In a message dated 1/7/2008 8:09:25 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
>
> I wasn't planning on tipping it, but it has already been sanded and even
> angled for the bore thru - so I will have to square off the end which will
> effectively tip a little.
>
> Thanks for the sk c
I wasn't planning on tipping it, but it has already been sanded and even angled
for the bore thru - so I will have to square off the end which will effectively
tip a little.
Thanks for the sk comparison - I currently play a tour trac 80 and like it a
lot. I think I'll try the YS-6+ withh the 6
In a message dated 1/7/2008 3:03:40 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
>
> I did some internet searching, and I came back with .335 for the 905T.
> If that is wrong, please let me know.
>
> Now for a couple of tougher questions. How is the YS-6+? The shaft is
> a stiff? Does
Just did a 905R and the tip was .335". The shaft will play stiffer in a
bore thru. More like a XS.
Pat-On Target Golf LLC
Turnersville, NJ
[EMAIL PROTECTED]
- Original Message -
From: "Steve Longeway" <[EMAIL PROTECTED]>
To:
Sent: Monday, January 07, 2008 7:17 PM
Subject: Re: ShopTalk
IMHO - I would say the YS-6+ definitely plays stiff. I have one in
my 3-wood and really like it.
On Jan 7, 2008, at 6:00 PM, Brian Parkinson wrote:
I did some internet searching, and I came back with .335 for the 905T.
If that is wrong, please let me know.
Now for a couple of tougher questi
I did some internet searching, and I came back with .335 for the 905T.
If that is wrong, please let me know.
Now for a couple of tougher questions. How is the YS-6+? The shaft is
a stiff? Does it play soft/stiff? If it is already tip prepared for a
titleist bore thru, will it basically be unpl
Does anyone in shoptalk do metal wood refinishing? If so, how much do
you charge? I have 3 heads that need to be done.
Thanks!
Jeff
Golf Provisions
Largo, FL
[EMAIL PROTECTED]
My buddy ordered a replacement shaft for a Titleist 905T . Before he
repaced the shaft, he sold the driver, and said I can have it if it will
work for me. I am looking a getting a Snake Eyes Python Plus (.350) or
a SE 655TJ (.335). It's a Graphite Design YS-6, so I think it should be
a good shaf
Test - sorry, I tried to post and I don't think it worked.
Brian Parkinson
Director of Accounting and Taxation
Ball Ventures, LLC
901 Pier View Drive, Suite 201
P. O. Box 51298
Idaho Falls, ID 83405
Phone: (208) 523-3794
Fax: (208) 227-0445
[EMAIL PROTECTED]
-Original Message-
From: [EM
True Temper TX-90 taper tips are close.
TFlan
--- Maurice Hickey <[EMAIL PROTECTED]> wrote:
> Jentlemen,
> I can't seem to find my replacement shaft lists.
> What is the correct True
> Temper shaft to replace a broken Big Bertha iron, a
> Callaway "constant
> weight uniflex" shaft?
> Thanks,
>
Second thoughts. Come to think about it, forget the
taper tip - a parallel tip works just fine. You can
slit the tip with a Dremel-type tool the same way
Callaway does, rough it up, epoxy, and pound a plug
into it after grinding it flush. The hosels are .370"
except at the very bottom, where they'r
Jentlemen,
I can't seem to find my replacement shaft lists. What is the correct True
Temper shaft to replace a broken Big Bertha iron, a Callaway "constant
weight uniflex" shaft?
Thanks,
Moe
12 matches
Mail list logo