Current U-Boot implements 64-bit boundary for efi_guid_t structure.
It follows the UEFI specification, page 21 of the UEFI Specification v2.10
says about EFI_GUID:
128-bit buffer containing a unique identifier value. Unless
otherwise specified, aligned on a 64-bit boundary.
On the other hand,
Thecus N2350 is a NAS based on Marvell Armada 385 SoC.
Specification:
- Processor: Marvel MV88F6820 Dual Core at 1GHz
- 1 GiB DDR4 RAM
- 4MB Macronix mx25l3205d SPI flash
- 512MB Hynix H27U4G8F2DTR-BC NAND flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 2x SATA (hot swap
Hi Ilias,
On Fri, 27 Jan 2023 at 23:18, Ilias Apalodimas
wrote:
>
> Hi Kojima-san
>
> On Fri, Jan 27, 2023 at 08:51:28PM +0900, Masahisa Kojima wrote:
> > Current U-Boot implements 64-bit boundary for efi_guid_t structure.
> > It follows the UEFI specification, page 21 of the UEFI Specification
Device name are typically longer than 8 characters. This leads to ragged
output.
Only the I and O bit of the device flags are of interest for the user.
Writing a hexadecimal number is just confusing.
Before the patch the output looked like this:
=> coninfo
List of available devices:
> Date: Fri, 27 Jan 2023 17:48:32 -0500
> From: Tom Rini
>
> On Sat, Jan 21, 2023 at 08:27:52PM +0100, Mark Kettenis wrote:
>
> > In order to support IOMMUs in non-bypass mode we need device ops
> > to map and unmap DMA memory. The map operation enters a mapping
> > for a region specified by
On Fri, Jan 27, 2023 at 02:19:40PM -0800, Tony Dinh wrote:
> Hi Tom,
>
> On Fri, Jan 27, 2023 at 2:06 PM Tom Rini wrote:
> >
> > On Fri, Jan 27, 2023 at 01:56:34PM -0800, Tony Dinh wrote:
> > > Hi Tom,
> > >
> > > On Fri, Jan 27, 2023 at 5:39 AM Tom Rini wrote:
> > > >
> > > > On Fri, Jan 27,
On Sat, Jan 21, 2023 at 08:27:52PM +0100, Mark Kettenis wrote:
> In order to support IOMMUs in non-bypass mode we need device ops
> to map and unmap DMA memory. The map operation enters a mapping
> for a region specified by CPU address and size into the translation
> table of the IOMMU and
On Thu, Jan 26, 2023 at 02:44:09PM +0100, Mark Kettenis wrote:
> There are no SPL/TPL variants of CONFIG_CLK_EXYNOS and
> CONFIG_ARCH_APPLE, so switch from CONFIG_IS_ENABLED to
> IS_ENABLED.
>
> Signed-off-by: Mark Kettenis
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
On Fri, Jan 27, 2023 at 08:14:22PM +0100, Heinrich Schuchardt wrote:
> Dear Tom,
>
> The following changes since commit b3b6cc28c240507503e471edc105e2d93a277126:
>
> Merge tag 'dm-pull-26jan23' of
> https://source.denx.de/u-boot/custodians/u-boot-dm (2023-01-26 21:57:38
> -0500)
>
> are
Hi Tom,
On Fri, Jan 27, 2023 at 2:06 PM Tom Rini wrote:
>
> On Fri, Jan 27, 2023 at 01:56:34PM -0800, Tony Dinh wrote:
> > Hi Tom,
> >
> > On Fri, Jan 27, 2023 at 5:39 AM Tom Rini wrote:
> > >
> > > On Fri, Jan 27, 2023 at 01:31:06PM +0100, Stefan Roese wrote:
> > > > Hi Tony,
> > > >
> > > >
On Fri, Jan 27, 2023 at 01:56:34PM -0800, Tony Dinh wrote:
> Hi Tom,
>
> On Fri, Jan 27, 2023 at 5:39 AM Tom Rini wrote:
> >
> > On Fri, Jan 27, 2023 at 01:31:06PM +0100, Stefan Roese wrote:
> > > Hi Tony,
> > >
> > > On 1/27/23 07:13, Tony Dinh wrote:
> > > > Hi all,
> > > >
> > > > On Thu, Jan
Hi Tom,
On Fri, Jan 27, 2023 at 5:39 AM Tom Rini wrote:
>
> On Fri, Jan 27, 2023 at 01:31:06PM +0100, Stefan Roese wrote:
> > Hi Tony,
> >
> > On 1/27/23 07:13, Tony Dinh wrote:
> > > Hi all,
> > >
> > > On Thu, Jan 26, 2023 at 3:38 PM Tony Dinh wrote:
> > > >
> > > > Hi all,
> > > >
> > > > I
A command called with incorrect parameters should set $? to 1 (false).
