https://therion.speleo.sk/wiki/metapost?s[]=vertical&s[]=scalebar
almost at the bottom
-Ursprüngliche Nachricht-
Von: Therion [mailto:therion-boun...@speleo.sk] Im Auftrag von Benedikt
Hallinger
Gesendet: Donnerstag, 26. November 2020 14:12
An: List for Therion users
Cc: Martin Sluka
Bet
Thank you Benedikt!
Von: Therion [mailto:therion-boun...@speleo.sk] Im Auftrag von Benedikt
Hallinger
Gesendet: Sonntag, 6. September 2020 14:21
An: List for Therion users
Betreff: Re: [Therion] Command extend
Yes, you are right.
Am 06.09.2020 um 12:58 schrieb Markus Boldt :
Hi
Hi all,
the command "extend" comes in the loop centerline / endcenterline in the
TH-File - right?
Best
Markus
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
Hi,
hopefully someone can give me an idea, what I have to do in therion, when I
have a point station, which should not go to the calculated length of the
cave. But this point station should shown in the
In my sample there is a doline in the near of my cave entrance with a point
station.
Thanks!
Hi Martin,
in Ebensee I have asked you, if this part is buyable. Is it? And when where.
Best regards
Markus
Von: Therion [mailto:therion-boun...@speleo.sk] Im Auftrag von Martin Sluka
via Therion
Gesendet: Freitag, 6. September 2019 10:00
An: List for Therion users
Cc: Martin Sluka
Betreff:
Dear Phil, in fact it is a good Idea and a great work. But...
But there are some evident problems, if I would give you "my" data from "our"
caves - for example. There are often at some projects a lot of surveyors over
the years. So I have to ask them all. In germany the data are archieved until
. because it was a theme once before. And I know there is a way.
How was the way to get a top-File for pockettopo from a th-file and a
th2-file from Therion?
Greetings
Markus
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listi
Hi Tarquin,
thanks for that very fast answer.
And it looks like it will help.
My Idea is to get "forgotten LRUD-Data by measuring in the cave" that I can do
they into the Data-list of the scraps in Therion. I hope to get a better
Loch-Modell with this additional data.
Markus
-Ursprünglic
Hello,
is there a possibility to calculate LRUD-Data from splays? It would be nice,
if you have not measured LRUD at the point in the cave, but only splays for
drawing.
I hope you understand my terrible English J.
Greetings
Markus
___
Therion maili
Hi Wookey,
I guess, this "problem" is better lifted to the topodroid-list or rather
directly to Marco. Because to change the resolution of lines is better made
before exporting to therion. Of course it`s my opinion.
Greetings
Markus
-Ursprüngliche Nachricht-
Von: Therion [mailto:therion
s the PLUS and MINUS keys for 2 seconds to allow
editing.
Then press the PLUS or MINUS key to change the value.
Changing the offset is useful for self-made endpieces or other cases where a
non-standard
reference is used.
M.
28. 8. 2018 v 14:48, Markus Boldt via Therion :
Hi,
Ev
Hi,
Evaristo and Martin have showed extentions for the Distox. It is a very good
Idea. But what is with the so extended length of the distance? Must I change
all measurings by hand in the list of Pockettopo or Topodroid or is there a
possibility to "say" that to the distox by default?
Thanks fo
Hi Adam, "normally" you have coordinates of your radio location point at the
surface from GPS. You know, I do so. What a kind of coordinates you have? Give
them simply a thought depth for example.
Best regards to Poland and greetings to Agnieska :-).
Markus
-Ursprüngliche Nachricht-
Von
Hi,
is there a possibility to get a topodroid-file from therion?
Markus
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
ves or different levels in the cave - with hyperlinks to
navigate between different levels. Only pdf format is supported. Inserted
graphic images are NOT supported."
Also https://therion.speleo.sk/wiki/templates#atlas_specific which contains
some useful atlas paper size layouts.
Bruce
Hello,
how is it possible to "say" Therion to make a PDF-File with for example a
Size of DIN A4 (21 x 29,7 cm)?
I have tried
Page-setup 21 29.7 20 29 0.1 0.1 cm
it doesn`t work
I have tried
Size 21 29.7 cm
It doesn`t, too
The command is ignored.
