king life (7000 hours, quite long for this type of
> component).
Is 7000 hours really quite long? A device like the Soekris is supposed
to run 24x7 - and at 24 hours a day 7000 hours are less than 10 months.
I would expect a working life of at least 5 years or 45000 hours for any
component used in a comput
eir existing products at about the time Soren stopped
posting. That's now almost 4 years ago.
hp
--
_ | Peter J. Holzer | I think we need two definitions:
|_|_) | WSR - Softwaredevelopment | 1) The problem the *users* want us to solve
| | | und Projektunterstützung | 2) The
he same 0.5A and be about 3W.
Have you tried this? It doesn't seem plausible. I would expect the power
consumption to remain roughly constant independent of input voltage (so
at 6V it would draw about 1A). A constant current would mean that the
regulator just burns any excess voltage.
hp
--
is great, we see 150MB/s, but write performance is
limited to 20MB/s regardless of which SSD or interface type that we
use.
I have 60 GB Intel mSATA SSD in a 6501, and get about 170 MB/s read and
90 MB/s write performance with the default kernel of Debian stable
(3.2).
hp
--
_ | Peter J
input.value , $input / 1000;
say crit.value , $crit / 1000;
}
--
_ | Peter J. Holzer | I think we need two definitions:
|_|_) | WSR - Softwaredevelopment | 1) The problem the *users* want us to solve
move them into a 19 rack I may have to install some
fans.
hp
--
_ | Peter J. Holzer | I think we need two definitions:
|_|_) | WSR - Softwaredevelopment | 1) The problem the *users* want us to solve
| | | und Projektunterstützung | 2) The problem our solution addresses
On 2013-12-02 14:27:40 +0100, Dr. Peter Voigt wrote:
Am Mon, 2 Dec 2013 10:13:09 +0100
schrieb Peter J. Holzer hjp+soek...@wsr.ac.at:
I got some 6501-70's in the 19 case and they run even hotter. For now
I made a little cardboard construction to keep them vertical:
http://www.hjp.at/hw
will autoboot on all the other boxes I have.
hp
--
_ | Peter J. Holzer | I think we need two definitions:
|_|_) | WSR - Softwaredevelopment | 1) The problem the *users* want us to solve
| | | und Projektunterstützung | 2) The problem our solution addresses.
__/ | h
? Or are operating systems
supposed to ignore it and use information from the BIOS (DMI?) instead?
Otherwise I don't really see how the BIOS could prevent exposing that
the CPU is a 64 bit chip.
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR
).
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR | eingeprägt stehen: Ein ewig Rätsel will ich
| | | h...@wsr.ac.at | bleiben, mir und andern.
__/ | http://www.hjp.at/ |-- Wolfram Heinrich in desd
signature.asc
): What do
you really do with your soekris boxes what the Linux license(s) would
prevent you from doing?
I'm really just curious, not trying to escalate the flame war.
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR | eingeprägt
On 2010-06-16 18:19:16 +0200, Alexander wrote:
Your BootDrive setting looks wrong.
Yes.
I think CF would be 0x81,
HDD would be 0x80
No. 0x80 is the first disk, 0x81 the second, etc.
Since his CF card is configured as primary master, that should be 0x80.
hp
--
_ | Peter J
the comBIOS settings from a running system would be nice.
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR | eingeprägt stehen: Ein ewig Rätsel will ich
| | | h...@wsr.ac.at | bleiben, mir und andern.
__/ | http://www.hjp.at
linux system?, but I don't think
I upgraded it.
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR | eingeprägt stehen: Ein ewig Rätsel will ich
| | | h...@wsr.ac.at | bleiben, mir und andern.
__/ | http://www.hjp.at
menu system in minicom
makes it really hard to start the upload before the BIOS gives up.
But with a little practice it's possible ;-).
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR | eingeprägt stehen: Ein ewig Rätsel will ich
their
serial ports together so that each can be used to reconfigure the other.
hp
--
_ | Peter J. Holzer| Auf jedem Computer sollte der Satz Ludwigs II
|_|_) | Sysadmin WSR | eingeprägt stehen: Ein ewig Rätsel will ich
| | | h...@wsr.ac.at | bleiben, mir und andern
to print the boot
menu. I suspect that at that point HW flow control is on and grub (or
the BIOS) waits for a CTS signal.
Does anyone know a way around this problem (I already checked the grub
documentation but didn't find anything).
hp
--
_ | Peter J. Holzer| Am Anfang war der
On 2009-02-28 11:51:11 +0100, Jan Ceuleers wrote:
Peter J. Holzer wrote:
If the serial port is not connected to a PC with a terminal emulator it
hangs at boot time, I think just before grub tries to print the boot
menu. I suspect that at that point HW flow control is on and grub
of the
arp_* entries in /proc/sys/net/ipv4/conf/*) to change this but you
should probably step back and think again about what you want to
achieve.
If not, please describe your network setup.
hp
--
_ | Peter J. Holzer| Am Anfang war der Bug und der
|_|_) | Sysadmin WSR
On 2008-08-24 15:03:13 +0200, Peter J. Holzer wrote:
In a previous thread it was suggested that this might be a problem
with ComBIOS version 1.29 and that upgrading to 1.30 (or newer) might
help.[1]
So I grabbed b4801_133.bin from http://www.soekris.com/downloads.htm,
booted the net4801
that this is happening here.
hp
--
_ | Peter J. Holzer| Am Anfang war der Bug und der
|_|_) | Sysadmin WSR | Verantwortliche sprach:
| | | [EMAIL PROTECTED] | Es werde ein Testcase.
__/ | http://www.hjp.at/ |-- Clemens Zauner in dcii
pgphRg0WtLZZC.pgp
Description: PGP
to boot something
else (as that memtestux.cfg suggests).
hp
--
_ | Peter J. Holzer| Am Anfang war der Bug und der
|_|_) | Sysadmin WSR | Verantwortliche sprach:
| | | [EMAIL PROTECTED] | Es werde ein Testcase.
__/ | http://www.hjp.at/ |-- Clemens Zauner in dcii
,
but the error messages were a bit different (something like unsolicited
nak received (translated from German)).
hp
[1] The OP in this thread got it to work with LILO instead of grub -
that's what I'll try next, but I think upgrading the BIOS should
work, too.
--
_ | Peter J
23 matches
Mail list logo