Instead of calling cmd_usage(cmdtp) and then returning 0 just return
CMD_RET_FAILURE.
Signed-off-by: Heinrich Schuchardt
---
cmd/tlv_eeprom.c | 11 ---
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git
Add missing information to the configuration section of the setexpr
man-page.
Signed-off-by: Heinrich Schuchardt
---
doc/usage/cmd/setexpr.rst | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/doc/usage/cmd/setexpr.rst b/doc/usage/cmd/setexpr.rst
index
On Fri, Jan 27, 2023 at 04:51:41PM +0100, Safae Ouajih wrote:
>
> On 27/01/2023 01:55, Simon Glass wrote:
> > Hi Safae,
> >
> > On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
> > > test_abootimg is extended to include the testing of boot images
> > > version 4. For this, boot.img and
On 1/27/23 19:15, Thierry Reding wrote:
On Fri, Jan 27, 2023 at 09:13:09AM +0200, Svyatoslav Ryhel wrote:
- ARM: tegra: remap clock_osc_freq for all Tegra family
Enum clock_osc_freq was designed to use only with T20.
This patch remaps it to use additional frequencies, added in
T30+ SoC while
The arg->session is not valid if arg->ret != NULL, so can't be
assigned, correct this.
Signed-off-by: Ivan Khoronzhuk
---
common/avb_verify.c | 9 +
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/common/avb_verify.c b/common/avb_verify.c
index 0520a71455..48ba8db51e
Ignore this version please, will send v4.
Skipped previous comment unintentionally.
--
Regards,
Ivan Khoronzhuk
On Sat, Jan 21, 2023 at 04:54:31PM +0100, Sjoerd Simons wrote:
> Add glue code for TI AM62 to the dwc3 driver; Most code adopted from
> TI vendor u-boot code.
>
> Signed-off-by: Sjoerd Simons
After talking with Marek, this should be reworked to go on top of:
On 1/27/23 12:51, Masahisa Kojima wrote:
Current U-Boot implements 64-bit boundary for efi_guid_t structure.
It follows the UEFI specification, page 21 of the UEFI Specification v2.10
says about EFI_GUID:
128-bit buffer containing a unique identifier value. Unless
otherwise specified,
Dear Tom,
The following changes since commit b3b6cc28c240507503e471edc105e2d93a277126:
Merge tag 'dm-pull-26jan23' of
https://source.denx.de/u-boot/custodians/u-boot-dm (2023-01-26 21:57:38
-0500)
are available in the Git repository at:
On Thu, Jan 19, 2023 at 12:55:19PM +, John Keeping wrote:
> Add the related include files to the power MAINTAINERS entry.
>
> Signed-off-by: John Keeping
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Jan 18, 2023 at 01:13:17PM -0700, Simon Glass wrote:
> On a second and third look, a recent patch seems to be writing to the
> wrong place - updating offsets from the address of the pointer instead
> of what the pointer points to.
>
> Fix it.
>
> Signed-off-by: Simon Glass
> Fixes:
On Wed, Jan 18, 2023 at 01:12:24PM +0100, Michael Walle wrote:
> Fix the copy and paste error.
