On Apr 20, 2006, at 18:12 , Scott Ullrich wrote:
I have Beta1 running on an embedded device and want to replace this
box with a server running Beta3.
Can I import the configuration from Beta1 and install this on the new
server running Beta3 without problems or do you recommed I start from
On 4/23/06, Anders D. Hansen [EMAIL PROTECTED] wrote:
On Apr 20, 2006, at 18:12 , Scott Ullrich wrote:
I have Beta1 running on an embedded device and want to replace this
box with a server running Beta3.
Can I import the configuration from Beta1 and install this on the new
server
Nice, it worked pretty well - all I had to do after the import was to
remap the interfaces because they were no longer called sis0 and
so on.
When I tested the new firewall the rules seemed to work both
incoming, outgoing and between DMZ zones but the servers could not
initiate traffic to the
Hello,
This is our current situation,
We have 25 workstations connected together by LAN
We have 2 different ISP connection, both static, same DNS servers, but
different gateways
At present we have 2 sets of LAN, one connecting 10 computers to the first
ISP and the other connecting 15
On 4/23/06, Sithi [EMAIL PROTECTED] wrote:
Hello,
This is our current situation,
We have 25 workstations connected together by LAN
We have 2 different ISP connection, both static, same DNS servers, but
different gateways
At present we have 2 sets of LAN, one connecting 10 computers to
I am running pfsense beta2 on vmware server beta and I am trying to use a
single bridged nic to run the firewall.
I have a trunk port coming from the switch, and I have set it up nicely (
monowall in the same configuration runs without problems).
On my w2k server, there are two nics, one is a
this afternoon I ran the full-update to beta3 and everythign seemed
great... (nice graphs, btw) but then i went shopping etc... came back
and had left the system page open and noticed the cpu was pegged at
100% (it's an old machine but normally sits at ~5-25%). and i had
checked before right
