In a message dated 7/28/2005 9:23:08 AM Pacific Standard Time,
[EMAIL PROTECTED] writes:
Well, I can supply the parts to do it yourself. Or I can do it for ya,
to do that I'd need your parts to modify, $50.
The 520/555 motor mount/shiftlinkage brackets are another $50 and
require metal rod
Remove the assembly. Remove the U-joint. Drill hole in the end of the
intermediate shaft. Spray penetrating oil (not WD-40) in the hole. Let
it soak a day or two. If it does not come out, mount the intermediate
shaft in a vice and using a long piece of steel rod (a long 3/8"
extension would wo
Nope, all the flywheels and starters have the same teeth.
Stefan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 28, 2005 8:16 PM
To: [EMAIL PROTECTED]
Subject: SD> Starter Question
well gang I got some quality time with my 86 turbo Z this even
You can also drill and tap it with a small hole, install a grease fitting
and "press" it out that way.
Thanks,
Marc Medina - www.marcmedina.com < now with Shelby Dodge stuff!
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, Ju
Yeah, but make sure that you get all the air out of it before you do
that or the air will compress and can cause the axle to blow out of the
intermediate shaft with some force. Plus you'll need a lot grease to
fill the shaft up. I would think a hydraulic pump/fluid would be a
little easier to cle
Looking to purchase a S-60 harness for an L-body. NOS or mint used. Let me know
if you can help me.
Todd Nelson
-
Start your day with Yahoo! - make it your home page
---REMOVE-FOOTER-WHEN-REPLYING
Does that 87 radio have the 5 band EQ?
My 86 had a bremium sound system with cassete, 5 band EQ, and joystick. I
tossed it years ago, as it was dead, and someone had forcefully removed a
cassete
with a knife or screwdriver and TRASHED the cassete unit.
Im looking for a replacement for the rest
Hey Guys.
The connectors on my 1987 CSX Power Module are wasted. Does anyone
have one or both connectors that they are willing to part with? I would
appreciate it. My car will cut out and die. Then while cranking the engine I
wiggle the forward connector and the car will start.
Phil,
Where are you located? You might be able to clean off the corrosion with some
De-Ox-It and a bunch of "Q-Tips" I have a '86 Daytona Turbo Z that I'm parting
if you're close I'll drop it off.
Best,
Homebrew Bill Countie
'86 Daytona Turbo Z C/S, '91 Spirit R/T 8V, '02 Ram Wagon
Lowell MA
Q
In a message dated 7/29/2005 7:26:58 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
Phil,
Where are you located? You might be able to clean off the corrosion with
some
De-Ox-It and a bunch of "Q-Tips" I have a '86 Daytona Turbo Z that I'm
parting
if you're close I'll drop it off.
Bes
You might be able to clean off the corrosion with some
De-Ox-It and a bunch of "Q-Tips"
Homebrew Bill Countie
'86 Daytona Turbo Z C/S, '91 Spirit R/T 8V, '02 Ram Wagon
Or you can hit it with this stuff...
_http://www.4x4wire.com/toyota/maintenance/tacoma_4runner_30k/CRC_cleaner.jpg
Chris
11 matches
Mail list logo
