[mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 21, 2008 12:31 AM
To: IT Services; Tony Graziano; sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] phones/gateways do not restart via sipxecs
If they are not restarting, I would suggest that either they are on
really old firmware or your
PROTECTED]
Sent: Tuesday, October 21, 2008 12:31 AM
To: IT Services; Tony Graziano; sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] phones/gateways do not restart via sipxecs
If they are not restarting, I would suggest that either they are on
really old firmware or your phones
To: Tony Graziano; IT Services; sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] phones/gateways do not restart via sipxecs
Thanks for the tip.
But even the managed phones (lg Nortel 6812, snom 320) do not restart
after I issue the 'send profiles' commands.
Any thoughts?
tommy
Hi there:
I notice that when I issue a 'Send Profile' command, the phone units
(and gateways) do not receive the 'restart' command from sipxecs. In the
'Job Status' section, it says that the restart command was issued
successfully, however.
Any help is appreciated. Thanks!
tommy
Notice of
I think the gateway is treated somewhat like a phone. It needs to have a
tftp server enabled, as an example, which needs to be the sipx server.
Think of it as a managed phone in that regard.
So you'll need to look at your documentation from the gateway mfr.
IT Services [EMAIL PROTECTED]
@list.sipfoundry.org
Subject: Re: [sipx-users] phones/gateways do not restart via sipxecs
I think the gateway is treated somewhat like a phone. It needs to have a
tftp server enabled, as an example, which needs to be the sipx server.
Think of it as a managed phone in that regard.
So you'll need