>
> Signed-off-by: Michael Walle
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Jan 18, 2023 at 01:12:22PM +0100, Michael Walle wrote:
> If CONFIG_PINCTRL_FULL is enabled, never fall back to the simple
> implementation. pinctrl_select_state() is called for each device and it
> is expected to fail. A fallback to the simple imeplementation doesn't
> make much sense.
>
On Thu, Jan 05, 2023 at 10:31:09AM +0100, Massimo Pegorer wrote:
> Extend support for signing in auto-generated (-f auto) FIT. Previously,
> it was possible to get signed 'images' subnodes in the FIT using
> options -g and -o together with -f auto. This patch allows signing
> 'configurations'
On Wed, Jan 18, 2023 at 01:12:23PM +0100, Michael Walle wrote:
> Don't define an empty version for pinconfig_post_bind(). Just guard the
> call and let the linker garbage collection do the rest. This way, we
> also don't have to do any guesswork.
>
> Signed-off-by: Michael Walle
> Reviewed-by:
On Tue, Jan 17, 2023 at 04:59:23PM +0800, Jim Liu wrote:
> The NPCM driver can use on npcm7xx/npcm8xx
> so add npcm8xx header for driver.
>
> Signed-off-by: Jim Liu
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Jan 17, 2023 at 04:59:22PM +0800, Jim Liu wrote:
> Enable npcm845 i2c、ethernet、REGULATOR and security feature
>
> Signed-off-by: Jim Liu
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Jan 17, 2023 at 04:59:21PM +0800, Jim Liu wrote:
> Add functaion node list as below:
> 1. i2c
> 2. gmac
> 3. otp
> 4. aes
> 5. sha
> 6. rng
> 7. serial
>
> Signed-off-by: Jim Liu
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Jan 10, 2023 at 09:17:47PM +0530, Sinthu Raja wrote:
> From: Sinthu Raja
>
> Enable configs for building multiple dtbs into a single fit image
> and load the right dtb for next stage. This will help to use same
> defconfig for both EVM and SK.
>
> Signed-off-by: Sinthu Raja
For the
On Fri, Jan 06, 2023 at 12:02:50PM -0600, Andrew Davis wrote:
> This matches how this would be done in Linux and these functions
> do the alignment for us which makes the code look cleaner.
>
> Signed-off-by: Andrew Davis
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
The arg->session is not valid if arg->ret != NULL, so can't be
assigned, correct this. Also remove "while" loop as there is no
reason for looping till correct session is opened.
Signed-off-by: Ivan Khoronzhuk
---
common/avb_verify.c | 38 +++---
1 file changed,
On Fri, Jan 27, 2023 at 06:55:46PM +0100, Mario Kicherer wrote:
> On 2023-01-27 18:10, Tom Rini wrote:
> > Yes, all of the platforms that define the value (since it roughly means
> > "ROM set this value in something we can check") instead of enum'ing it
> > still compile that file and now fail to
On 2023-01-27 18:10, Tom Rini wrote:
Yes, all of the platforms that define the value (since it roughly means
"ROM set this value in something we can check") instead of enum'ing it
still compile that file and now fail to build.
Okay, I think I understand your point now. I am not sure what's the
On Fri, Jan 27, 2023 at 04:03:27PM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull these patches to your tree. Buildman doesn't show any issue and
> CI looks also good.
> https://source.denx.de/u-boot/custodians/u-boot-microblaze/-/commit/f0f86d39fec73479d4904e6d5b9db01a29597d58
>
>
Provide a man-page for the mtest command.
Signed-off-by: Heinrich Schuchardt
---
doc/usage/cmd/mtest.rst | 66 +
doc/usage/index.rst | 1 +
2 files changed, 67 insertions(+)
create mode 100644 doc/usage/cmd/mtest.rst
diff --git
Hi Safae,
On Fri, 27 Jan 2023 at 08:50, Safae Ouajih wrote:
>
>
> On 27/01/2023 01:54, Simon Glass wrote:
> > Hi Safae,
> >
> > On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
> >> Move from andr_boot_img_hdr_v0 to andr_image_data
> >> structure to prepare for boot image header
> >> version 3
On Fri, 27 Jan 2023 at 08:51, Safae Ouajih wrote:
>
>
> On 27/01/2023 01:54, Simon Glass wrote:
> > Hi Safae,
> >
> > On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
> >> In version 3 and 4 of boot image header, the vendor specific
> > vendor-spefcific
> >
> >> command line are located in
On Fri, 27 Jan 2023 at 08:50, Safae Ouajih wrote:
>
>
> On 27/01/2023 01:54, Simon Glass wrote:
> > Hi Safae,
> >
> > On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
> >> Content print is not supported for version 3 and 4 of boot image header.
