I'll try again tonight to have it working, it's difficult for me to do it during the day without interrupting users.
I'll let you know. Regards 2011/12/12 Michael Picher <mpic...@ezuce.com> > Do your dns tests from each box... and as a client (phone / softphone) > might. > > Check the wiki for these tests. > http://wiki.sipfoundry.org/display/sipXecs/DNS+Concepts+for+sipXecs > > whether these things are set to master / slave or set to manual makes no > difference if DNS is working properly. > > mike > > > On Mon, Dec 12, 2011 at 10:55 AM, Cyril Constantin < > cyril.constan...@gmail.com> wrote: > >> Hi Micheal, >> >> It's what I did but incoming calls work only for primary and redundant >> reject it and send calls to voicemail, maybe my named.conf has a wrong >> setting but I can't figure out. >> >> Regards. >> >> >> 2011/12/12 Michael Picher <mpic...@ezuce.com> >> >>> If you are going to change to manual, i'd change on all of your servers. >>> >>> Then you just need to keep up with any zone file changes... >>> >>> Mike >>> >>> >>> On Mon, Dec 12, 2011 at 10:30 AM, Cyril Constantin < >>> cyril.constan...@gmail.com> wrote: >>> >>>> Hi, >>>> >>>> I have followed Sipx wiki and it looks to say that I need to put Manual >>>> on all servers like it has been indicated in one of the comment of Josh >>>> patten at the bottom of this link, he said *"That being said, the mode >>>> does need to be changed to manual on all of the secondary servers, so I'll >>>> update the page."* >>>> >>>> >>>> http://wiki.sipfoundry.org/display/sipXecs/Location+based+DNS+views+for+sipXecs+using+BIND >>>> >>>> >>>> >>>> So regarding what you are saying Tony if I understood I need to change >>>> to Manual on Master keep "Slave" on redundant make all my changes on Master >>>> and do "send profiles" , is that correct? >>>> >>>> Regarding wiki link above they say: >>>> >>>> If the installer changes the DNS_MODE in named.conf from "Master" to >>>> "Manual" then the *.zone file will no longer be automatically generated on >>>> the primary server. The installer can then add additional DNS names to the >>>> *.zone file and they won't get overwritten by the system. The installer >>>> will then be responsible for changing the serial number in the zone file so >>>> that it gets automatically copied to the slave DNS servers. >>>> >>>> In my case I expect that my changes are not overwritten by the system. >>>> >>>> Is not very explicit for my point of view on the wiki, if somebody can >>>> clarify it for the way to proceed with manual change on master server? >>>> >>>> Thanks to all >>>> >>>> >>>> 2011/12/12 Tony Graziano <tgrazi...@myitdepartment.net> >>>> >>>>> DNS MODE MANUAL is not suggested on an HA secondary system. It tends >>>>> to break HA when you change it because the setting cannot be pushed down >>>>> to >>>>> the other servers. >>>>> >>>>> I think you might want to look instead at the timing of the records, >>>>> etc. and whether you sent profiles after making the change to the master. >>>>> >>>>> On Mon, Dec 12, 2011 at 9:20 AM, cyril constantin < >>>>> cyril.constan...@gmail.com> wrote: >>>>> >>>>>> Hi Guys, >>>>>> >>>>>> I have HA cluster with three servers. >>>>>> >>>>>> Like I have posted three months ago Bria 3.2.1 (the latest) doesn't >>>>>> support DNS SRV with Weight of 0 for the three servers and will always >>>>>> use >>>>>> the same server to register all phone which is annoying to load balance >>>>>> all >>>>>> my users on the three servers so to prevent this problem I have changed >>>>>> my >>>>>> zone and put a weight of 33 for all three servers which is working fine >>>>>> and >>>>>> all users are load balanced on three servers, if I don't want to have >>>>>> these >>>>>> settings erased by sipxecs I need to change the named.conf DNS_MODE to >>>>>> manually, but I'm facing some issues when I'm changing it to manually on >>>>>> all servers, I can't figure out it yet (incoming calls only works when >>>>>> coming into primary when they are