Don,
I have TriTecs in my backup set of irons and have sold several sets. SK Fiber
are very consistent shafts quality wise. I found them to be a bit on the
soft side but customers seem to like that.
Jeff
Whole-in-One
Don Flatgard wrote:
Anybody have any experience with
Forgive me, Corey, I don't get access to people actually in the broadcast
business very often. I though the FCC was supposed to have adopted
a single standard for HDTV in this country? Is that eminent? Isn't
cost always the issue? If it isn't technical implementation cost
it's licensing costs.
What's the general feeling about
graphiteversus steel shafts for irons? I know some people want steel,
others graphite but what do you guys prefer?
I never thought much of graphite shaft for irons
but I am getting older and my thinking is starting to change. Plus graphite
shafts for irons
Hi Bernie,
Can't find that Pro Perimeter
head. Is that from Hireko? Not on their web page. Iloaned my catalog to a
friend, can find him either...df
- Original Message -
From:
Bernie
Baymiller
To: [EMAIL PROTECTED]
Sent: Sunday, September 14, 2003 8:23
PM
I seem to remember that someone was producing
movable shaft weights for golf clubs ...
Can anyone point me in the right direction?
thanks in advance
miko
In a message dated 9/15/03 1:02:55 PM Eastern Daylight Time, [EMAIL PROTECTED] writes:
I seem to remember that someone was producing
movable shaft weights for golf clubs ...
I think this is what you were thinking about.
Check out Swingmastergolf.com
In a message dated 9/15/03 1:23:21 AM Eastern Daylight Time, [EMAIL PROTECTED] writes:
Golfers show up at golf courses to play golf, not buy clubs. They will
however, pick up an occasional club they may need if the price is right. I
found that the clubs that sell out of the pro shop are the
I think graphite and steel are both excellent for irons and woods.
I use both in both.
Al
At 10:14 AM 9/15/2003, you wrote:
What's the
general feeling about graphite versus steel shafts for irons? I know some
people want steel, others graphite but what do you guys prefer?
I never thought much
Don,
No, the Pro Perimeter is from Golf Direct (LowPro), a supplier less than a
day from me...and I've seen it a couple of other places, but can't remember
where. It's under the brand name Tech Power. If you're interested in that head,
e-mail me and I'll send you some information.
Bernie,
I need to build a low cost set of irons for travel. I was going to order
the apache mfs 30+, this powerflex sounds too good to be true. I normally
play the R-1 in Apache's old spec's. how do you think this shaft will play
without soft stepping it.
George Huson
Bernie Baymiller wrote:
unsubscribe
George,
If you're considering filament wound shafts, you might want to try the
Mercury lines. Very reasonably priced and consistent shafts.
Burgess
At 04:26 PM 9/15/2003, George wrote:
Bernie,
I need to build a low cost set of irons for travel. I was going to order
the apache mfs 30+, this
Don't
forget that Golfsmith has their Carbon Stick iron shafts on sale for $5.88 each.
They have been recommended on this list in the past and seem OK to
me.
L.
Hunter Kevil
-Original Message-From: George Huson
[mailto:[EMAIL PROTECTED]Sent: Monday, September 15, 2003 4:27
This isn't how you do it.
Go to John's website, Clubmaker-online.com and
follow the instructions.
TFlan
- Original Message -
From:
lde
To: [EMAIL PROTECTED]
Sent: Monday, September 15, 2003 2:39
PM
Subject: ShopTalk: Date: Mon, 15 Sep 2003
17:39:48 -0400
George,
As I recall, the Apache PM-30i (now the MFS 30+) R1 was about 283 cpm raw.
I found that 275 cpm was what I needed...picked up 10-15 yards in that much
softening, and it still feels stiff to me. I'd guess the Powerflex FW-501 would
play about 3 or 4 cpm softer than the R1 Apaches,
Dave,
Are the GS shafts sheet-wrapped? I've noticed that the inexpensive
sheet-wrapped iron shafts which I have tried have larger spines, are not as
consistent, nor play as well as the inexpensive filament wound iron shafts.
The Carbon Stick torque is a full point higher trhan the FW-501s, too.
Hey Bernie, send it to me
to...df
- Original Message -
From:
Bernie
Baymiller
To: [EMAIL PROTECTED]
Sent: Monday, September 15, 2003 6:59
PM
Subject: Re: ShopTalk: Again
George,
As I recall, the Apache PM-30i (now the MFS 30+) R1 was about 283 cpm
Bernie Baymiller said:
Are the GS shafts sheet-wrapped? I've noticed that the inexpensive
sheet-wrapped iron shafts which I have tried have larger spines, are not
as consistent, nor play as well as the inexpensive filament wound iron
shafts.
The Carbon Stick torque is a full point higher
Don,
I tried to send you the attachment, but your spam-blocker wouldn't let it
through.
BernieWriteto: [EMAIL PROTECTED]
- Original Message -
From:
Don Flatgard
To: [EMAIL PROTECTED]
Sent: Monday, September 15, 2003 9:33
PM
Subject: Re: ShopTalk: Again
Hey
19 matches
Mail list logo
