Bob
- Original Message -
From: Simon Van Leeuwen [EMAIL PROTECTED]
To: Arne Ansper [EMAIL PROTECTED]
Cc: Pat McCleave [EMAIL PROTECTED]; RCSE [EMAIL PROTECTED]
Sent: Monday, October 27, 2003 4:59 PM
Subject: Re: [RCSE] Glitches
This is an excellent write-up, mirroring what I
This range/glitch question seems to be one where it is very difficult to get
real world observations to match with theory. There must be some very subtle
real world variables that have a big impact on radio reception. Or there are
some elements of theory that are not well understood yet. I tend to
: [EMAIL PROTECTED]
Sent: Saturday, October 25, 2003 5:30 PM
Subject: Re: [RCSE] Glitches
Bizarre. What manufacture of radio and RX?
Tom Watson wrote:
Well now...the only solution I found to work with my Pike Superior on 72
MHz
was to double the antenna length, running about the last 60% outside
Posssibly, but indirectly. If a given TX's RF power O/P, or a given RX's
sensitivity is relatively lower such that both TX and RX antenna are
relatively in line physically (worst-case transmission/reception), then
blanking occurs.
Dave Seay wrote:
This is all getting to sound like a
Nothing to do with particular frequency, unless there is localized
EMI/RFI.
[EMAIL PROTECTED] wrote:
At 10:59 AM 10/24/03 -0700, WE Johns wrote:
Perhaps it's not the Slimline Rx and the fuse materials but the Tx? Or a
particular Tx? Or a particular Tx battery pack. I'm not convinced
.
Jack Iafret
Keeper of the Nostalgia Rules
- Original Message -
From: Tom Copp [EMAIL PROTECTED]
To: Soaring [EMAIL PROTECTED]
Sent: Thursday, October 23, 2003 1:51 AM
Subject: [RCSE] Glitches.
Hey Guys,
Just to cover my a$$ I am NOT a Hitec hater! I am not a Stylus hater
: Thursday, October 23, 2003 1:51 AM
Subject: [RCSE] Glitches.
Hey Guys,
Just to cover my a$$ I am NOT a Hitec hater! I am not a Stylus hater
either!
Jerry has a problem with the Stylus and Superslim in a Kevlar/carbon
fuse. Almost every F3X sailplane uses this hybrid cloth; they should
,
then I don't envy you for the troubleshooting you're going to have to do.
Just a thought,
Dan
- Original Message -
From: Shape [EMAIL PROTECTED]
To: RCSE [EMAIL PROTECTED]
Sent: Tuesday, September 23, 2003 10:12 PM
Subject: [RCSE] Glitches
I have been flying an Eracer lateley
I have been flying an Eracer lateley that has the woven carbon-kelver fuse
and have been having glitching, droping a flap and was wondering if anyone
has had similar problems and found a cure. My antenna was inside fuse but
has been move to outside bottom. I'm using Hi Tech Super Slim and Stylus.
The electrical properties of KEVLAR (TM) makes it relatively transparent
to RF. It (in itself) would not affect RX sensitivity, unless it is
woven with CF.
Shape wrote:
I have been flying an Eracer lateley that has the woven carbon-kelver fuse
and have been having glitching, droping a flap
I have a problem with my four meter Fiber Glas Flugel Salto. I am running
Hitec 5125 digital servos in the wings and tail feathers, I have a JR 8103
transmitter, a JR549 FM receiver, and my plane range checks fine. At more
than one location it seems like I am being hit with interference. I
Givens:
1. A different Rx has the same problem.
2. Tx works fine with other planes.
3. Site checked with frequency analyzer.
These items are very helpful. I congratulate you on your approach so far.
Given the above, the most likely cause of the problem is due to the radio
gear's installation
12 matches
Mail list logo
