Re: [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig

On Tue, 2019-03-19 at 17:29 +0100, Simon Goldschmidt wrote: > Am 19.03.2019 um 17:19 schrieb Chee, Tien Fong: > > > > On Fri, 2019-03-15 at 21:13 +0100, Simon Goldschmidt wrote: > > > > > > Instead of fixing the SPL stack to 64 KiB in the board config > > > header > > > via > > >

Re: [U-Boot] [PATCH v3 3/3] poplar: enable Ethernet driver support

On Tue, Mar 19, 2019 at 06:42:17PM +, Joe Hershberger wrote: > On Sun, Mar 10, 2019 at 3:53 AM Shawn Guo wrote: > > > > The 'phy' reset of gmac device in kernel device tree is not generic > > enough for u-boot to use, so we need to overwrite the 'resets' property > > as needed. With this

Re: [U-Boot] [PATCH v3 1/3] reset: add reset driver for HiSilicon platform

Hi Joe, Thanks for the comments. On Tue, Mar 19, 2019 at 06:42:06PM +, Joe Hershberger wrote: > Hi Shawn, > > On Sun, Mar 10, 2019 at 3:53 AM Shawn Guo wrote: > > > > It adds a Driver Model compatible reset driver for HiSlicon platform. > > The driver implements a custom .of_xlate

Re: [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver

On Tue, Mar 19, 2019 at 5:47 PM Marek Vasut wrote: > > On 3/19/19 10:46 AM, Ley Foon Tan wrote: > > On Tue, Mar 19, 2019 at 5:39 PM Marek Vasut wrote: > >> > >> On 3/19/19 4:26 AM, Ley Foon Tan wrote: > >>> On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: > > On 3/12/19 9:31 AM, Ley

Re: [U-Boot] [PATCH 1/1] efi_loader: correct parameter size in efi_allocate_pool

On Tue, Mar 19, 2019 at 07:59:37AM +0100, Heinrich Schuchardt wrote: > On 3/19/19 1:19 AM, Takahiro Akashi wrote: > > On Mon, Mar 18, 2019 at 08:32:23PM +0100, Heinrich Schuchardt wrote: > >> efi_allocate_pages() expects a (uint64_t *) pointer to pass the address of > >> the assigned memory. If we

[U-Boot] [PATCH v4 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior

See UEFI v2.7, section 3.1.2 for details of the specification. With efidebug command, you can run any EFI boot option as follows: => efi boot add 1 SHELL ... => efi boot add 2 HELLO ... => efi boot order 1 2 => efi bootmgr (starting SHELL ...) => efi boot next 2 => efi bootmgr

[U-Boot] [PATCH v4 0/1] efi_loader: support BootNext and BootCurrent

This patch was originally posted as a single one, but then was merged in my "run -e." Now I would like to post it on its own. With this patch, EFI Boot Manager will handles BootNext and BootCurrent variable as UEFI specification describes. Changes in v4 (Mar 20, 2019) * strictly check the size

[U-Boot] [PATCH 2/2] fastboot: getvar_partition_type: Return 'raw' when FS-unaware

Only a handful of Android/fastboot partitions (e.g. /system, /vendor, /userdata) have filesystem: host $> fastboot getvar partition-type:userdata partition-type:userdata: ext4 Finished. Total time: 0.013s Most of them (/misc, /pstore, /vbmeta, /dtb{o}, /boot, etc) don't. And for the latter

[U-Boot] [PATCH 1/2] fastboot: getvar_partition_{type, size}: Sanitize arguments

Correct usage of "fastboot getvar_partition_{type,size}" is: host $> fastboot getvar partition-size:misc partition-size:misc: 0x0400 Finished. Total time: 0.214s When the partition name is omitted, current behavior is: host $> fastboot getvar partition-size getvar:partition-size

Re: [U-Boot] Pull request: u-boot-net.git master

On Tue, Mar 12, 2019 at 01:15:46PM -0500, Joe Hershberger wrote: > Hi Tom, > > These patches passed the CI build here: > https://travis-ci.org/jhershbe/u-boot/builds/501807294 > > The following changes since commit 2e8092d94f40a5692baf3ec768ce3216a7bf032a: > > Merge branch 'master' of

Re: [U-Boot] [PULL] u-boot-socfpga/master

On Mon, Mar 18, 2019 at 04:08:48AM +0100, Marek Vasut wrote: > The following changes since commit 9659eb46af6249b6e4b3712e60a1eb2e87fc48a1: > > Merge branch 'master' of git://git.denx.de/u-boot-samsung (2019-03-14 > 11:37:11 -0400) > > are available in the Git repository at: > >

