Anyone have a different/later PICTIC II parts list (or from an alternate
supplier)?
Thanks,
Dave
On Fri, Aug 6, 2010 at 1:02 PM, Bob Camp li...@rtty.us wrote:
Hi
I believe the project at:
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8736DCEE10
is up to date in (no
- From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Friday, August 13, 2010 5:34 PM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
Heathkid
Hi
Shortages... what shortages :)..?
The two
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, August 14, 2010 7:05:35 AM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
Heathkid
Hi
This isn't my design
Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Heathkid
Sent: Friday, August 13, 2010 1:48 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
Heathkid
Hello
/2010
John K1AE
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Heathkid
Sent: Friday, August 13, 2010 1:48 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
Hi
Shortages... what shortages :)..?
The two offending resistors have been bumped to 1% standard values from 5%
standard. Functionally there should be no difference at all.
Sorry for the delay in getting it up dated.
Bob
On Aug 13, 2010, at 1:47 AM, Heathkid wrote:
Hello everyone.
/output connectors be? Thanks again!
73 Brice KA8MAV
- Original Message -
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Friday, August 13, 2010 5:34 PM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
According to www.octopart.com, Arrow Electronics has 1300 pieces of the
74AC175PC 16 pin PDIP in stock.
Dan Schultz N8FGV
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
Of Didier Juges
Sent: Friday, August 06, 2010 8:36 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
project?
I have not seen an answer to that question (for people in the US) ?
I am waiting for the PWB, which I believe
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
project?
I have not seen an answer to that question (for people in the US) ?
I am waiting for the PWB, which I believe I paid for, and I am planning
to
buy or make
...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Didier Juges
Sent: Friday, August 06, 2010 8:36 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
project?
I have not seen an answer to that question
I have not seen an answer to that question (for people in the US) ?
I am waiting for the PWB, which I believe I paid for, and I am planning to
buy or make (have not looked into that yet) a PIC programmer, since it looks
like I may get some mileage out of that anyhow.
No rush, but there is no
06, 2010 8:36 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?
I have not seen an answer to that question (for people in the US) ?
I am waiting for the PWB, which I believe I paid for, and I am planning
Of Didier Juges
Sent: Friday, August 06, 2010 8:36 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?
I have not seen an answer to that question (for people in the US) ?
I am waiting for the PWB, which I
'
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?
I have not seen an answer to that question (for people in the US) ?
I am waiting for the PWB, which I believe I paid for, and I am planning to
buy or make (have not looked into that yet) a PIC programmer, since it looks
@febo.com
Sent: Wednesday, August 04, 2010 1:16 PM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
project?
I've ordered the mouser project and skipped the parts that won't ship
until 2011. So we're in the same boat.
Leigh/Wa5ZNU
. Klotz, Jr. WA5ZNU
le...@wa5znu.org
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Wednesday, August 04, 2010 1:16 PM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
project?
I've ordered the mouser project and skipped the parts that won't
I've ordered the mouser project and skipped the parts that won't ship
until 2011. So we're in the same boat.
Leigh/Wa5ZNU
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
. WA5ZNU le...@wa5znu.org
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Wednesday, August 04, 2010 1:16 PM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?
I've ordered the mouser project and skipped the parts that won't ship
until
I believe there is at least more than one Mouser project covering the
PICTIC II, can someone point me to the best version with pots that are
correctly orientated, etc, please? I'm not worried about the 74AC175PC
as I have a couple of them in my grubby little hands so I would delete
them from my
Hi
The one I put up didn't get updated for the op amps going out of stock.
Bob
On Aug 3, 2010, at 7:42 PM, Steve Rooke wrote:
I believe there is at least more than one Mouser project covering the
PICTIC II, can someone point me to the best version with pots that are
correctly orientated,
21 matches
Mail list logo