> >> Thus, only print that content when v2 is
Hi Heiko,
On Thu, 26 Jan 2023 at 00:46, Heiko Schocher wrote:
>
> as Tom suggested get rid of CFG_EXTRA_ENV_SETTINGS and
> enable CONFIG_ENV_SOURCE_FILE and use text file
>
> board/socrates/socrates.env
>
> which contains the default environment. While at it,
> cleanup the default Environment.
>
On Fri, Jan 27, 2023 at 09:13:09AM +0200, Svyatoslav Ryhel wrote:
> - ARM: tegra: remap clock_osc_freq for all Tegra family
> Enum clock_osc_freq was designed to use only with T20.
> This patch remaps it to use additional frequencies, added in
> T30+ SoC while maintaining backwards compatibility
On 1/22/23 18:57, Ovidiu Panait wrote:
The actual function being documented is jump_to_image_optee(), not
jump_to_image_linux().
Signed-off-by: Ovidiu Panait
Reviewed-by: Heinrich Schuchardt
---
include/spl.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On Fri, Jan 27, 2023 at 05:56:48PM +0100, Mario Kicherer wrote:
> Hello Tom,
>
> On 2023-01-26 20:17, Tom Rini wrote:
> > This breaks a lot of platforms, as it only covers a few of the cases
> > where BOOT_DEVICE_NOR is listed. I would also really like to see how
> > this ends up being used in
Add default memory addresses for kernel_comp_addr_r and kernel_comp_size
to enable booting from a compressed kernel image. This area is temporarily
used to decompress the kernel image on-the-fly.
Signed-off-by: Christopher Obbard
---
include/configs/rk3328_common.h | 4 +++-
1 file changed, 3
Hello Tom,
On 2023-01-26 20:17, Tom Rini wrote:
This breaks a lot of platforms, as it only covers a few of the cases
where BOOT_DEVICE_NOR is listed. I would also really like to see how
this ends up being used in the board specific case as I do wonder if we
can't solve this some other way that
Unlike in Linux, -supply is not automatically appended to regulator
requests. Add it.
Fixes: 2645bc0e12 ("arm: layerscape: Add sfp driver")
Signed-off-by: Sean Anderson
---
drivers/misc/ls2_sfp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/ls2_sfp.c
On Thu, Jan 26, 2023 at 07:11:15PM +0100, Johan Jonker wrote:
>
>
> On 1/26/23 17:11, Chris Morgan wrote:
> > On Thu, Jan 19, 2023 at 12:21:02PM -0600, Chris Morgan wrote:
> >> On Thu, Jan 05, 2023 at 07:01:40PM +0100, Quentin Schulz wrote:
> >>> Hi Chris,
> >>>
> >>> Cc'ing the new mail address
On 27/01/2023 01:55, Simon Glass wrote:
Hi Safae,
On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
test_abootimg is extended to include the testing of boot images
version 4. For this, boot.img and vendor_boot.img have been
generated using mkbootimg tool with setting the header
version to
On 27/01/2023 01:54, Simon Glass wrote:
Hi Safae,
On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
In version 3 and 4 of boot image header, the vendor specific
vendor-spefcific
command line are located in vendor boot image. Thus, using
use the
extra command line to add those cmd to
On 27/01/2023 01:54, Simon Glass wrote:
Hi Safae,
On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
Content print is not supported for version 3 and 4 of boot image header.
Thus, only print that content when v2 is used.