Re: [U-Boot] [PULL] u-boot-usb/master

On Mon, Mar 18, 2019 at 04:08:18AM +0100, Marek Vasut wrote: > The following changes since commit 9659eb46af6249b6e4b3712e60a1eb2e87fc48a1: > > Merge branch 'master' of git://git.denx.de/u-boot-samsung (2019-03-14 > 11:37:11 -0400) > > are available in the Git repository at: > >

[U-Boot] [PATCH 1/1] efi_selftest: fix test_hii_string_get_string()

The check testing the string result of get_string() returned the wrong result. The result was ignored. Use efi_st_strcmp_16_8() for the string comparison. Signed-off-by: Heinrich Schuchardt --- lib/efi_selftest/efi_selftest_hii.c | 17 - 1 file changed, 4 insertions(+), 13

Re: [U-Boot] [PATCH 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN

Hi Simon, you were replying to v1 where v2 has already been sent. However, this patch hasn't changed, so I'm commenting here. Am 19.03.2019 um 02:24 schrieb Simon Glass: Hi Simon, On Tue, 12 Mar 2019 at 05:35, Simon Goldschmidt wrote: Some platforms (like socfpga A10) need a big hep

Re: [U-Boot] [PATCH v3 3/3] poplar: enable Ethernet driver support

On Sun, Mar 10, 2019 at 3:53 AM Shawn Guo wrote: > > The 'phy' reset of gmac device in kernel device tree is not generic > enough for u-boot to use, so we need to overwrite the 'resets' property > as needed. With this device tree fixup and poplar_defconfig changes, > Ethernet starts working on

Re: [U-Boot] [PATCH v3 1/3] reset: add reset driver for HiSilicon platform

Hi Shawn, On Sun, Mar 10, 2019 at 3:53 AM Shawn Guo wrote: > > It adds a Driver Model compatible reset driver for HiSlicon platform. > The driver implements a custom .of_xlate function, and uses .data field > as reset register offset and .id field as bit shift. > > Signed-off-by: Shawn Guo >

Re: [U-Boot] [PATCH v3 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform

On Sun, Mar 10, 2019 at 3:52 AM Shawn Guo wrote: > > It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon > SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but > quite a lot of code gets rewritten and cleaned up to adopt driver model > and PHY API. > >

[U-Boot] [PATCH 1/1] efi_loader: remove superfluous check in efi_setup_loaded_image()

It does not make any sense to check if a pointer is NULL if we have dereferenced it before. Fixes Coverity CID 185827 Signed-off-by: Heinrich Schuchardt --- lib/efi_loader/efi_boottime.c | 6 ++ 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/lib/efi_loader/efi_boottime.c

[U-Boot] [PATCH 1/1] efi_loader: memory leak in efi_dump_single_var()

A misplaced return statement lead to a memory leak in efi_dump_single_var(). Fixes Coverity CID 185829 Signed-off-by: Heinrich Schuchardt --- cmd/nvedit_efi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/cmd/nvedit_efi.c b/cmd/nvedit_efi.c index ca32566a615..e65b38dbf39 100644 ---

[U-Boot] [PATCH 1/1] efi_loader: missing return in efi_get_next_variable_name()

Add a missing return statement in efi_get_next_variable_name(). Fixes Coverity CID 185834 Signed-off-by: Heinrich Schuchardt --- lib/efi_loader/efi_variable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c index

Re: [U-Boot] [PATCH v2 15/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support

On 3/18/19 5:24 PM, Thierry Reding wrote: From: Thierry Reding The Jetson Nano Developer Kit is a Tegra X1 based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4 GB of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot used for

Re: [U-Boot] [PATCH] p2371-2180: Build position independent binary

On 3/19/19 6:12 AM, Thierry Reding wrote: On Mon, Mar 18, 2019 at 12:31:32PM -0600, Stephen Warren wrote: On 3/8/19 1:10 PM, Thierry Reding wrote: From: Thierry Reding In order to support chainloading of U-Boot by an earlier bootloader, make sure the binary is position independent, so that

Re: [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig

Am 19.03.2019 um 17:19 schrieb Chee, Tien Fong: On Fri, 2019-03-15 at 21:13 +0100, Simon Goldschmidt wrote: Instead of fixing the SPL stack to 64 KiB in the board config header via CONFIG_SYS_SPL_MALLOC_SIZE, let's just use CONFIG_SPL_SYS_MALLOC_F_LEN in the defconfig. This also has the

