed that in Rivendell the "next" is not being s
On Thu, 2019-08-29 at 14:06 +, li...@lokum.ro wrote:
> This is what I am using: Burr-Brown from TI USB Audio CODEC
> (Wheatstone M4IP USB)
That's a very common sound device in radio broadcast gear. I've seen it
in Arrakis products as well.
What system sample rate are you using in Rivendell? A
On Thu, 2019-08-29 at 05:17 +0300, li...@lokum.ro wrote:
> So after a lot of checking... Its only related to usb sound cards
> plugged in. If i enable the onboard sound card it works fine...
In '/etc/rd.conf', find the [Alsa] section and try some different
values for 'PeriodQuantity=' (2 or 3) and
tried 48000 (this remained from before)
and 44100 same happened :(
In about 40 minute i will arive and start my night trying to figure this out
alsa i will spill here the asound.config
Thanks
Liviu
August 29, 2019 9:20 PM, "Fred Gleason" wrote:
> On Thu, 2019-08-29 at 14:06 +, li...@lo
On Thu, 2019-08-29 at 07:43 -0400, Rob Landry wrote:
> I can't find any information on how to troubleshoot this. There's
> nothing
> helpful in dmesg. Does anyone know of a diagnostic tool I can use?
Does it show up in lspci(8)? AudioScience cards will normally show up
as a Texas Instruments 'Mul
Thanks,
i leaved them just like before on 2.19.3 on Debian8 and it worked fine before.
i will test it out to see
Liviu
August 29, 2019 9:26 PM, "Fred Gleason" wrote:
> On Thu, 2019-08-29 at 05:17 +0300, li...@lokum.ro wrote:
>
>> So after a lot of checking... Its only related to usb sound c
On Thu, 29 Aug 2019, Fred Gleason wrote:
Does it show up in lspci(8)? AudioScience cards will normally show up
as a Texas Instruments 'Multimedia audio controller' of some sort.
No, it doesn't.
Thanks.
--
Сквозь грозы сияло нам солнце свободы
И Linus великий нам путь озарил;
Нас вырастил Sta
ok,
so here is the asound.conf:
# *** Start of Rivendell configuration generated by rdalsaconfig(1) ***
pcm.rd0 {
type hw
card CODEC_1
device 0
rate 48000
}
ctl.rd0 {
type hw
card CODEC_1
}
pcm.rd1 {
type hw
card CODEC
device 0
rate 48000
}
ctl.rd1 {
type hw
card CODEC
}
pc
On Thu, 2019-08-29 at 20:02 +, li...@lokum.ro wrote:
> ok,
> so here is the asound.conf:
Thanks.
That all looks fine.
Cheers!
|-|
| Frederick F. Gleason, Jr. | Chief Developer |
|
Ok,
So... ended up installing debian10 second time with same error so reverted to
debian9 for now and it works fine(its better than debian8 i had before)
So something must be be fishy with debian10 as any usb sound card fails (tried
2 types) but with internal cards works.
I will stay on debian9
Le 30/08/2019 à 04:03, li...@lokum.ro a écrit :
> So something must be be fishy with debian10 as any usb sound card fails
> (tried 2 types) but with internal cards works.
Doesn't fail for me on Debian 10 with a usb soundcard, a Focusrite Scarlett.
--
Léon.
__
20 matches
Mail list logo