Hi,
I have just installed LMs 7.9.2
(logitechmediaserver-7.9.2-1547382380-i386-readynas.bin) on Readynas
ultra 4 with Radiator 4.2.31. Previously LMS 7.9.1 worked fine.
However, it does not want to start. Readynas frontview says it did, but
it is not running (the Setting page does not open, ipen
Hi everyone.
I did try upgrading LMS server from 7.6.3 to 7.9.3 on my prehistoric
Netgear ReadyNas Ultra 2 and it didn't work. LMS didn't start. 7.9.4
beta and 8.0.0 didn't start after the installation either.
I rolled back to 7.7 and it worked fine for me. Any thoughts? Is the
older Netgear st
I did try upgrading LMS server from 7.6.3 to 7.9.3 on my prehistoric
Netgear ReadyNas Ultra 2 and it didn't work. LMS didn't start. 7.9.4
beta and 8.0.0 didn't start after the installation either.
I rolled back to 7.7 and it worked fine for me. Any thoughts? Is the
older Netgear stuff no longer su
Hi Michael.
Thanks for your reply.
I see your point. But tbh I don't really understand why should I change
the hardware (ie Netgear NAS) that is fully working and fits all my
needs pretty well.
It does look like consumerism. ) If there's no way to upgrade to 7.9 or
higher that's ok for me. I'l
f1ash wrote:
> Hi Michael.
>
> Thanks for your reply.
> I see your point. But tbh I don't really understand why should I change
> the hardware (ie Netgear NAS) that is fully working and fits all my
> needs pretty well.
> It does look more like consumerism. ) If there's no way to upgrade to
>
Hi again.
Just tried to reinstall the LMS 8.0.0 and it seemed like it was working
until I rebooted the NAS. So I uninstalled LMS 7.7, installed 8.0.0 and
successfully connected to LMS web interface but all the images were
broken.
Then I rebooted the Netgear NAS and got no connection to web inter
Just tried to reinstall the LMS 8.0.0 and it seemed like it was working
until I rebooted the NAS. So I uninstalled LMS 7.7, installed 8.0.0 and
successfully connected to LMS web interface but all the images were
broken.
Ok, here's what I've found. The change which I could imagine could
potentia
Hi Michael.
> Would you be able and willing to
> replace a bunch of files as the root user on your NAS? (and you'd have
> to do this after every update!)
I do have a will but I am not sure if I have the knowledge. I'll try to
dig into it on the netgear forums.
On the other hand I tried to in
I do have a will but I am not sure if I have the knowledge. I'll try to
dig into it on the netgear forums.
You just gave the perfect reason why to move away from this unit to run LMS:
On the other hand I tried to install several other versions: 7.9.0,
7.9.1 and 7.9.2.
7.9.2 did not work for me
> Save yourself the hassle of trying to
> update the NAS.
It's too late, Mike.. )))
I've installed SSH addon to Netgear and now Upgrading a legacy ReadyNAS
from RAIDiator 4.2.x to 6.2.x.
Hopefully this will fix "IO::Socket::SSL" problem. If not - here's the
solution:
Code:
---
Ludi wrote:
> Hi,
> I have just installed LMs 7.9.2
> (logitechmediaserver-7.9.2-1547382380-i386-readynas.bin) on Readynas
> ultra 4 with Radiator 4.2.31. Previously LMS 7.9.1 worked fine.
>
> However, it does not want to start. Readynas frontview says it did, but
> it is not running (the Setti
UOTE=usbethjim;931540]Not sure about you but I always have to run this
file "lms_1.0.9_all.deb" after installing a LMS update to enable LMS to
run on my ancient Readynas.
Jim
Thanks, I will try.
However 7.9.1 has been running without it.
Ludi
I have tried it but I get message that the update is not valid for this
architecture.
Anyone can help?
Ludi's Profile: http://forums.slimdevices.com/member.php?userid=68696
View this thread: http://forums.slimdevices.com/
updating with console results:
/usr/sbin# squeezeboxserver
dirsFor: Didn't find a match request: [scprefs]
Segmentation fault
Ludi's Profile: http://forums.slimdevices.com/member.php?userid=68696
View this thread: http://f
Have you been inquiring over at the Netgear forums?
Folks over there might be able to help...
I don't think many active members over here use the ReadyNAS anymore.
Jim
All wireless (TM-AC1900) except NAS (ReadyNAS PRO - OS 6.9.1 - 3GB RAM -
3 X 4TB drives - XRAID2 - LMS 7.9.1 )
Squeezebox B
Did you check your server.log file
(/c/.squeezeboxserver/log/server.log)? If that's empty, you could edit
/etc/default/squeezeboxserver, add "--d_startup" to the "SLIMOPTIONS"
and try again. This might give you more information about what is going
on if it fails at startup.
--
Michael
__
mherger wrote:
> Did you check your server.log file
> (/c/.squeezeboxserver/log/server.log)? If that's empty, you could edit
> /etc/default/squeezeboxserver, add "--d_startup" to the "SLIMOPTIONS"
> and try again. This might give you more information about what is going
>
> on if it fails at
Is there anything here that screams at you?
No. "Unfortunately" that startup seems to be working perfectly fine.
dirsFor: Didn't find a match request: [scprefs]
Segmentation fault
Aren't there any timestamps in your log file? Would be interesting to
unerstand whether that segfault hap
You could try updating the Ultra 4 to the latest version of Radiator -
6.9.4 - although you will need to backup all your data before doing so.
Details of how to do it are on the Netgear forum; an upgrade not
officially supported but condoned. The file lms_1.0.9_all.deb is used to
put the ReadyNAS
Heuer wrote:
> You could try updating the Ultra 4 to the latest version of Radiator -
> 6.9.4 - although you will need to backup all your data before doing so.
> Details of how to do it are on the Netgear forum; an upgrade not
> officially supported but condoned. The file lms_1.0.9_all.deb is us
20 matches
Mail list logo