Re: [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig

On Fri, 2019-03-15 at 21:13 +0100, Simon Goldschmidt wrote: > Instead of fixing the SPL stack to 64 KiB in the board config header > via > CONFIG_SYS_SPL_MALLOC_SIZE, let's just use > CONFIG_SPL_SYS_MALLOC_F_LEN > in the defconfig. > > This also has the advandage that it removes sub-mach specific

[U-Boot] [PATCH 11/11] arm: at91: Add gardena-gateway-at91sam support

The GARDENA smart Gateway boards are equipped with an Atmel / Microchip AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. This patch adds support for this board including SPL support. Therefore the AT91Boostrap is not needed on this platform any more. Signed-off-by: Stefan

[U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory

This patch moves the AT91SAM NAND booting SPL image "boot.bin" which includes the ECC values from the root directory into the spl directory, where all SPL related images are located. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Andreas Bießmann Cc: Eugen Hristev ---

[U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version

This patch adds an alterative SPL version of atmel_serial_enable_clk(). This enables the usage of this driver without full clock support (in drivers and DT nodes). This saves some space in the SPL image. If some boards need a different clock than the one provided with this patch, then support for

[U-Boot] [PATCH 09/11] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary

This patch adds the CONFIG_SPL_IMAGE option to select the SPL image that shall be used to generate the combined SPL + U-Boot image. The default value is the current value "spl/u-boot-spl.bin". This patch also sets CONFIG_SPL_IMAGE to "spl/boot.bin" for AT91 targets which use SPL NAND support

[U-Boot] [PATCH 02/11] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled

This patch adds a call to spl_early_init() to board_init_f() which is needed when CONFIG_SPL_OF_CONTROL is configured. This is necessary for the early SPL setup including the DTB setup for later usage. Please note that this call might also be needed for non SPL_OF_CONTROL board, like the smartweb

[U-Boot] [PATCH 06/11] arm: at91: Enable watchdog support

This patch enables and starts the watchdog on the AT91 platform if configured. Currently the WD timeout is configured to 16 seconds, which is the longest value for this timer. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Andreas Bießmann Cc: Eugen Hristev --- arch/arm/mach-at91/clock.c

[U-Boot] [PATCH 10/11] arm: at91: siemens: Add support to generate combined SPL+U-Boot image

This patch adds the necessary defines to the Siemens AT91SAM based boards (smartweb, corvus and taurus) to generate the combined binary image with SPL and main U-Boot image combined (u-boot-with-spl.bin). Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Andreas Bießmann Cc: Eugen Hristev

[U-Boot] [PATCH 07/11] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds

This patch adds _image_binary_end to the SPL linker script. This will be used be the upcoming GARDENA AT91SAM based platform, which uses DT in SPL and configures CONFIGURE_SPL_SEPARATE_BSS. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Andreas Bießmann Cc: Eugen Hristev ---

[U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled

This patch adds some checks, so that the watchdog can be enabled in main U-Boot proper but can be disabled in SPL. This will be used by some AT91SAM based boards, which might enable the watchdog in the main U-Boot proper and not in SPL. It will be enabled in SPL by default there, so no need to

[U-Boot] [PATCH 01/11] arm: at91: Makefile: Compile lowlevel_init only when really necessary

Make sure that lowlevel_init is not compiled when CONFIG_SKIP_LOWLEVEL_INIT_ONLY is configured. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Andreas Bießmann Cc: Eugen Hristev --- arch/arm/mach-at91/arm926ejs/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git

[U-Boot] [PATCH 05/11] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start()

This patch fixes the timer register setup in at91_wdt_start() to correctly configure the register again. The input timeout value is now in milli-seconds instead of seconds with the new watchdog API. Make sure to take this into account and only use a max timeout value of 16 seconds as appropriate

[U-Boot] [PATCH] spl: spl_nand.c: Add NAND loading message

This patch adds a short message to the SPL NAND loader, which displays the source and destinations addresses including the size of the loaded image, like this: U-Boot SPL 2019.04-rc3-00113-g486efd8aaf (Mar 15 2019 - 14:18:02 +0100) Trying to boot from NAND Loading U-Boot from 0x0004 (size

Re: [U-Boot] UCLASS_MISC bug

+ Simon Glass Hi Serguey, On 15/03/2019 22:55, Sergey Kubushyn wrote: I would like to point that this was not a very good idea: === Cut === --- uboot-imx-next/drivers/misc/misc-uclass.c    2018-12-20 20:35:22.505180339 -0800 +++ u-boot-imx/drivers/misc/misc-uclass.c    2019-03-13