Greetings
Markus
745320641083,0.00
9.74556506923348,48.43740786691496,0.00
#ThMapStyle
<PolyStyle> <color>bfcc</color> </PolyStyle>
9.74479382219246,48.43768823902057,0.00
9.74488546711236,48.43766713250446,0.00
9.74486108946851,48.4376341
line object is your string without :0. So the :0
must be at the end of that object.
Martin S.
Odesláno z iPhonu
17. 6. 2018 v 0:37, Markus Boldt via Therion :
Hi,
what means the error:
line mark not a keyword -- scrap-21-Wand-L-ob:0@Steeb-GS-01
when I use the join-command?
Regards
Hi,
what means the error:
line mark not a keyword -- scrap-21-Wand-L-ob:0@Steeb-GS-01
when I use the join-command?
Regards
Markus
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
data
flags not duplicate
Martin S.
11. 6. 2018 v 14:12, Markus Boldt via Therion :
Hello,
if I have a leg where I need to separate shots (from the one point I don`t
reach a continuative part) and I want to exclude the one from the
calculation of the cave-length
Hello,
if I have a leg where I need to separate shots (from the one point I don`t
reach a continuative part) and I want to exclude the one from the
calculation of the cave-length. What have I to write in my .th-File in the
data-lines to exclude it from the calculation of the length but not from t
Hi,
Rodrigo,
if I do a look on your file with an simple editor (Windows), then it looks very
other as all my own th2-files. In you file is written all in 3 lines.
And I think that is the problem in generally. Your file is not really readable
for Therion. I`am using Therion 5.4.1 on Windows
config file
from utf to iso-... (can‘t remember the correct number) format.
Cheers,
Torsten
Am 30.12.2017 um 14:43 schrieb Markus Boldt via Therion :
Hi Torsten,
If I do so as you and Henry describe I get the error: unknown option -- text de
"Geländer" "Transportbahn". B
] Line Hauling Track
Hi Markus
Changing text in legend should work with (in your config file):
Text en „line handrail“ „text you want“
„En“ is depending on your choice of language. May be you are using „de“!?
Cheers,
Torsten
Am 30.12.2017 um 12:59 schrieb Markus Boldt via Therion :
Hi Ma
Dezember 2017 20:49
An: List for Therion users
Cc: Martin Sluka
Betreff: Re: [Therion] Line Hauling Track
29. 12. 2017 v 19:55, Markus Boldt via Therion :
hauling Track
SKBB symbol set:
___
Therion mailing list
Therion@speleo.sk
https
I would like to have a line "hauling Track" in Therion J. Is there a
possibility?
Regards
Markus
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
Yes, I have found the possibility (symbol-color area blocks [xx xx xx]), but
it affected only to the blocks. What I want to have is a completely other
colored area with blocks in it. So in this area must be a change to the
background-color, I guess. But how?
Regards
Markus
Hi,
is there a possibility to give an "area blocks" another color as the
forground-colour? Like it is possible for area water with metapost.
Regards
Markus
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
Hi Ben,
is it right - you give the lenght in meters? Then the distance from point to
point is very long? A huge cave? There are Kilometers by some mesurements?
Regards
Markus
Von: Therion [mailto:therion-boun...@speleo.sk] Im Auftrag von Ben Cooper
via Therion
Gesendet: Sonntag, 22. Okt
I think so. Otherwise all lenghten are added to the centerline.
Or I am wrong?
Markus
Von: Therion [mailto:therion-boun...@speleo.sk] Im Auftrag von Martin Sluka
via Therion
Gesendet: Donnerstag, 5. Oktober 2017 09:59
An: List for Therion users
Cc: Martin Sluka
Betreff: Re: [Therion] How to
-boun...@speleo.sk] Im Auftrag von Dave Clucas
via Therion
Gesendet: Donnerstag, 14. September 2017 09:26
An: therion@speleo.sk
Cc: Dave Clucas
Betreff: Re: [Therion] Area "filled" (Markus Boldt)
Markus, instead of going to the trouble of creating complex code to include
this fill symbol i
: Re: [Therion] Area "filled"
Please, what it means "fill in part“?
