Re: [sipx-users] Sipx latest stable 3.10.3 issue: INTERNAL SERVER

Cuneyt M wrote: > Hi again Scott, > With a bit of luck, i managed to find the firmware version > *5.40A.026.004* and updated the two MP118 we have. Could you please provide the link you found to the latest MP118 firmware? -- Norman Branitsky +1 416.798.7948 Chernia

Re: [sipx-users] block caller-id presentation for group

milosz wrote: > er, running 3.10.3. > > On Fri, Mar 20, 2009 at 7:31 PM, milosz > wrote: > > hi all, > > do i need to do something special to block caller-id for an entire > group other than checking the box and hitting apply? it seems to > work fine fo

Re: [sipx-users] Caller ID

It didn't work initially for me via sipx (3.10.2), so I just set the caller-id on the mediant 1000 gateway for specific extensions. I imagine that there's a setting on the gateway to properly receive caller-id information from sipx, but I didn't spend much time looking into it. Also, my telco did

Re: [sipx-users] Caller ID

as i said in a previous email, which maybe wasn't clear enough, blocking caller id on a per-group basis does not work for me. is it working for other people? On Wed, Mar 25, 2009 at 4:56 PM, Damian Krzeminski wrote: > McCoy, Chris wrote: >> I have a customer, they are looking to put caller id on

Re: [sipx-users] Caller ID

McCoy, Chris wrote: > I have a customer, they are looking to put caller id on their lines, but > want to mask that caller id on certain phones, so that it does not > display the caller id, it is in a bank setting so the caller id for > these people are not important. > > Can it be done or is it ju

[sipx-users] Caller ID

I have a customer, they are looking to put caller id on their lines, but want to mask that caller id on certain phones, so that it does not display the caller id, it is in a bank setting so the caller id for these people are not important. Can it be done or is it just a system wide setting either

Re: [sipx-users] Sipx latest stable 3.10.3 issue: INTERNAL SERVER ERROR

whoops, brain fart. my apologies. On Wed, Mar 25, 2009 at 2:41 PM, milosz wrote: > send an audiocodes syslog capture also. > > On Tue, Mar 24, 2009 at 7:37 PM, Scott Lawrence > wrote: >> On Wed, 2009-03-25 at 06:30 +0800, Cuneyt M wrote: >>> Hi everyone, >>> >>> I just make a new installation f

Re: [sipx-users] Sipx latest stable 3.10.3 issue: INTERNAL SERVER ERROR

send an audiocodes syslog capture also. On Tue, Mar 24, 2009 at 7:37 PM, Scott Lawrence wrote: > On Wed, 2009-03-25 at 06:30 +0800, Cuneyt M wrote: >> Hi everyone, >> >> I just make a new installation for a new site with sipx 3.10.2 Centos >> ISO (updated via stable repo to 3.10.3..) and AudioCod

Re: [sipx-users] FAX adaptor

It's extremely important to turn off Error Correction on the Fax. Some have the ability to turn it off in setup, some require the manufacturer to call into the fax to disable it. Some turn themselves back on when they get a G3 connection, so you have to watch for that. One symptom of Error

Re: [sipx-users] FAX adaptor

I can't recommend a specific adapter, but I can recommend against a couple of adapters when it comes to faxing. The Linksys 3102 analog-to-digital adapter doesn't jive well with fax machines. While it does work some times, there are quite a lot of fax machines that will refuse a fax sent from a f

Re: [sipx-users] Modem Over IP with SipXecs

Theoretically it should work fine. You need to be more specific whether or not the gateway or ata adapter also supports t.38 or not. If your outside connection is POTS it should be ok using g711ulaw as fax bypass but t.38 is "better". Your fax call traversing over ip from the gateway to your a

Re: [sipx-users] Modem Over IP with SipXecs

On Wed, 2009-03-25 at 08:52 -0600, Eric Nichols wrote: > > > I am testing SipXecs as a replacement to my old TDM PBX. I will need > to be able to do “modem over IP”, or at least use standard 56k modems, > going throught a Dialogic 8 port Media Gateway. Is this possible with > SipXecs and my Dial

[sipx-users] Modem Over IP with SipXecs

I am testing SipXecs as a replacement to my old TDM PBX. I will need to be able to do "modem over IP", or at least use standard 56k modems, going throught a Dialogic 8 port Media Gateway. Is this possible with SipXecs and my Dialogic 8 port analog gateway? Has anyone ever tried this? __

Re: [sipx-users] FAX adaptor

Both your inbound gateway and FXS gateway need to support T.38 fax protocol. I'd stick with the same brand too, that way you only have one finger to point. Again, I'd go with the Pattons. Mike From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On

Re: [sipx-users] Configuration of Callgroup with Call forwardings breaks whole SipXecs down

On Wed, 2009-03-25 at 13:25 +0100, Rene Pankratz wrote: > Hello, > > We figured out a serious issue, that causes the sipXproxy process to > take 100% CPU-usage and and breaks down the whole SipXecs. > We can reproduce this behaviour on SipX 3.10.2, SipX 3.10.3 and > 3.11.12-014925. > > The foll

Re: [sipx-users] Configuration of Callgroup with Call forwardingsbreaks whole SipXecs down

>>> On 3/25/2009 at 8:25 AM, in message <49ca22a4.4070...@fh-wolfenbuettel.de>, Rene Pankratz wrote: > Hello, > > We figured out a serious issue, that causes the sipXproxy process to > take 100% CPU-usage and and breaks down the whole SipXecs. > We can reproduce this behaviour on SipX 3.10.2, Si

Re: [sipx-users] sendmail configuration error

Try #> yum install sendmail-cf -MM On Wed, Mar 25, 2009 at 8:34 AM, Keith Gearty wrote: > I'm trying to rebuild the sendmail.cf file on my SipX server, but there > seems to be an import error in the sendmail.mc file that comes with > SipX.  Since this is a configuration issue specific to the Sip

[sipx-users] Configuration of Callgroup with Call forwardings breaks whole SipXecs down

Hello, We figured out a serious issue, that causes the sipXproxy process to take 100% CPU-usage and and breaks down the whole SipXecs. We can reproduce this behaviour on SipX 3.10.2, SipX 3.10.3 and 3.11.12-014925. The following steps lead to this problem: Create a hunt-group (e.g.extension 800

[sipx-users] sendmail configuration error

I'm trying to rebuild the sendmail.cf file on my SipX server, but there seems to be an import error in the sendmail.mc file that comes with SipX. Since this is a configuration issue specific to the SipX installation of sendmail, I decided to bring the issue here. I run the command: m4 /etc/ma

Re: [sipx-users] cordless phones

Any idea where I would find details on this? I had a quick Google but came up empty. I have an issue with wireless on my site as I need to try and find a relatively cheap intrinsically safe phone. The villages are all blast proof cabins, but if I install a wireless phone they can walk away wi

[sipx-users] FAX adaptor

Hi gang, I've been asked to install a fax machine in the little portacabin village where I'm running my Sip-X phone installation. Anyone got any recommendations on a decent adaptor, I don't want to make a noob error like I did buying my Audiocodes gateway? Is there anything else I should be

Re: [sipx-users] cordless phones

Snom has a new wireless deskphone coming that might work for this application. Mike From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of kenny.mitch...@ineos.com Sent: Tuesday, March 24, 2009 5:43 AM To: sipx-users@list.sipfoundry.org Sub