Title: Power Supply repair
Can someone recommend a repair place for a 15A power supply? My charger leads shorted out the PS. The charger lived but I let out the magic smoke from the PS. If I can get if fixed for a reasonable amount Id like to do that instead of having to buy a new one.
gv
Check you local phonebook, or your local university or college
electrical/electronics dept.
George Voss wrote:
Can someone recommend a repair place for a 15A power supply? My charger
leads shorted out the PS. The charger lived but I let out the magic
smoke from the PS. If I can get if
to regulate properly.
Larry Taylor KF6JBG
CD for CVRC Visalia Fall Festival 2004
Oct 2nd 3rd
Club Web is http://www.cvrcsoaring.com
- Original Message -
From: AJ Bhatta [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 14, 2004 8:49 AM
Subject: [RCSE] power supply
Gentlemen:
I
It works fine now.
All I needed was more output power. Now to the net part of my project;
pulleys for a Brengman style cutter.
Thank you all for your input and with helping me in my thinking!
Chris Barker
I have an outdoor sign transformer rated @ .250 KVA and I could hook it
up at either
06, 2002 3:10 PM
Subject: Re: [RCSE] Power supply for foam -What do I need?
I have an outdoor sign transformer rated @ .250 KVA and I could hook it
up at either 12 or 24 volts so if my math is right I could get approx.
20A @12v or 10A @24v.
Which would be better; 12 or 24 volts? Or is there any
.
Therefore, although on a technical basis your suggestion is valid in a real
work use situation the dimmers have actually worked better.
Ed
- Original Message -
From: Martin Cleary [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, April 07, 2002 9:57 AM
Subject: Re: [RCSE] Power supply
? It seems
that the dimmers are at a lower price point.
Martin
- Original Message -
From: Ed Berris [EMAIL PROTECTED]
To: Martin Cleary [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Sunday, April 07, 2002 12:37 PM
Subject: Re: [RCSE] Power supply for foam -What do I need?
I understand
Yes it would be pulling 2.17A @110v input but wouldn't it be putting out
10.41A @ 24v on the output side (neglecting any transformer losses)? :^}
Chris
C. Barker wrote:
I have an outdoor sign transformer rated @ .250 KVA and I could hook it
up at either 12 or 24 volts so if my math is
C. Barker wrote:
Yes it would be pulling 2.17A @110v input but wouldn't it be putting out
10.41A @ 24v on the output side (neglecting any transformer losses)? :^}
Doh. Good point.
I don't suppose you've actually measured the voltage and current coming
out of it? That's the real test.
--
TRANSFORMER. Never that is unless you like tempting fate. (read fatality)
Ed
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 05, 2002 6:38 AM
Subject: [RCSE] Power supply for foam cutter
If you are exceedinly cheap (I qualify) and VERY
careful, you
What does work well in this situation is a variable
voltage dial thingy made to vary the heat of high
wattage soldering irons. You can find them at Radio
Shack or places that sell stained glass supplies. They
plug into a wall socket like a wall wart charger and
the iron or device needing
Is it possible to use a computer power supply as a suply for a charger?
I have tried but I have to have a motherboard connected to it for it to
run. Is it possible to make some modifications to the supply so it can
run without the motherboards?
--
Regards
Erik Wikran
Tromso, Norway
In a message dated 8/18/00 3:35:48 PM Central Daylight Time,
[EMAIL PROTECTED] writes:
Is it possible to use a computer power supply as a suply for a charger?
I have tried but I have to have a motherboard connected to it for it to
run. Is it possible to make some modifications to the supply
voltages.
-Original Message-
From: Erik Wikran [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 18, 2000 1:35 PM
To: Soaring-Digest
Subject: [RCSE] Power supply (PC)
Is it possible to use a computer power supply as a suply for a charger?
I have tried but I have to have a motherboard
14 matches
Mail list logo