Update android_print_contents() to print an error message
when trying
On 27/01/2023 01:54, Simon Glass wrote:
Hi Safae,
On Thu, 26 Jan 2023 at 09:05, Safae Ouajih wrote:
Move from andr_boot_img_hdr_v0 to andr_image_data
structure to prepare for boot image header
version 3 and 4.
Signed-off-by: Safae Ouajih
---
boot/image-android.c | 127
On Fri, Jan 27, 2023 at 04:00:15PM +0100, Daniel Schwierzeck wrote:
>
>
> On 1/27/23 14:45, Tom Rini wrote:
> > On Mon, Jan 23, 2023 at 02:59:05PM -0700, Simon Glass wrote:
> >
> > > In several places a 'select' is used to select a choice, which is not
> > > supported by Kconfig. In other
On 1/27/23 14:45, Tom Rini wrote:
On Mon, Jan 23, 2023 at 02:59:05PM -0700, Simon Glass wrote:
In several places a 'select' is used to select a choice, which is not
supported by Kconfig. In other places, the filename for the 'source'
command is not in quites.
Fix these two problems
On 1/26/23 00:27, Jagan Teki wrote:
Add u-boot,dm-spl and u-boot,dm-pre-reloc related properties
for Rockchip RK3588 SoC.
Signed-off-by: Jagan Teki
---
arch/arm/dts/rk3588-u-boot.dtsi | 101
1 file changed, 101 insertions(+)
create mode 100644
Hi Tom,
please pull these patches to your tree. Buildman doesn't show any issue and CI
looks also good.
https://source.denx.de/u-boot/custodians/u-boot-microblaze/-/commit/f0f86d39fec73479d4904e6d5b9db01a29597d58
Thanks,
Michal
The following changes since commit
On 1/25/23 13:06, Michal Simek wrote:
From: Algapally Santosh Sagar
FRU data is not displayed properly in case of 0xc1 fields.
The 0xC1 can be used in two cases.
1. Char record type 8-bit ASCII + Latin 1 with length of 1.
(For example board revision 'A')
2. C1h (type/length byte encoded to
On 1/24/23 16:19, Michal Simek wrote:
Hi,
fix and improve legacy format handling to cover cases where eeprom content
is corrupted and random. Very likely detection algorithm can be improved -
for example check that mac address is valid, check all strings, etc. but
the aim of this series is
CC Angelo's other address, as sysam.it is MIA.
On Fri, Jan 27, 2023 at 2:50 PM Tom Rini wrote:
> Hey all (and especially the non-U-Boot folks / lists),
>
> U-Boot has had support for the m68k architecture for practically forever
> it seems like. Unfortunately, it's also been a few years now
Hi Loic,
On Thu, 26 Jan 2023 at 02:24, Loic Poulain wrote:
>
> Verify that erasing blocks does not impact adjacent ones.
> - Write four blocks [0 1 2 3]
> - Erase two blocks [ 1 2 ]
> - Verify [0 1 2 3 ]
>
> Signed-off-by: Loic Poulain
> ---
> v2: Add this change to the series
>
>
Hi Tom,
On Thu, 26 Jan 2023 at 14:33, Tom Rini wrote:
>
> On Thu, Jan 26, 2023 at 02:29:53PM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Thu, 26 Jan 2023 at 11:16, Tom Rini wrote:
> > >
> > > On Thu, Jan 26, 2023 at 11:04:21AM -0700, Simon Glass wrote:
> > > > Hi Tom,
> > > >
> > > > On
On Fri, 27 Jan 2023 at 19:21, Eugen Hristev wrote:
>
> On 1/27/23 15:37, Jagan Teki wrote:
> > On Fri, 27 Jan 2023 at 19:03, Eugen Hristev
> > wrote:
> >>
> >> Hello Jagan,
> >>
> >>
> >> On 1/26/23 00:27, Jagan Teki wrote:
> >>> Add u-boot,dm-spl and u-boot,dm-pre-reloc related properties
>
Hi Kojima-san
On Fri, Jan 27, 2023 at 08:51:28PM +0900, Masahisa Kojima wrote:
> Current U-Boot implements 64-bit boundary for efi_guid_t structure.