coming on the redundant servers the >>>>>> calls >>>>>> goes straight to voicemail 's users) >>>>>> >>>>>> My current configuration: >>>>>> 10.147.113.221 : primary server >>>>>> 10.147.113.222 : redundant server >>>>>> 10.147.113.223 : redundant server >>>>>> >>>>>> *I have tried on primary server to configure named.conf like below:* >>>>>> >>>>>> // DNS_MODE="Manual" >>>>>> >>>>>> options { >>>>>> directory "/var/named"; >>>>>> dump-file "/var/named/data/cache_dump.db"; >>>>>> statistics-file "/var/named/data/named_stats.txt"; >>>>>> forwarders { >>>>>> 10.147.113.10; >>>>>> 10.147.113.11; >>>>>> }; >>>>>> >>>>>> >>>>>> }; >>>>>> >>>>>> >>>>>> zone "webcti.local" IN { >>>>>> type master; >>>>>> file "webcti.local.zone"; >>>>>> allow-update { none; }; >>>>>> allow-transfer { >>>>>> >>>>>> 10.147.113.10; >>>>>> 10.147.113.11; >>>>>> 10.145.108.10; >>>>>> 10.147.113.222; >>>>>> 10.147.113.223; >>>>>> }; >>>>>> allow-query { >>>>>> 10.147.113.0/24; >>>>>> 10.145.108.10; >>>>>> }; >>>>>> notify yes; >>>>>> }; >>>>>> >>>>>> *On both redundant servers:* >>>>>> >>>>>> // DNS_MODE="Manual" >>>>>> >>>>>> options { >>>>>> directory "/var/named"; >>>>>> dump-file "/var/named/data/cache_dump.db"; >>>>>> statistics-file "/var/named/data/named_stats.txt"; >>>>>> }; >>>>>> >>>>>> zone "webcti.local" IN { >>>>>> type slave; >>>>>> file "data/webcti.local.zone"; >>>>>> masters {10.147.113.221;}; >>>>>> allow-notify {10.147.113.221;}; >>>>>> notify no; >>>>>> }; >>>>>> >>>>>> >>>>>> on redundant servers into /etc/resolv.conf >>>>>> nameserver 127.0.0.1 >>>>>> >>>>>> rndc reload and serial number increased and named service restarted >>>>>> on primary server >>>>>> >>>>>> My incoming calls are coming from Asterisk to Sipxecs with sip trunk >>>>>> and asterisk use srvlookup to resolve the zone webcti.local. It's working >>>>>> fine until I change the named.conf to "Manual" and make my changes above. >>>>>> >>>>>> So if I use configuration above I have only one incoming calls on >>>>>> three which is working. >>>>>> >>>>>> Any idea on this problem ? Do I miss something ? >>>>>> >>>>>> Can it be possible to have in Admin GUI a webpage where you can set >>>>>> the weight per server (even priority) without modifying the DNS mode and >>>>>> keep SIPXecs manage DNS ? >>>>>> >>>>>> >>>>>> >>>>>> Thanks a lot in advance for your help and any ideas will be >>>>>> appreciated. >>>>>> >>>>>> Best Regards. >>>>>> >>>>>> Cyril >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> sipx-users@list.sipfoundry.org >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> ====================== >>>>> Tony Graziano, Manager >>>>> Telephone: 434.984.8430 >>>>> sip: tgrazi...@voice.myitdepartment.net >>>>> Fax: 434.465.6833 >>>>> >>>>> Email: tgrazi...@myitdepartment.net >>>>> >>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>> Telephone: 434.984.8426 >>>>> sip: helpd...@voice.myitdepartment.net >>>>> >>>>> Helpdesk Customers: http://myhelp.myitdepartment.net >>>>> Blog: http://blog.myitdepartment.net >>>>> >>>>> Linked-In Profile: >>>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>>> Ask about our Internet Fax services! >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> sipx-users@list.sipfoundry.org >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> sipx-users@list.sipfoundry.org >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> Michael Picher, Director of Technical Services >>> eZuce, Inc. >>> >>> 300 Brickstone Square**** >>> >>> Suite 201**** >>> >>> Andover, MA. 01810 >>> O.978-296-1005 X2015 >>> M.207-956-0262 >>> @mpicher <http://twitter.com/mpicher> >>> www.ezuce.com >>> >>> >>> _______________________________________________ >>> sipx-users mailing list >>> sipx-users@list.sipfoundry.org >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Michael Picher, Director of Technical Services > eZuce, Inc. > > 300 Brickstone Square**** > > Suite 201**** > > Andover, MA. 01810 > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/