They are user defined symbols.
Martin
13. 9. 2017 v 14:35, Markus Boldt via Therion :
Yes Martin, that`s it. But how get I now the box “fill in Part” with this nice
color in the Legend and how do I t
. September 2017 09:43
An: List for Therion users
Cc: Martin Sluka
Betreff: Re: [Therion] Area "filled"
Check this link, it is exactly what you want, I think:
http://schv.sk/wp-content/uploads/2016/07/1_o3_dlayout_en.pdf
m.s.
13. 9. 2017 v 9:25, Markus Boldt via Therion :
H
Hello,
is there a possibility in Therion to get a signature for an area "filled",
"refilled" or something similar? Background is, we have dug in a cave and by
digging we have filled a small chamber.
Greatings
Markus
___
Therion mailing list
Th
Hi Phil,
I think, you must specify -colour map-fg [0 70 0] (for scraps and "map-bg" for
the "paper"). As it is done in the loop Layout - endlayout of the config-file.
But I`am not sure
Regards
Markus
-Ursprüngliche Nachricht-
Von: Therion [mailto:therion-boun...@speleo.sk] Im Auftrag
Hi Torsten,
only a question...
Do you have a fixed point for the entrance with a "depth" to your series of
scraps?
May be there is the fault.
Regards
Markus
-Ursprüngliche Nachricht-
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Torsten Schnit
[mailto:drfootleg at gmail.com]
Gesendet: Sonntag, 21. Februar 2016 23:37
An: List for Therion users; Markus Boldt
Betreff: Re: [Therion] What means that or where is the fault?
Or possibly you have incompatible versions of Therion and Survex installed?
Make sure you have a recent Survex version for
After compiling I get the error âwarning -- can't open cavern log file for
inputâ. Therion works well, but there is this error.
What is wrong?
And after doing the âVladimir-Chancesâ into the INI and TCL file the Colors
are working. But drawing an area is not further working? I can not
Hi Vladimir,
I say the same as Bruce. Perhaps I already more a user as Bruce and so you will
get no answers from me too. Excuse!
But I want to know:
If I want to use this advantage must I only copy the changes in die INI.file?
But in witch INI-File?
Please do a look to the attachment. The
Hi,
it is only a thinking..
If you began to servey a cave, you take your first LRUD-Data at the first
point. So it must be in a way that Therion estimate the LRUD-Data at the
point where they are taken from.
If not, then the first (e.g. A1 to A2 would only exist as a traverse line
without defi
Hi Michael,
at the PDA try/use "Connection automatically". At my PDA it works good. It
works, even if I shut off the PDA. After shut on and start PocketTopo again the
connection will come automatically. (Asus 696)
regards
Markus
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo
A Plugin for Therion?
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Martin Sluka
Gesendet: Sonntag, 22. November 2015 14:33
An: List pro Äesky a slovensky mluvÃcà uživatele programu Therion
Cc: List for Therion users
Betreff: [Therion] Unreal
Way
Hi,
I`am using an old Asus 696 PDA with Wmobil 6 and of course pockettopo. It works
very well. Once I have lost the original pencil in the cave and I couldn`t find
it anymore. It was not so easy, but the surveying on that day was made with my
fingernail âº. A replacement for the original was fo
Hi Martin,
If it is possible, I would like to have the thconfig file witch you have used
for that well looking plan. Iâ am sure, I will learn a lot from that to make
better plans with Therion.
Iâ am more a learner by doing, so it would help âº.
Regards
Markus
Von: therion-bounces at speleo.s
I have printed it on a normal paper-sheet and then laminated with a "normal"
Laminator by my work. This "thing" has worked for some years. But we have
not so much surveyings in our Region. Once I have to make it new. But no
problem - it is so simple to make it. BTW - many thanks for that utily!
No
Hi all,
if you use a theodolite, you will have also an vertikal angle. So this is to
calculate too. I would use Excel for the calculation - or not? To calculate the
Data you have to write them in a table anyway.