Re: [U-Boot] [PATCH] ARM: kirkwood: remove obsolete call to icache_enable

On 19.03.19 15:50, Leigh Brown wrote: Commit 93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file") changed cache setup for Kirkwood such that icache_enable() is now called from enable_caches() which is called from initr_caches() which is in the list of functions in

[U-Boot] [PATCH] ARM: kirkwood: remove obsolete call to icache_enable

Commit 93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file") changed cache setup for Kirkwood such that icache_enable() is now called from enable_caches() which is called from initr_caches() which is in the list of functions in init_sequence_r[] prior to

[U-Boot] [PATCH] ARM: meson: display Amlogic SoC Information

The Amlogic SoCs have a registers containing the die revision and packaging type to determine the SoC family and package marketing name like S905X for the GXL SoC Family. This code is taken from the Linux meson-gx-socinfo driver and adapted to U-Boot printing. Signed-off-by: Julien Masson ---

Re: [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL

On Tue, Mar 19, 2019 at 05:01:42PM +0530, Faiz Abbas wrote: > Hi Tom, > > On 19/03/19 4:49 PM, Tom Rini wrote: > > Enable support for SPL_OF_CONTROL on this platform. That means doing a > > few things: > > - Add u-boot,dm-pre-reloc to a number of nodes > > - Drop static platdata in the board

Re: [U-Boot] [PATCH 1/3] thermal: Add multiple instance support

On 3/19/2019 6:53 AM, Simon Glass wrote: Hi Keerthy, On Mon, 11 Mar 2019 at 14:13, Keerthy wrote: Currently single instance temperature read out is supported. Enhance the same to support multiple instances. Signed-off-by: Keerthy --- arch/arm/mach-imx/cpu.c | 2 +-

[U-Boot] [PATCH 2/3] arm64: zynqmp: Define label for flash node

From: Siva Durga Prasad Paladugu Define a label for flash node so that it can be referenced easily as required. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek --- arch/arm/dts/zynqmp-mini-qspi.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git

[U-Boot] [PATCH 3/3] arm64: xilinx: zynqmp: Remove unneeded configs

From: Siva Durga Prasad Paladugu Remove unneeded configs from mini qspi configuration so that it saves space for this mini configuration. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek --- configs/xilinx_zynqmp_mini_qspi_defconfig | 2 ++ 1 file changed, 2

[U-Boot] [PATCH 1/3] arm64: zynqmp: Add spi-flash compatible string to flash node

From: Siva Durga Prasad Paladugu spi-flash compatible string is needed for reading tx and rx bus widths, hence add this compatible string to flash node. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek --- arch/arm/dts/zynqmp-mini-qspi.dts | 2 +- 1 file changed, 1

[U-Boot] Please pull u-boot-marvell/master

Hi Tom, please pull the following Marvell related patches, mostly fixes which should go into the upcoming release: - Enable network interface on clearfog_gt_8k (Baruch) - Fix dreamplug boot by adding an spi0 alias to the DT

Re: [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards

On 18.03.19 08:51, Chris Packham wrote: Prior to commit 93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file") the kirkwood boards didn't have and dcache support. The network and usb drivers rely on this. Set CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h.

Re: [U-Boot] [PATCH] ARM: mvebu: use correct name for pcie controller

On 16.03.19 08:46, Chris Packham wrote: When armada-385.dtsi was sync'd from Linux the name of the node describing the pcie controller was changed from pcie-controller to pcie. Some of the boards that include armada-385.dtsi were missed in the update retaining the old name. This updates the

Re: [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR

On 02.03.19 08:45, Chris Packham wrote: This board uses Micron N25Q256A SPI flash. Enable SPI_FLASH_BAR to allow us to access the whole chip. Signed-off-by: Chris Packham Cc: Vignesh R Applied to u-boot-marvell/master. Thanks, Stefan ___ U-Boot

Re: [U-Boot] [PATCH] ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000

On 01.03.19 02:30, Chris Packham wrote: Set CONFIG_SYS_MALLOC_F_LEN to match the rest of the mvebu boards. The default of 0x400 is not enough when booting from SPI. Signed-off-by: Chris Packham Applied to u-boot-marvell/master. Thanks, Stefan ___

Re: [U-Boot] [PATCH 2/2] mv_ddr: ddr3: only use active chip-selects when tuning ODT

