On Jun 29, 2007, at 8:53 AM, <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> wrote:
I'll second this. I tested last week on an 860 just prior to ordering
two more. Everything came up nice and clean. While I can't speak to
what
it will do under load, it does at least install and not fall over on
re [mailto:[EMAIL PROTECTED]
Sent: Friday, June 29, 2007 4:09 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] Pfsense 1.01 - Dell PowerEdge 860
Hi,
To give an update on this.
I've successfully installed pfsense 1.2b1 with CARP on Dell PE860's. The
trick was to setup the machines
Hi,
To give an update on this.
I've successfully installed pfsense 1.2b1 with CARP on Dell PE860's. The
trick was to setup the machines from scratch and not use an older config.
These machines have been running wonderfully for the last few months now.
Hope this helps someone, especially that
That was exactly it. I enabled a few settings and then disabled CARP and
then a few seconds later re-enabled it.
Chris Buechler wrote:
Garith Dugmore wrote:
An update:
I've now manually configured pfsense from scratch, except for the
firewall rule section and NAT which I restored from backup
2223 Dutch Gold Dr.
Lancaster, PA 17601
Tel. 717-481-8660 Ext. 207
Fax 717-481-8661
Cel. 717-917-8812
From: Garith
Dugmore [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 03, 2007 6:31 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] Pfsense 1.01 - Dell PowerEdge
860
Garith Dugmore wrote:
An update:
I've now manually configured pfsense from scratch, except for the
firewall rule section and NAT which I restored from backups. This time
I also got a kernel panic when fiddling with the CARP settings.
So to conclude I get a kernel panic when changing CARP set
481-8661
Cel. 717-917-8812
_
From: Garith Dugmore [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 03, 2007 6:31 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] Pfsense 1.01 - Dell PowerEdge 860
An update:
I've now manually configured pfsense from scratch, except for the firewa
de maio de 2007 12:58
To: support@pfsense.com
Subject: Re: [pfSense Support] Pfsense 1.01 - Dell PowerEdge 860
D.Pageau wrote:
On 5/2/2007 9:35 AM, Pedro Paulo Oliveira Jr wrote:
PfSense and Dell are a problem in our experience.
Work jus
even sound possible?
Pedro Paulo Oliveira Jr wrote:
Chris is right. Sata was a problem for the old kernel.
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]]
Sent: quarta-feira, 2 de maio de 2007 12:58
To: support@pfsense.com
Subject: Re: [pfSense Support] Pfsense 1.01
Chris is right. Sata was a problem for the old kernel.
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: quarta-feira, 2 de maio de 2007 12:58
To: support@pfsense.com
Subject: Re: [pfSense Support] Pfsense 1.01 - Dell PowerEdge 860
D.Pageau wrote:
> On 5/2/200
D.Pageau wrote:
On 5/2/2007 9:35 AM, Pedro Paulo Oliveira Jr wrote:
PfSense and Dell are a problem in our experience.
Work just fine here on Dell pe850
The newer Dell models with SATA and/or SAS seem to have issues with
FreeBSD. The older Dells, like the PE 850, 1850, 2850, 2650, 2550, etc
On 5/2/2007 9:35 AM, Pedro Paulo Oliveira Jr wrote:
PfSense and Dell are a problem in our experience.
Work just fine here on Dell pe850
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROT
e.com
Subject: [pfSense Support] Pfsense 1.01 - Dell PowerEdge 860
Hello Pfsense Support,
I have 2 Dell Poweredge 860's that seemed to have been reported to work by a
fellow pfsense user (
http://www.mail-archive.com/support@pfsense.com/msg08534.html ).
I've gone through a normal s
13 matches
Mail list logo
