Re: [sipx-users] How to integrate SIPX 4.0 with Call manager 5.0

I am having the same problem some time ago. The difference is I use another server sipXecs as ITSP. Try to use DNS domain name in the ITSP domain name, and use ip address or full hostname (with domain) in ITSP server address. I hope that could help From: Emery ville [mailto:emeryvill

Re: [sipx-users] How to integrate SIPX 4.0 with Call manager 5.0

That's not how I'd go about it... I'd setup the Call Manager box as a gateway on the sipX box and then make a dial plan that looks for the extensions on the Call Manager box and routes them out that gateway. Mike From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@li

Re: [sipx-users] Phones behind Nat/Pat firewall do not work

Well, he said he tested behind his ASA and it didn't work... the reason it didn't is because the SIP ALG is on by default in the ASA. With the sipX box running outside the firewall there is no need for the SBC on the sipX box. Point your phones at stun01.sipphone.com for a stun server and it sho

Re: [sipx-users] Phones behind Nat/Pat firewall do not work

His server has a public ip address. -Original Message- From: "Picher, Michael" To: Tony Graziano To: Emery ville Cc: Sent: 6/30/2009 9:27:01 PM Subject: RE: [sipx-users] Phones behind Nat/Pat firewall do not work I have sipXecs 4.0.1 running behind an ASA and phones out anywhere on

Re: [sipx-users] Phones behind Nat/Pat firewall do not work

I have sipXecs 4.0.1 running behind an ASA and phones out anywhere on the Internet (behind NAT or not). Turn off the SIP application layer gateway in the ASA and map the required ports back to the sipX box from the outside interface (UPD 5060, 3 - 31000). Mike From: sipx-users-boun.

[sipx-users] How to integrate SIPX 4.0 with Call manager 5.0

Hello friends, I am having trouble integrating SIPX 4.0 with Call manager 5.0 I established a sip trunk between both but the sip trunk never is up, I am actually not sure if the sip trunk is up. I cannot make any calls between the servers. what I did : Logged in to Https as superadmin and did th

Re: [sipx-users] Phones behind Nat/Pat firewall do not work

Hey Tony, I am using SIPX ver 4.0. My server has a static IP address and I do not have a stun server. I have tested the SIPX server in the private subnet with the phones and later gave it a public IP address, with which all the phones are able to register but they cannot make calls. The firewalls

Re: [sipx-users] Book

Here you go Scott... http://www.packtpub.com/building-enterprise-ready-telephony-systems-with -sipxecs-4-0/book Paper should be out in August. Thanks, Mike From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Gilmour, Scott Sen

Re: [sipx-users] Gateway Suggestion for testing

Sorry if this is a couple days late... we do have some good config examples in the Wiki for the Patton that can help tremendously. Mike -Original Message- From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Keith Gearty Sent: Monday,

Re: [sipx-users] Phones behind Nat/Pat firewall do not work

What version of sipx are you using? Is your server IP statc or using STUN? Did you remove the subnets in the schema that are not part of your local network? Are any of the remote firewalls using an Application Layer Gateway on the firewall? >>> Emery ville 06/30/09 5:02 PM >>> Hello ! I have s

[sipx-users] Phones behind Nat/Pat firewall do not work

Hello ! I have setup up my SIpxecs server on a public ip address and I have phones from different private networks trying to connect to the SIPxecs server. But they are behind Nat and Pat firewalls. They manage to register themselves with the server but donot speak to themselves. There are no succ

Re: [sipx-users] SCS

I still have a lasting bruise when I ran into that about 18 months ago. I liked the performance aspect of the first vpro machines so I got a few and use one as a daily desktop still. Installing Linux on a couple got me bruised pretty easily. When I researched the errors, I actually got things t

Re: [sipx-users] SCS

Tony I can't believe that worked-you're a genius, Thank-you!!! May I contact you off list. Bob Anderson COMSOURCE Technologies Inc 3585 Laird Road, Unit 13 Mississauga,ON L5K 5Z8 905.608.1400 x237 -Original Message- From: Tony Graziano [mailto:tgrazi...@myitdepartment.net] Sent: June-3

Re: [sipx-users] SCS

you will probably have to add this to grub to boot the system afterwards. hda=noprobe hdc=noprobe Google "installing centos on dc7800" will tell you more than I can, but they are just like the 7800's from a board/chipset standpoint. >>> "Bob Anderson" 06/30/

Re: [sipx-users] SCS

On Tue, 2009-06-30 at 16:26 -0400, Bob Anderson wrote: > Hello- Hope someone can help > > > > I am trying to install SCS 3.0 on a HP dc7800 PC with Vista Business > installed on it. The machine boots to the SCS set up screen, here I > type manual install, the system starts and loads a coupl

Re: [sipx-users] SCS

It has everything to do with the vpro chipset try: linux pci=nomsi,nommconf hda=noprobe hdc=noprobe >>> "Bob Anderson" 06/30/09 4:27 PM >>>

[sipx-users] SCS

Hello- Hope someone can help I am trying to install SCS 3.0 on a HP dc7800 PC with Vista Business installed on it. The machine boots to the SCS set up screen, here I type manual install, the system starts and loads a couple of lines and then just stops. I installed a different hard drive -