On 28.02.19 22:11, Chris Packham wrote: From: Chris Packham Inactive chip-selects will give invalid values for read_sample so don't consider them when trying to determine the overall min/max read sample. Signed-off-by: Chris Packham

Re: [U-Boot] [PATCH 1/2] mv_ddr: ddr3: fix tRAS timimg parameter

On 28.02.19 22:11, Chris Packham wrote: From: Chris Packham Based on the JEDEC standard JESD79-3F. The tRAS timings should include the highest speed bins at a given frequency. This is similar to commit 683c67b ("mv_ddr: ddr3: fix tfaw timimg parameter") where the wrong comparison was used in

Re: [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug

On 28.02.19 08:53, Chris Packham wrote: The conversion to DM_SPI managed to break accessing the environment on dreamplug. This is because the environment code relies on being to able to select the SPI device based on the sequence number. Add an alias so that the spi0 bus gets sequence number 0.

Re: [U-Boot] [PATCH] MAINTAINERS: Update u-boot-marvell entry

On 15.02.19 13:56, Stefan Roese wrote: This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better

Re: [U-Boot] [PATCH] configs/clearfog_gt_8k: add network interface support

On 11.02.19 13:19, Baruch Siach wrote: Enable the mvpp2 network driver for the Armada 8K SoC. Enable the Marvell PHY driver for the on-board 1512 PHY. Signed-off-by: Baruch Siach Applied to u-boot-marvell/master. Thanks, Stefan ___ U-Boot mailing

Re: [U-Boot] [PATCH] pci: pci_mvebu: Add comment about missing of_n_addr_cells() call

On 11.02.19 07:53, Stefan Roese wrote: This patch adds a comment to explain the use of the hardcoded value for the number of address cells in mvebu_get_tgt_attr(). This should help to rework this function, once CONFIG_OF_LIVE is enabled for MVEBU in general. Signed-off-by: Stefan Roese Cc: Bin

Re: [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing

On 3/19/19 10:49 AM, Ley Foon Tan wrote: > On Tue, Mar 19, 2019 at 5:39 PM Marek Vasut wrote: >> >> On 3/19/19 4:14 AM, Ley Foon Tan wrote: >>> On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: On 3/12/19 9:31 AM, Ley Foon Tan wrote: > Scrub memory content if ECC is enabled and it

Re: [U-Boot] [PATCH] p2371-2180: Build position independent binary

On Mon, Mar 18, 2019 at 12:31:32PM -0600, Stephen Warren wrote: > On 3/8/19 1:10 PM, Thierry Reding wrote: > > From: Thierry Reding > > > > In order to support chainloading of U-Boot by an earlier bootloader, > > make sure the binary is position independent, so that the earlier boot- > > loader

[U-Boot] [PATCH 1/1] efi_loader: endless loop in add_strings_package()

Avoid an endless loop in add_strings_package(). Fixes Coverity CID 185833 Suggested-by: Takahiro Akashi Signed-off-by: Heinrich Schuchardt --- lib/efi_loader/efi_hii.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/lib/efi_loader/efi_hii.c b/lib/efi_loader/efi_hii.c

Re: [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL

Hi Tom, On 19/03/19 4:49 PM, Tom Rini wrote: > Enable support for SPL_OF_CONTROL on this platform. That means doing a > few things: > - Add u-boot,dm-pre-reloc to a number of nodes > - Drop static platdata in the board file. > - A lot of tweaks to the defconfig. We remove some things such as >

Re: [U-Boot] [PATCH] hikey: Take peripherals out of reset during board init

Hi Mani, This looks like a bug in the Linux kernel. The kernel driver should be correctly handling the reset lines of the I2C or SPI peripheral rather than replying on the bootloader to have already taken it out of reset. Peter. On Fri, 8 Mar 2019 at 08:57, Manivannan Sadhasivam <

[U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL

Enable support for SPL_OF_CONTROL on this platform. That means doing a few things: - Add u-boot,dm-pre-reloc to a number of nodes - Drop static platdata in the board file. - A lot of tweaks to the defconfig. We remove some things such as SPL_USE_ARCH_MEMCPY/SET for space. Increase our malloc

[U-Boot] [PATCHv2 1/2] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place

The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific notion but rather "where is our previous stage loaded in memory?" option. Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for our HS builds that are not using SPL anyhow. Cc: Vitaly Andrianov Cc: Andrew F. Davis