> It follows the UEFI specification, page 21 of the UEFI Specification v2.10
> says about EFI_GUID:
> 128-bit buffer containing a unique
On Mon, Jan 23, 2023 at 02:59:05PM -0700, Simon Glass wrote:
> In several places a 'select' is used to select a choice, which is not
> supported by Kconfig. In other places, the filename for the 'source'
> command is not in quites.
>
> Fix these two problems throughout the tree, so that
On Fri, Jan 27, 2023 at 02:00:12PM +0100, Michal Suchanek wrote:
> It is reported that in some configurations it is not possible to boot
> because u-boot runs out of lmbs.
>
> commit 06d514d77c ("lmb: consider EFI memory map") increases lmb usage,
> hence is likely the cause of the lmb overflow.
On 24.01.2023 00:00, Simon Glass wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> The SPL_TPL part is in the wrong place. Fix it.
>
> Signed-off-by: Simon Glass
> Fixes: 71d4393f846 ("sysreset: Add Atmel/Microchip sysreset driver")
The "Programming Environments Manual for 32-Bit Implementations of the
PowerPC™ Architecture" says "W and G bits are not defined for IBAT
registers. Attempting to write to these bits causes boundedly-undefined
results"
The "e300 Power Architecture™ Core Family Reference Manual" says the
same:
On 1/27/23 15:37, Jagan Teki wrote:
On Fri, 27 Jan 2023 at 19:03, Eugen Hristev wrote:
Hello Jagan,
On 1/26/23 00:27, Jagan Teki wrote:
Add u-boot,dm-spl and u-boot,dm-pre-reloc related properties
for Rockchip RK3588 SoC.
It appears this file/commit does more than just adding u-boot,*
Hey all (and especially the non-U-Boot folks / lists),
U-Boot has had support for the m68k architecture for practically forever
it seems like. Unfortunately, it's also been a few years now since I've
seen anyone active in reviewing general patches to the architecture and
doing the little things
Hello Jagan,
On 1/26/23 00:27, Jagan Teki wrote:
Add u-boot,dm-spl and u-boot,dm-pre-reloc related properties
for Rockchip RK3588 SoC.
It appears this file/commit does more than just adding u-boot,* properties
Signed-off-by: Jagan Teki
---
arch/arm/dts/rk3588-u-boot.dtsi | 101
On Fri, Jan 27, 2023 at 03:36:34PM +0530, Neha Malcom Francis wrote:
> Hi Simon
>
> On 24/01/23 03:29, Simon Glass wrote:
> > In several places a 'select' is used to select a choice, which is not
> > supported by Kconfig. In other places, the filename for the 'source'
> > command is not in
Hi Simon
On 24/01/23 03:29, Simon Glass wrote:
In several places a 'select' is used to select a choice, which is not
supported by Kconfig. In other places, the filename for the 'source'
command is not in quites.
Fix these two problems throughout the tree, so that kconfiglib does not
show any
27.01.2023 01:00, Dmitry Osipenko пишет:
> 26.01.2023 20:54, Thierry Reding пишет:
>> On Thu, Jan 26, 2023 at 07:08:54PM +0200, Svyatoslav Ryhel wrote:
>>> чт, 26 січ. 2023 р. о 12:35 Thierry Reding пише:
On Wed, Jan 25, 2023 at 05:41:08PM +0100, Thierry Reding wrote:
> On Tue, Jan
26.01.2023 20:54, Thierry Reding пишет:
> On Thu, Jan 26, 2023 at 07:08:54PM +0200, Svyatoslav Ryhel wrote:
>> чт, 26 січ. 2023 р. о 12:35 Thierry Reding пише:
>>>
>>> On Wed, Jan 25, 2023 at 05:41:08PM +0100, Thierry Reding wrote:
On Tue, Jan 24, 2023 at 08:57:48AM +0200, Svyatoslav Ryhel
On Fri, Jan 27, 2023 at 01:31:06PM +0100, Stefan Roese wrote:
> Hi Tony,
>
> On 1/27/23 07:13, Tony Dinh wrote:
> > Hi all,
> >
> > On Thu, Jan 26, 2023 at 3:38 PM Tony Dinh wrote:
> > >
> > > Hi all,
> > >
> > > I ran some tests today (Pogo V4 and NSA310S boards) with the latest
> > > master
On Fri, 27 Jan 2023 at 19:03, Eugen Hristev wrote:
>
> Hello Jagan,
>
>
> On 1/26/23 00:27, Jagan Teki wrote:
> > Add u-boot,dm-spl and u-boot,dm-pre-reloc related properties
> > for Rockchip RK3588 SoC.