Greetings
Markus
-Ursprüngliche Nachricht-
Von: therion-bounces at sp
Hi Michael, (in english so all can understand it, but not be angry about the
poorness :-))
I know your project of "Fuchslabyrinth" and so I may say: for the future it
will be the best Idea to draw the cave or the old bitmaps new. I know, it is
very much work. But after you will have no Problems
Hi,
I have a question related the possibility to
change font sizes as given in Therion wiki with a
metapost-code.
What have I done?
In config-file I have written:
code metapost
def fonts_setup (expr t,s,m,l,h) =
write "\def\thstationname{\size[4]}" to
"mptexpre.tex";
write EOF to "mptexpre.
. 2015 v 10:44, Markus Boldt :
Yes, I have. With a signature from Therion AND with the Altitude in
fix-command. Why you are asking? Only for Info, or is there an important
Information.
Hi,
if there isnât entrance definition Therion calculates altitude difference
from bottom most or from
Yes, I have. With a signature from Therion AND with the Altitude in
fix-command. Why you are asking? Only for Info, or is there an important
Information.
Greetings
Markus
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag von Martin Sluka (External)
Gesendet: Fre
ce
_
From: therion-bounces at speleo.sk [mailto:therion-boun...@speleo.sk] On Behalf
Of Markus Boldt
Sent: Thursday, 5 March 2015 9:31 a.m.
To: therion at speleo.sk
Subject: [Therion] german expression for depth-legend
Hello,
if I let make a legend for the depth by color (colour map-f
Hello,
if I let make a legend for the depth by color (colour map-fg altitude) the
title of that legend is ÂHöhe des TitelfeldesÂ. That is nonsense for me. Is
it possible to change that? May be with some TEX or METAPOST?
In the wiki I have found how it is possible to make changes by myself.
Hi to all,
I have following problem with a very small cave and I doen`t find the
mistake.
The cave has only one shot. The map as plan works ok. But the extended
presentation doesn`t works.
The shot has a plus clino, but Therion does it to minus AND the whole cave
on top. What is wrong?
As
der
>specification.
2. Export final PDF
m.
11. 1. 2015 v 14:02, Markus Boldt :
Hi,
How is it possible to get a PDF with plans in plan and extended representation
on one sheet.
I have tried it with:
map gs -title "Farrenwiesschacht" -projection plan
scrap1
endmap
m
.sk [mailto:therion-bounces at speleo.sk] En
nombre de Markus Boldt
Enviado el: domingo, 11 de enero de 2015 14:03
Para: 'List for Therion users'
Asunto: [Therion] Excuse that simple question
Hi,
How is it possible to get a PDF with plans in plan and extended representation
on one s
Hi,
How is it possible to get a PDF with plans in plan and extended representation
on one sheet.
I have tried it with:
map gs -title "Farrenwiesschacht" -projection plan
scrap1
endmap
map ext -title "Farrenwiesschacht" -projection
scrap7
endmap
But I get only scrap1 in my PDF.
Many thanks to all for the answers!
I work with Asus A696. It works without any problems since 4 years.
I must say, I havn`t not found âmanyâ Dell Axim or HPs on Ebay. Yes, there
are some more for over 100â¬, but that price in inacceptable for that old
device. 4 others are at an acceptab
Hi all,
slowly the time goes to end, there we can buy cheap "old" PDA with
Winmobile. Pockettopo works only on Win platform and small cheap devices
with Windows as OS are seldom. And our devices in use are growing older.
What do you all use? What alternatives are possible. I know about some so
cal
Yes! Thank you, Footleg
Markus
-Ursprüngliche Nachricht-
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Henry Bennett
Gesendet: Donnerstag, 25. September 2014 17:42
An: 'List for Therion users'
Betreff: Re: [Therion] Sumatra PDF
Paul,
Not seen t
non, il n'y a qu'une seule liste en anglais - ou?
No, there is « only » a list in english â or ?
Regards
Markus
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag von Yann Gardère
Gesendet: Sonntag, 24. August 2014 19:48
An: therion at speleo.sk
Betre
Hi Martin,
that`s good, but...
...what a printer do you use? My printer (Konica Minolta) brings it in the
upper left corner so that all is snipped away before the N from Func.
Please can you make the PDF once more with more Border at the upper an left
side.