Re: [sipx-users] Routing incoming PSTN or GSM calls

For PSTN and GSM I use respectively Audiocodes MP-108 and Sun Comm SC-375. Audiocodes call routing works. Check out Automatic Dialing on page 18 of this guide... http://www.pingtel.com/onlinedocs/AudioCodes/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Working_with_Your_Gateway&file=AudioCodes_v46a

Re: [sipx-users] sipx an PhonerLite

Thanks for the fast analysis. I will contact the maker of phoner/phonerlite so that they can solve the issue (and make them aware of SipX). Strange that it worked for Todd Hodgen Best regards / Mit freundlichen Grüßen / Sincères salutations Paul Scheepens "Scott Lawrence" wrote on 30-06-2009

Re: [sipx-users] Increasing ring-time for extension??

On Tue, 2009-06-30 at 10:50 +1000, Dave Nedved wrote: > > Ok, Cheers mate... > > Is there any way to individually set it per user? It is being worked on -- see http://track.sipfoundry.org/browse/XX-4849 Dale ___ sipx-users mailing list sipx-users@

[sipx-users] Scalability figures

Hi, I wonder if anyone has experience with SipX scalability. We have set up a load test on a pretty muscular machine (3GHz processor) and sipxproxy process eats up all the CPU power at around 8 request/sec. If I calculate with BHCA (busy hour call attempt)=4, this yields about 7200 users. A

Re: [sipx-users] sipx an PhonerLite

On Tue, 2009-06-30 at 14:31 +0400, Nikolay Kondratyev wrote: > Paul, > > The problem is that phoner changes the To Tag in the second Register > message. > > The To header should be the same (including “tag” field). > > It is somewhere in rfc 3261, as far as I remember. RFC 3261 section 8.1.

Re: [sipx-users] Gateway Suggestion for testing

>Hope those help. I'll get around to adding them to the wiki at some point. Keith, Appreciate that info. I will order a small Patton unit and I hope all goes well! Thanks for the info, jlc ___ sipx-users mailing list sipx-users@list.sipfoundry.org Lis

Re: [sipx-users] Moving SipX Server

I had this headache as well a month or so ago. Here's a quote from a post back then on how to sort it: >if you installed on Centos >edit > >/etc/sysconfig/networking-scripts/ifcfg-eth0 > >(assuming eth0 is your Ethernet card) > >then restart network services > >service network restart Regards,

Re: [sipx-users] Moving SipX Server

William Alianto wrote: > Hi, > > I have a SipX server at my local network. I'm planning to move it to > another network. But when I adjust the IP setting for the new network, > the server components stop working. Could somebody give me a guide on > how to re-configure a SipX server on different ne

Re: [sipx-users] Gateway Suggestion for testing

natif wrote: >but even with patton (MP4114) >I've some issue (call not hangup when called hangup, call cut...). >Issue are send to the support of Patton, waiting for an answer (but >support tell me that they are working on...). > Here are the 2 main issues I encountered with the Patton gateways,

Re: [sipx-users] sipx an PhonerLite

Paul, The problem is that phoner changes the To Tag in the second Register message. The To header should be the same (including “tag” field). It is somewhere in rfc 3261, as far as I remember. Nikolay. _ From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list

[sipx-users] Moving SipX Server

Hi, I have a SipX server at my local network. I'm planning to move it to another network. But when I adjust the IP setting for the new network, the server components stop working. Could somebody give me a guide on how to re-configure a SipX server on different network without re-install the whole

Re: [sipx-users] sipx an PhonerLite

Sorry, that was a different softphone. Phoner actually supports SRV records, but I can't get it to register as well Here a trace of a registration attempt: Best regards / Mit freundlichen Grüßen / Sincères salutations Paul Scheepens Paul Scheepens/EPO 30-06-2009 10:17 To sipx-users@list.

Re: [sipx-users] sipx an PhonerLite

I have tested both phonerlite and phoner. Both unfortunately don't support SRV records. I am now using Zoiper, also because it has native support for a low cost USB phone I use. Best regards / Mit freundlichen Grüßen / Sincères salutations Paul Scheepens > - Message from "Todd Hodgen" on

Re: [sipx-users] unable to specify FTP directory

+1 Agreed. The fact that you can't select a path on the FTP server in which to upload the backup is crippling IMO. Keith. Matt Keys wrote: >>From the web interface: System -> Backup, then specify FTP. I get a >IP/Hostname box, username, password. If I enter just the IP or hostname >it'll work,

[sipx-users] R: display caller id on polycom 330

> You'll find that value is coming from your inbound PSTN gateway (or SIP > trunk); to change it you need to deal with that directly, since sipXecs > does not modify inbound From headers. Thank you for the suggestion. The Polycom write "unknown" because no Display Name is provided in the From hea

Re: [sipx-users] Gateway Suggestion for testing

Hello, I 've tested a Gateway MP408 (4*BRI). The quality of the sound is very good, but I've an issue, the gateway reboot sometimes and it can append often if you use it intensively (with the 4 ports). My customer have only 2 BRI, so the reboot seams not disturbe them. I send lots of log to my dist