>
> It appears this file/commit does more than just adding u-boot,* properties
>
> >
> >
On Fri, Jan 27, 2023 at 08:55:42AM +0100, Sjoerd Simons wrote:
> On Thu, 2023-01-26 at 13:28 -0500, Tom Rini wrote:
> > On Thu, Jan 19, 2023 at 09:38:17AM +0100, Sjoerd Simons wrote:
> > >
> > > As this is likely to impact more devices bump the default max
> > > regions to 16 so there is a bit
On Fri, Jan 27, 2023 at 06:50:52AM +0100, Heiko Schocher wrote:
> as Tom suggested get rid of CFG_EXTRA_ENV_SETTINGS and
> enable CONFIG_ENV_SOURCE_FILE and use text file
>
> board/socrates/socrates.env
>
> which contains the default environment. While at it,
> cleanup the default Environment.
On Thu, Jan 26, 2023 at 07:20:51PM -0700, Simon Glass wrote:
> Hi Tom,
>
> https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/14897
>
>
> The following changes since commit 27e0fb3b0823519aea2d42cd8bde20234dd87cef:
>
> Merge
On Fri, 27 Jan 2023 at 05:13, Jonas Karlman wrote:
>
> On 2023-01-26 23:16, Jonas Karlman wrote:
> > Hi Jagan,
> > On 2023-01-26 20:17, Jagan Teki wrote:
> >> On Fri, 27 Jan 2023 at 00:33, Jonas Karlman wrote:
> >>>
> >>> On 2023-01-26 19:26, Jagan Teki wrote:
> Hi Simon,
>
> On
Martin Rowe [2023-01-14 14:21:52]:
[adding Stefan and Pali to the Cc: loop to make them aware]
Hi,
> I did try to bisect the eMMC issue, but there are a few related
> breakages for different reasons over the last 2 years, so it's not one
> commit that has done it. For example, just the 4
It is reported that in some configurations it is not possible to boot
because u-boot runs out of lmbs.
commit 06d514d77c ("lmb: consider EFI memory map") increases lmb usage,
hence is likely the cause of the lmb overflow.
Fixes: 06d514d77c ("lmb: consider EFI memory map")
Link:
From: Rafał Miłecki
U-Boot environment variables are stored in ASCII format so "ethaddr"
requires parsing into binary to make it work with Ethernet interfaces.
This includes support for indexes to support #nvmem-cell-cells = <1>.
Signed-off-by: Rafał Miłecki
---
drivers/nvmem/layouts/Kconfig
From: Rafał Miłecki
U-Boot's "ethaddr" environment variable is very often used to store
*base* MAC address. It's used as a base for calculating addresses for
multiple interfaces. It's done by adding proper values. Actual offsets
are picked by manufacturers and vary across devices.
From: Rafał Miłecki
U-Boot environment variables can be found on various NVMEM devices (not
just MTD) so convert this driver to a generic layout one.
This way - thanks to using NVMEM generic API - this driver can be reused
in other scenarios.
For backward DT compatibility we need to support
From: Rafał Miłecki
Sometimes reading NVMEM cell value involves some data reformatting. it
may require resizing available buffer. Support that.
It's required e.g. to provide properly formatted MAC address in case
it's stored in a non-binary format (e.g. using ASCII).