Thank you
Regards
Markus Boldt
In this context I have often thought, why there is no possibility to get a file
in Excel-Format. I think for the most cavers respectively serveyors it is more
easy to work with Excelâ¦â¦
But I`am no programmerâ¦..
Markus
Von: therion-bounces at speleo.sk [mailto:therion-bounces at spel
I have no Mac, but this error comes also on Windows7, if you have shut on
the preview in file-manager and you have only choose the data-file for
therion.
Greetings
Markus
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Dave Clucas
Gesendet: Mittwoch,
ermanently drown the Recon in a swimming passage though.
Bruce
-Original Message-
From: therion-bounces at speleo.sk [mailto:therion-boun...@speleo.sk] On Behalf
Of Markus Boldt
Sent: Saturday, 12 April 2014 2:46 a.m.
To: 'List for Therion users'
Subject: [Therion] PDA
Hello,
Andrew Atkinson
Gesendet: Freitag, 11. April 2014 17:17
An: Therion
Betreff: Re: [Therion] PDA
Have you put the .net framework on the ce version? I believe 6 comes with it
so you do not need to it for that one.
Andrew
On 11 Apr 2014 15:51, "Markus Boldt" wrote:
Hello,
has anyone a l
Hello,
has anyone a list of PDA mobiles, which are able to work PocketTopo? I have an
ASUS MyPal 696 with Win mobile 6.0. On this device PocketTopo is working. On
another device HP AXIM with Win CE 3.0 it is not working.
Thank you
Regards
Markus
Hi,
what I want to ask is:
since I use Win7, every time I start Therion first there comes a message
that WISH84.EXE should start. And I see, I must allow it, otherwise therion
don`t starts. What is that? And is it possible, if it must be, that there is
an approach that therion starts without th
Hello,
the problem happens, if I use a stick as medium for fetching the Pockettopo
file and then the File from Therion to the stick will not be written.
Let I fetch the TXT-File from a drive on the computer it works as before
with Win XP.
Another problem is now fixed to. That Therion works pr
Suddenly I have a Problem with getting drawings from Pockettopo to Therion.
If I have made a Therion-Export-File on my PDA and I want to load it in
Therion-Map-Editor I get the Error like below. If I say OK the XVI-File will
produced anyway!
Then I have tried to import that File to the Editor a
Every time i want to print something in a "shop", I ask my printer witch
Printer-profile he will use. May be "Forga" for example. Then I save my File
from Adobe Indesign or Acrobat with this profile. And I will have no
problems with the colors - normaly...
Merry Christmas and a happy new year to a
Martin,
in the moment I see, that under the light grey ist the light yellow. That is
not what I want to have. And therefore I think to define a transparency is
not really possible - or?
Markus
-Ursprüngliche Nachricht-
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.
Martin,
it works! Many Thanks!!
Is there an additionally possibility to make this definition so that the
area will be a bit transparent?
Markus
-Ursprüngliche Nachricht-
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Sluka Martin
Gesendet: Sonnta
Is it possible to define color-map fg only for one scrap in a Project of
about 50 scraps in several surveys?
I have an "all-thconfig" file for this Project and there I have defined a
light yellow for the cave. And in the scrap which I want to have in very
light grey I have defined this very light
I say many thanks to all who has answered my question. Next weeks I will try
some of your samples to find out which may be the best for me.
Markus
utput is aware.
Beyond me I am afraid, but I have a number of projects where this would be a
very desirable addition to Therion.
Bruce
-Original Message-
From: therion-bounces at speleo.sk [mailto:therion-boun...@speleo.sk] On Behalf
Of Markus Boldt
Sent: Friday, 19 October 2012 7:23 a.
Dear all,
I want to make a plan, which includes three caves. But how is it possible
that the cavelenght is only added from one Cave-centerline.
For example:
Cave1 = 100m
Cave2 = 2000m
Cave3 = 50m
The best would be if I will get following Header:
Name of cave2
Scalebar and northarrow
Name
No :-)
I think, it will be the best you give us an sample file.
Markus
_
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von chris and ita
Gesendet: Freitag, 17. Februar 2012 16:18
An: therion at speleo.sk
Betreff: *** GMX Spamverdacht *** [Theri
*** Re: [Therion] KML-File
Sure. You just need to open it in a text editor, and delete all the white
space characters from the file (apart from in the title). Then the KML file
will work in GoogleEarth.