Re: [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver

On Tue, Mar 19, 2019 at 5:39 PM Marek Vasut wrote: > > On 3/19/19 4:26 AM, Ley Foon Tan wrote: > > On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: > >> > >> On 3/12/19 9:31 AM, Ley Foon Tan wrote: > >>> Move SDRAM size check to SDRAM driver. sdram_calculate_size() > >>> is called in SDRAM

Re: [U-Boot] [PATCH v2] arm: fix hvc call

Hi Tom > -Original Message- > From: Tom Rini > Sent: 15 March 2019 16:08 > To: Ibai Erkiaga Elorza > Cc: Alexander Graf ; u-boot@lists.denx.de; Sumit Garg > ; Heinrich Schuchardt ; Albert > Aribaud > Subject: Re: [U-Boot][PATCH v2] arm: fix hvc call > > On Fri, Mar 15, 2019 at

Re: [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing

On Tue, Mar 19, 2019 at 5:39 PM Marek Vasut wrote: > > On 3/19/19 4:14 AM, Ley Foon Tan wrote: > > On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: > >> > >> On 3/12/19 9:31 AM, Ley Foon Tan wrote: > >>> Scrub memory content if ECC is enabled and it is not > >>> from warm reset boot. > >>> >

[U-Boot] [PATCH] ARM: HYP/non-sec: Don't enable ARMV7_LPAE for old sunxi kernels

Old sunxi kernels fail to boot with ARMV7_LPAE enabled. Signed-off-by: Jonathan Liu --- arch/arm/cpu/armv7/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig index 73d57a2aae..cdb7e402b4 100644 ---

Re: [U-Boot] [PATCH 06/10] board: altera: Stratix10: Add ft_board_setup()

On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: > > On 3/12/19 9:31 AM, Ley Foon Tan wrote: > > Add ft_board_setup() function to setup memory banks before > > boot to Linux. > > Shouldn't bootm/booti be doing just that already ? Don't need this if we use fdtdec_setup_memory_banksize(). > > >

Re: [U-Boot] [PATCH 05/10] board: altera: Stratix10: Add board_get_usable_ram_top()

On Tue, Mar 12, 2019 at 10:40 PM Marek Vasut wrote: > > On 3/12/19 3:33 PM, Westergreen, Dalon wrote: > > On Tue, 2019-03-12 at 11:46 +0100, Marek Vasut wrote: > >> On 3/12/19 9:31 AM, Ley Foon Tan wrote: > >>> Add board_get_usable_ram_top() function. Limit maximum usable > >>> ram top to 2GB. >

Re: [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver

On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: > > On 3/12/19 9:31 AM, Ley Foon Tan wrote: > > Move SDRAM size check to SDRAM driver. sdram_calculate_size() > > is called in SDRAM initialization already, avoid calling > > twice in size check function. > > > > Signed-off-by: Ley Foon Tan > >

Re: [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing

On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: > > On 3/12/19 9:31 AM, Ley Foon Tan wrote: > > Scrub memory content if ECC is enabled and it is not > > from warm reset boot. > > > > Enable icache and dcache before scrub memory > > and use "DC ZVA" instruction to clear memory > > to zeros.

Re: [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata

Hi Praneeth, Igor, On Mon, Mar 18, 2019 at 04:20:16PM -0500, Bajjuri, Praneeth wrote: > Eugeniu, [..] > Not a glitch, Igor's linaro email id is no longer active. He might respond > with updated email > address soon. Great news. Looking forward for v4 of this series. Many thanks, Eugeniu.

[U-Boot] [PATCH] rsa: check that pointer checksum isn't NULL before using it

The pointer checksum were used before checking that it isn't NULL. We move the code that use it after the check. Reported-by: Coverity (CID: 185835) Signed-off-by: Philippe Reynes --- lib/rsa/rsa-verify.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/rsa/rsa-verify.c

Re: [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver

On 3/19/19 10:46 AM, Ley Foon Tan wrote: > On Tue, Mar 19, 2019 at 5:39 PM Marek Vasut wrote: >> >> On 3/19/19 4:26 AM, Ley Foon Tan wrote: >>> On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: On 3/12/19 9:31 AM, Ley Foon Tan wrote: > Move SDRAM size check to SDRAM driver.

Re: [U-Boot] [PATCH v3] usb: host: Print device name when scanning

On 3/19/19 10:01 AM, Ismael Luceno Cortes wrote: > On 19/Mar/2019 02:14, Marek Vasut wrote: >> On 3/18/19 2:21 PM, Ismael Luceno Cortes wrote: >>> Drop the counter, it has no meaning other than being the order in which >>> the interface is found; the name assigned to the USB host controller >>>

Re: [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.

