how do i check the c/s with a laser ? what am i looking for,, thanks geo.
this page cannot be found ??
>http://www.circuitspecialists.com/prod.itml/icOid/7859
please resend,, thanks, geo.
Terry,
If your power supply has current limit regulation, do as Mike recommends below. Set the voltage so
that you get about 7 amps of current, for example, then reduce the current limit setting so that it
regulates at 6 amps. The power supply will automatically reduce the voltage to limit th
CS Calculations, Dan Nave.doc
When I started looking into how to make CS one of the main problems I encountered was how to
customize my setup for the materials I might have access to, how to tell when the CS was done, and
what concentration it was.
As a starting point Bob Lee, in his post of
Wayne,
The way I understand it is that Faraday determined that the amount of metal released from the anode
during electrolysis is proportional to the current flowing thru that electrode and the time that
that current flows. Different metals would have different values for "k" but for any parti
Smitty,
My experience has always been the longer it runs the thicker it gets and that
is not what we want. The best CS is the clearest, smallest particle you can
brew. This is how Terry Chamberlain told us to do it (and it works!):
Set your timer. Brew a batch until it starts gett
This is a reply to the person who was not up to making
a unit. That is fine, but it is so easy, it is almost
a no brainer to make a simple battery unit. Then it
only takes an hour or so to make a liter, you have to
watch it the last 20 minutes fairly carefully to see
the ions coming off the silver
Mike said,
>The full flow rate is going thru your clear 3/4 inch
chamber now, right? And that is 10 gallons per minute
or thereabout.<
No, I dont have a unit built with the clear tubing I
mentioned. That is what I intend to use. Right now,
the rancher is using my regular device that produces
10 g
Original Message
Subject: Re: CS>Got the Lyme bug
Date: Sun, 19 Nov 2006 08:38:18 -0800
From: Dave
To: rainis...@earthlink.net
References: <380-22006110195649...@earthlink.net>
I found that it is more important to dose often than to take a lot at
once.
I had Lyme for 42 y
Thanks Dan,
For explaining this and for the longer post with all the details.
I do understand all this very well.
Long before I heard of the Faraday method, I made a post about
what I called a "Wattage Factor".
I stated briefly that this "Wattage Factor" used in the process
actually was a m
*Hi * to you all,
After 8 hours or so the colloidal silver I make is supposed to be
ionised in greater part & it measures between 10 to 11 ppm
by use of the PWT by Hanna using 1.6 mS=1 ppm.
After 24 hours it is down to 7 or 8 ppm & after a further day it is
down again.These precipitous fal
Doesn't CS kill rabies? I've used it in animal rescue for years and have seen
it kill distemper and more/ I use it straight no water added in their water
dishes when I know they've come from the pound, are looking ill or are illI
use it in my water and my dogs water dishes too.. as an ad
Dont touch it with a barge pole
Sandee
Peace is easy ... it is a Mindset
Home - 61893676734
cel - 61421540908
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: sil
Hi, I used to have one that used 3 9volt batteries. Is there someone on list
who makes them? I'm legally blind and don't have the eyesight to make my
own...Thanks very much! Cheryl
OK, I am desperately wanting to start making my own cs for family and the
family dog...
I am SO confused though, on how to exactly build one for QUICK, EASY and
CHEAP!
Can someone email me off loop to help me get started?
Thank you so much for all the info shared here!
SherryB in AZ b
Cheryl, we are on the same wavelength here..if you find out a simple, cheap
easy way please let me know also
SherryB in AZ
bee...@frontiernet.net
Subject: CS>want a simple cs generator
Hi, I used to have one that used 3 9volt batteries. Is there someone on list
who makes them? I'm leg
Yes me. I'm technologically challenged - so was looking for something simple
Kirsteen
On 11/19/06, CHERYL HOLMES wrote:
Hi, I used to have one that used 3 9volt batteries. Is there someone on
list who makes them? I'm legally blind and don't have the eyesight to make
my own...Thanks very m
Ok I'd much rather make one than pay $199 plus shipping to the UK if it
really is simple. How do I go about it, please
Kirsteen
On 11/19/06, bs clayton wrote:
This is a reply to the person who was not up to making
a unit. That is fine, but it is so easy, it is almost
a no brainer to make a s
Wayne,
I don't think it is quite right to call it the "Wattage" Factor.
We don't care what the VoltAmps (Watts) are; we care what the AmpSeconds
(Coulombs) are.
For a cell with fixed electrodes, the VoltAmps (Watts) will be proportional to the final ppm. But
what happens when you move the el
this is V's site http://www.cheap-zappers.com/silvermaker.htm he is also in
this group.debbie
-
Sponsored Link
Mortgage rates near 39yr lows. $420,000 Mortgage for $1,399/mo - Calculate new
house payment
This is my third try to post this. For some reason it isn't getting through.
Dave
Dave wrote:
Original Message
Subject: Re: CS>Got the Lyme bug
Date: Sun, 19 Nov 2006 08:38:18 -0800
From: Dave
To: rainis...@earthlink.net
References: <380-22006110195649...@earthlink.net>
I
The stream length and velocity is interesting and does relate to
the process.
The small pipe 3/4 inch is only .4417 cross sectional area.
This makes the length of one gallon 522 inches.
Thus, 10 gallons is 5220 inches.
The rate of 10 gallons per minute passes 87 inches past the
electrodes
The stream length and velocity is interesting and relates to the process.
Due to the small pipe, 3/4 inch, the length of the stream is
relatively long.
The cross sectional area of the 3/4 inch pipe is. .44 17 inches.
This makes one gallon have a length of 522.97 inches.
Thus 10 gallons
PS Don't turn on the current before establishing the water flow!
Dan
---
* From: * Dan Nave[SMTP:na...@comcast.net]
* Subject: * Re: FW: CS>Re: Mink rancher ( Stream Length and Velocity )
Wayne,
I wouldn't necessarily choose this way to look at the pr
Wayne,
I wouldn't necessarily choose this way to look at the problem unless you had
some way to meter the
water flow. Of course, especially if you could not achieve the 6 amp current
level, you could slow
down the flow and thereby increase the ppms.
Using your values, 631 ml of water for 1 se
>From: Deborah Gerard
>Date: 2006/11/19 Sun PM 07:00:13 CST
>To: cs
>Subject: CS>Cheap silver maker
>this is V's site http://www.cheap-zappers.com/silvermaker.htm he is also in
>this group.debbie
> Sponsored Link
>
i bought on of V's 30 buck units for my sister in law in tucson, and she
Hi There to you Cheryl - he is on TV every Saturday or Sunday - so check
him out there,
Warmest regards
Sandee
Peace is easy ... it is a Mindset
Home - 61893676734
cel - 61421540908
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are post
Evening Dan,
>>At 10:35 PM 11/19/2006, you wrote:
I wouldn't necessarily choose this way to look at the problem unless
you had some way to meter the water flow.
I doubt that the flow rate is exactly 10 gpm thru the 3/4 pipe.
Of course if they know how long it takes to fill a tank, that is
28 matches
Mail list logo