Footleg
On 15 February 2012 13:35, Markus Boldt wrote:
Hi,
once, I think Footleg has had a
Hi,
once, I think Footleg has had a solution to change "old" KML-Files to the
new Version needed for Google Earth. Excuse me, I have cancelled his answer.
Can you send it please once more to the list.
Regards
Markus
-- next part --
An HTML attachment was scrubbed...
U
Ups- Sorry!
Markus
_
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag von Markus Boldt
Gesendet: Freitag, 20. Januar 2012 15:00
An: 'List for Therion users'
Betreff: [Therion] Stahlträger
Hallo Thomas,
den genauen Preis für d
Hallo Thomas,
den genauen Preis für den Träger bekommst du noch. Huber meint, er würde auf
keinen Fall zwei Träger einbauen sondern immer nur den GroÃen.
Pro Kg kostet es etwa 1,20â¬/Kg. Der groÃe Träger wiegt pro Meter 44Kg. D.h.
insgesamt ca. 163 Kg. Also gar nicht sooo schwer.
Da
t of .th2 file it is
generated by therion.
Odesláno z iPhonu
13. 1. 2012 v 3:37, Markus Boldt :
> But how has you got the station Points and the Centerline to Inkscape? I
have tried it in this way: I have generated a th2-File only with Station
Points, walls. The "picture" in Ink
But how has you got the station Points and the Centerline to Inkscape? I have
tried it in this way: I have generated a th2-File only with Station Points,
walls. The "picture" in Inkscape was ok, but without station Points and
centerline. May it be possible to send your th2-file from the scrap in
Windows (5.1.2600.2)
Grafiktreiber
Intel (6.00014.00010.04609)
Max. TexturgröÃe
2048x2048
verfügbarer Videospeicher
96 MB
Server
kh.google.com
_
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Markus Boldt
Gesendet: Sonntag, 20
It`s the same by my kml-Files ever created. Could it (there must) be a new
release of Google-Earth?
Markus
_
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Footleg
Gesendet: Sonntag, 20. November 2011 22:03
An: List for Therion users
Betreff:
Thank You, Martin, for the fast answer.
So, it seems me, that it should be the bettest way to convert the PDF to a
high resolution jpeg. Because in this case I use layers. And additionally
there is a problem with the fonts provided by Indesign. Because I cannot see
(in the PDF-File opened by an Ed
.
Clearly, it is no problem to convert it with a tool, but it would be easier
to get it directly from Therion.
Regards
Markus Boldt
-- next part --
An HTML attachment was scrubbed...
URL:
<http://mailman.speleo.sk/pipermail/therion/attachments/20110522/5a505
Many thanks, Bruce and Marco, for that very fast answer!
It works, but if I plot the elevation plan with annother orientation as 0DEG
than I missed the Walls?
Markus
_
Von: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] Im
Auftrag
von Bruce
Gesendet: Mittwoch, 2
Hi,
probably it is a very simple question. But I do not get it out.
How is it possible to get a plan projection AND a elevation projection
(180°) on one map.
I have a simple cave with 4 very small scraps with plan projection and one
scrap with elevation projection.
I have found no example
Hi Footleg,
could it be helpfull for you if you do a look to the parameters to convert
from WGS84 to European 1979? I havn`t found no formula to convert it
automatically. In hope there is someone on the list who has more
Informations for calculate it.
Umrechnungsparameter aus WGS84
dX [m
set.
However, this is/was not always the case, the error of scraps
overlapping themselves was a good indication of other places it went
wrong, but these are often very difficult to solve, I still have many in
my data sets.
Andrew
On 06/02/11 10:52, Markus Boldt wrote:
> Hi,
> I have a cav
Hi,
I have a cave with a length from about 400m. It is shared into 8 separated
*.th and *.th2 Files.
All worked well, if I want to get a PDF-File with projection plan.
But in the kml-File (made with: export map -fmt kml -projection plan -layout
standard -output BTH-11-02-06_GS.kml) there are mis
92 matches
Mail list logo