Hi Krzysztof, On Tue, 19 Mar 2019 at 01:54, Anand Moon wrote: > > Hi Krzysztof, > > On Mon, 18 Mar 2019 at 23:33, Krzysztof Kozlowski wrote: > > > > On Mon, 18 Mar 2019 at 18:49, Anand Moon wrote: > > > > > > Hi Krzysztof, > > > > > > On Mon, 18 Mar 2019 at 18:20, Krzysztof Kozlowski wrote:

Re: [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing

On 3/19/19 4:14 AM, Ley Foon Tan wrote: > On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: >> >> On 3/12/19 9:31 AM, Ley Foon Tan wrote: >>> Scrub memory content if ECC is enabled and it is not >>> from warm reset boot. >>> >>> Enable icache and dcache before scrub memory >>> and use "DC ZVA"

Re: [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver

On 3/19/19 4:26 AM, Ley Foon Tan wrote: > On Tue, Mar 12, 2019 at 7:03 PM Marek Vasut wrote: >> >> On 3/12/19 9:31 AM, Ley Foon Tan wrote: >>> Move SDRAM size check to SDRAM driver. sdram_calculate_size() >>> is called in SDRAM initialization already, avoid calling >>> twice in size check

Re: [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards

Hi Leigh, On 19.03.19 10:29, Leigh Brown wrote: While collecting the queued fixes for the upcoming release, I do have one question regarding this Kirkwood cache issue (I don't have such a board here, so I can't test anything): Do we need this patch applied [1], if the

Re: [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards

Hi Stefan, On 2019-03-19 08:04, Stefan Roese wrote: On 19.03.19 09:00, Chris Packham wrote: On Tue, 19 Mar 2019, 8:39 PM Stefan Roese, > wrote: On 18.03.19 08:51, Chris Packham wrote: > Prior to commit 93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache

[U-Boot] [PATCH v4] usb: host: Print device name when scanning

Drop the counter, it has no meaning other than being the order in which the interface is found; the name assigned to the USB host controller interface is a better indicator. Example of the original output: > USB0: USB EHCI 1.10 > scanning bus 0 for devices... 2 USB Device(s) found >

[U-Boot] [PATCH 9/9] riscv: ae350: enable SMP

From: Rick Chen Signed-off-by: Rick Chen Cc: Greentime Hu --- board/AndesTech/ax25-ae350/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/board/AndesTech/ax25-ae350/Kconfig b/board/AndesTech/ax25-ae350/Kconfig index 44cb302..5e682b6 100644 --- a/board/AndesTech/ax25-ae350/Kconfig

[U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.

From: Rick Chen Signed-off-by: Rick Chen Cc: Greentime Hu --- arch/riscv/dts/ae350_32.dts | 81 + arch/riscv/dts/ae350_64.dts | 47 +++--- 2 files changed, 101 insertions(+), 27 deletions(-) diff --git

[U-Boot] [PATCH 6/9] riscv: ax25: Add platform-specific Kconfig options

From: Rick Chen Add ax25 RISC-V platform-specific Kconfig options, to include CPU and timer drivers. Signed-off-by: Rick Chen Cc: Greentime Hu --- arch/riscv/cpu/ax25/Kconfig | 6 ++ 1 file changed, 6 insertions(+) diff --git a/arch/riscv/cpu/ax25/Kconfig b/arch/riscv/cpu/ax25/Kconfig

[U-Boot] [PATCH 5/9] riscv: ae350: disable ATCPIT100 timer

From: Rick Chen Disable ATCPIT100 SoC timer and replace by PLMT. Signed-off-by: Rick Chen Cc: Greentime Hu --- configs/ae350_rv32_defconfig | 1 - configs/ae350_rv64_defconfig | 1 - 2 files changed, 2 deletions(-) diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig

[U-Boot] [PATCH 7/9] riscv: ax25: Andes specific cache shall only support in M-mode.

