Created http://track.sipfoundry.org/browse/XX-9995 to get this improved.
Paul
Worley, Dale R (Dale) dwor...@avaya.com wrote on 12-12-2011 18:29:02:
From: Michael Picher [mpic...@ezuce.com]
I think the default install has always installed with weight 0 SRV
records.
Well, it
DNS MODE MANUAL is not suggested on an HA secondary system. It tends to
break HA when you change it because the setting cannot be pushed down to
the other servers.
I think you might want to look instead at the timing of the records, etc.
and whether you sent profiles after making the change to
Hi,
I have followed Sipx wiki and it looks to say that I need to put Manual on
all servers like it has been indicated in one of the comment of Josh patten
at the bottom of this link, he said *That being said, the mode does need
to be changed to manual on all of the secondary servers, so I'll
If you are going to change to manual, i'd change on all of your servers.
Then you just need to keep up with any zone file changes...
Mike
On Mon, Dec 12, 2011 at 10:30 AM, Cyril Constantin
cyril.constan...@gmail.com wrote:
Hi,
I have followed Sipx wiki and it looks to say that I need to
Hi Micheal,
It's what I did but incoming calls work only for primary and redundant
reject it and send calls to voicemail, maybe my named.conf has a wrong
setting but I can't figure out.
Regards.
2011/12/12 Michael Picher mpic...@ezuce.com
If you are going to change to manual, i'd change on
Do your dns tests from each box... and as a client (phone / softphone)
might.
Check the wiki for these tests.
http://wiki.sipfoundry.org/display/sipXecs/DNS+Concepts+for+sipXecs
whether these things are set to master / slave or set to manual makes no
difference if DNS is working properly.
mike
I'll try again tonight to have it working, it's difficult for me to do it
during the day without interrupting users.
I'll let you know.
Regards
2011/12/12 Michael Picher mpic...@ezuce.com
Do your dns tests from each box... and as a client (phone / softphone)
might.
Check the wiki for
From: cyril constantin [cyril.constan...@gmail.com]
Like I have posted three months ago Bria 3.2.1 (the latest) doesn't support
DNS SRV with Weight of 0 for the three servers [...]
I may be uninformed about the latest changes, but why are you using weight = 0
in DNS SRV?
That has always
Dale,
I think the default install has always installed with weight 0 SRV records.
Mike
On Mon, Dec 12, 2011 at 12:17 PM, Worley, Dale R (Dale)
dwor...@avaya.comwrote:
From: cyril constantin [cyril.constan...@gmail.com]
Like I have posted three months ago Bria 3.2.1 (the latest) doesn't
From: Michael Picher [mpic...@ezuce.com]
I think the default install has always installed with weight 0 SRV records.
Well, it shouldn't!
Dale
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive:
-To: Discussion list for users of sipXecs software
sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] DNS SRV - HA Cluster
From: Michael Picher [mpic...@ezuce.com]
I think the default install has always installed with weight 0 SRV records.
Well, it shouldn't!
Dale
11 matches
Mail list logo