Signed-off-by: Rafał
From: Rafał Miłecki
U-Boot environment variables can be found of various underlaying storage
entities. This binding should be defined as a layout on top on NVMEM
device not a NVMEM device itself.
Signed-off-by: Rafał Miłecki
Reviewed-by: Rob Herring
---
From: Rafał Miłecki
This is required by layouts that need to read whole NVMEM space. It
applies to NVMEM devices without hardcoded layout (like U-Boot
environment data block).
Signed-off-by: Rafał Miłecki
---
V2: Drop "const" from "const size_t"
---
drivers/nvmem/core.c | 13
Hi Tony,
On 1/27/23 07:13, Tony Dinh wrote:
Hi all,
On Thu, Jan 26, 2023 at 3:38 PM Tony Dinh wrote:
Hi all,
I ran some tests today (Pogo V4 and NSA310S boards) with the latest
master branch and saw the same behavior we've seen before. The boards
hung, and the serial console was silent
On 1/27/23 01:09, Heinrich Schuchardt wrote:
* Use 16 digits on 64 bit systems.
* Use 64 bit patterns on 64 bit systems.
* Expect the sign bit in bit 63 on 64 bit systems.
* Adjust the formatting of a constant.
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Stefan Roese
Thanks,
Stefan
Current U-Boot implements 64-bit boundary for efi_guid_t structure.
It follows the UEFI specification, page 21 of the UEFI Specification v2.10
says about EFI_GUID:
128-bit buffer containing a unique identifier value. Unless
otherwise specified, aligned on a 64-bit boundary.
On the other hand,
Hi Jagan,
On Fri, 27 Jan 2023 at 12:52, Jagan Teki wrote:
>
> This reverts commit f5315dd6290a588434e4f79bfd2886bb7df9210d.
>
> [why]
> TPL is not mandatory for not all Rockchip SoCs, some SoCs like
> RK356x, and RK3588 still use mainline u-boot without TPL as
> their ddr init programs are
Hi Jagan,
On Tue, 17 Jan 2023 at 14:53, Jagan Teki wrote:
>
> Radxa Compute Module 3(CM3) IO board an application board from Radxa
> and is compatible with Raspberry Pi CM4 IO form factor.
>
> Specification:
> - 1x HDMI,
> - 2x MIPI DSI
> - 2x MIPI CSI2
> - 1x eDP
> - 1x PCIe card
> - 2x SATA
>
On 26/01/2023 19:17, Roman Stratiienko wrote:
чт, 26 янв. 2023 г. в 18:05, Safae Ouajih :
Hello everyone,
* This is based on Roman Stratiienko's work to support boot image header
version 3 and 4.
* This supports the new boot image headers v3, v4 and bootconfig feature.
On 27/01/2023 09.41, Christophe Leroy wrote:
>
> Also I have a problem with the following u-boot commit : aa9e891c633
> ("include/linux/stddef.h: avoid 'warning: preprocessor token offsetof
> redefined'")
>
> On uboot mainline I get:
>
...
> What can we do about it ? At least reverting it
On 1/20/23 06:36, Ashok Reddy Soma wrote:
Run and fix sparse warnings in below files
-drivers/mmc/zynq_sdhci.c
-board/xilinx/common/board.h
-drivers/gpio/zynqmp_gpio_modepin.c
-board/xilinx/versal/board.c
Changes in v2:
- Included header file instead of declaring prototype
-
On 1/25/23 08:09, Stefan Roese wrote:
In our system using ZynqMP with an external SGMII PHY it's necessary
to wait for the PCS link and auto negotiation to finish before the xfer
starts. Otherwise the first packet(s) might get dropped, resulting in a
delay at the start of the ethernet
Le 27/01/2023 à 08:43, Rasmus Villemoes a écrit :
> [Vous ne recevez pas souvent de courriers de rasmus.villem...@prevas.dk.
> Découvrez pourquoi ceci est important à
> https://aka.ms/LearnAboutSenderIdentification ]
>
> On 26/01/2023 19.17, Christophe Leroy wrote:
>> When doing a build with
98 matches
Mail list logo