From: Rick Chen Limit the cache configuration only can be supported in M mode. It can not be manipulated in S mode. Signed-off-by: Rick Chen Cc: Greentime Hu --- arch/riscv/cpu/ax25/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/cpu/ax25/Kconfig

[U-Boot] [PATCH 3/9] riscv: Add a SYSCON driver for Andestech's PLMT

From: Rick Chen The platform-Level Machine Timer(PLMT) block holds memory-mapped mtime register associated with timer tick. This driver implements the riscv_get_time()which are required by the generic RISC-V timer driver. Signed-off-by: Rick Chen Cc: Greentime Hu --- arch/riscv/Kconfig

[U-Boot] [PATCH 4/9] riscv: ae350: initialize PLIC

From: Rick Chen Initialize PLIC when ae350 board startup. Signed-off-by: Rick Chen Cc: Greentime Hu --- board/AndesTech/ax25-ae350/ax25-ae350.c | 30 ++ 1 file changed, 30 insertions(+) diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c

[U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC

From: Rick Chen The Platform-Level Interrupt Controller(PLIC) block holds memory-mapped claim and pending registers associated with software interrupt.It is required for handling IPI. Signed-off-by: Rick Chen Cc: Greentime Hu --- arch/riscv/Kconfig | 9

[U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node

From: Rick Chen To enumerate devices on the /soc/ node, create a "simple-bus" driver to match "andestech,riscv-ae350-soc". Signed-off-by: Rick Chen Cc: Greentime Hu --- arch/riscv/cpu/ax25/cpu.c | 16 1 file changed, 16 insertions(+) diff --git a/arch/riscv/cpu/ax25/cpu.c

[U-Boot] [PATCH 0/9] AE350 SMP support RISC-V

From: Rick Chen This patch series was based on Lukas's patchsets of SMP support for RISC-V. Add Andestech's PLIC for IPI handling and PLMT to replace Soc timer. It has been verified on AE350 SMP platform in M-mode and boot SMP kernel ok. Verification in S-mode is still on-going. Rick Chen (9):

Re: [U-Boot] [PATCH v3] usb: host: Print device name when scanning

On 19/Mar/2019 02:14, Marek Vasut wrote: > On 3/18/19 2:21 PM, Ismael Luceno Cortes wrote: > > Drop the counter, it has no meaning other than being the order in which > > the interface is found; the name assigned to the USB host controller > > interface is a better indicator. > > > > Example of

Re: [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle

On Tue, 2019-03-19 at 09:22 +0800, Simon Glass wrote: > Hi Tien Fong, > > On Mon, 11 Mar 2019 at 12:28, Chee, Tien Fong om> wrote: > > > > > > On Sun, 2019-03-10 at 15:51 -0600, Simon Glass wrote: > > > > > > Hi Tien Fong, > > > > > > On Tue, 26 Feb 2019 at 05:37, Chee, Tien Fong > > el.c >

[U-Boot] [PATCH v12 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK

From: Tien Fong Chee Update the default configuration file to enable the necessary functionality the get the kit working. Signed-off-by: Tien Fong Chee --- changes for v12 - No changes. changes for v11 - No changes. changes for v10 - No changes. changes for v9 - No changes. changes for

[U-Boot] [PATCH v12 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading

From: Tien Fong Chee Add FPGA driver to support program FPGA with FPGA bitstream loading from filesystem. The driver are designed based on generic firmware loader framework. The driver can handle FPGA program operation from loading FPGA bitstream in flash to memory and then to program FPGA.

[U-Boot] [PATCH v12 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs

From: Tien Fong Chee Add support for loading FPGA bitstream to get DDR up running before U-Boot is loaded into DDR. Boot device initialization, generic firmware loader and SPL FAT support are required for this whole mechanism to work. Signed-off-by: Tien Fong Chee --- changes for v12 - No

[U-Boot] [PATCH v12 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL

From: Tien Fong Chee Increasing Malloc pool size up to 0x15000 is required to support FAT in SPL . The result of calculation is come from after applying some few patches which are required for optimizing vfat and maximizing resusable of the memory pool, and then followed by the size required

[U-Boot] [PATCH v12 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK

From: Tien Fong Chee Update the default configuration file to enable the necessary functionality to get the SoCFPGA loadfs driver support. This would enable the implementation of programming bitstream into FPGA from MMC. Signed-off-by: Tien Fong Chee --- changes for v12 - No changes.

[U-Boot] [PATCH v12 3/9] ARM: socfpga: Cleaning up and ensuring consistent format messages in driver

From: Tien Fong Chee Ensure all the debug messages are always prefix with "FPGA: " and comment beginning with uppercase letter. Signed-off-by: Tien Fong Chee --- changes for v12 - Improved the commit messages. changes for v11 - No changes. changes for v10 - This patch was split out from

[U-Boot] [PATCH v12 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK

From: Tien Fong Chee Add default fitImage file bundling FPGA bitstreams for Arria10. Signed-off-by: Tien Fong Chee --- changes for v12 - No changes. changes for v11 - Replaced core image node "-2" with "-1", the numeric associates the core and periph images in case where there are

  1   2   >