Hi All,
I am trying to enable POST tests on the canyonlands board.I have added
the following to the canyonlands.h header file.
/* POST support */
#define CONFIG_POST (CFG_POST_CACHE | \
CFG_POST_CPU | \
u-boot source
code?
Regards,
Afzal Nadirshah
http://www.mindtree.com/email/disclaimer.html
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
I tried the same. But it still gives the same error.
From: Wolfgang Denk [...@denx.de]
Sent: Monday, February 16, 2009 12:12 PM
To: Afzal Nadirshah
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] tftp not working
Dear Afzal Nadirshah,
In
AC0)
Using ppc_4xx_eth0 device
TFTP from server 172.22.68.33; our IP address is 172.22.68.36
Filename 'u-boot-nand.bin'.
Load address: 0x10
Loading: *
It hangs at this point
Regards,
Afzal Nadirshah
From: Stefan Roese [...@denx.de]
Sent: Monday
From: Stefan Roese [...@denx.de]
Sent: Monday, February 16, 2009 2:45 PM
To: Afzal Nadirshah
Cc: u-boot@lists.denx.de; Wolfgang Denk
Subject: Re: [U-Boot] tftp not working
On Monday 16 February 2009, Afzal Nadirshah wrote:
> I did as suggested by you. I also set the serverip as well as ipaddr. N
Nadirshah
From: Stefan Roese [...@denx.de]
Sent: Monday, February 16, 2009 2:45 PM
To: Afzal Nadirshah
Cc: u-boot@lists.denx.de; Wolfgang Denk
Subject: Re: [U-Boot] tftp not working
On Monday 16 February 2009, Afzal Nadirshah wrote:
> I did as suggested by
Actually she asked me to mail
Regards,
Afzal Nadirshah
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On
Behalf Of u-boot-requ...@lists.denx.de
Sent: Wednesday, February 18, 2009 4:22 PM
To: u-boot@lists.denx.de
Subject: U-Boot Digest, Vol 9
Hi All,
It was a typo. Sorry for the inconvenience caused.
Regards,
Afzal Nadirshah
-Original Message-
From: Wolfgang Denk [mailto:w...@denx.de]
Sent: Wednesday, February 18, 2009 4:31 PM
To: Afzal Nadirshah
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] U-Boot Digest, Vol 9
al
stdout=serial
stderr=serial
ver=U-Boot 2009.01 (Feb 25 2009 - 15:12:15)
bootcmd=run flash_self
bootargs=root=/dev/ram rw ip=canyonlands:eth0:off panic=1
console=ttyS0,115200
filesize=1687BE
Have anybody faced a similar problem?
Regards,
Afzal Nadirshah
http://www.mindtree.com/email
Hi Pieter,
Thanks for your suggestion. I guess its halting at the point where u-boot is
handing over to the Linux kernel image.
For doing the post mortem analysis, I am not able to obtain the address of the
virtual
Regards,
Afzal Nadirshah
-Original Message-
From: Pieter [mailto:phenn
e nay output.
Sorry for the double post.
Regards,
Afzal Nadirshah
-Original Message-
From: Pieter [mailto:phenn...@vastech.co.za]
Sent: Monday, March 02, 2009 4:24 PM
To: Afzal Nadirshah
Subject: Re: [U-Boot] U-Boot hangs after loading device tree
Afzal Nadirshah wrote:
> Hi,
>
-0x0040 : "kernel"
0x0040-0x0180 : "filesystem"
0x0180-0x0200 : "data"
My aim is to add more such partitions on the NAND flash on my board. Any
information regarding partitioning the flash is highly appreciated.
Hi Wolfgang,
Thanks for the suggestions.
I went through some of the documents. I found that the partitions and
their offsets and partition names are provided in the .dts file. I hope I have
understood it right.
Regards,
Afzal Nadirshah
-Original Message-
From
this?
Thanks in advance
Regards,
Afzal Nadirshah
http://www.mindtree.com/email/disclaimer.html
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
does not support writing into
NAND flash. Also from the mailing lists I understand that it is
difficult to execute the u-boot by directly downloading to the
RAM and executing it.
Please guide me on how to approach this.
Thanx in advance.
Thanks & Regards
Afzal Nadir
you please guide me as to where I am going wrong?
Thanks & Regards
Afzal Nadirshah| Senior Engineer | MindTree Ltd. Phase - I, Global Village West
Campus, RVCE post, Mysore Road, Bangalore - 560059 |
Voice +91 80 26264100 Extn: 66759 / Fax +91 80 2671 4000 | email:
afzal_nadirs...@mindtree.c
board.How do I
start the POST.
Thanks in advance.
Regards,
Afzal Nadirshah
http://www.mindtree.com/email/disclaimer.html
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
.
Regards,
Afzal Nadirshah
-Original Message-
From: Stefan Roese [mailto:s...@denx.de]
Sent: Thursday, January 29, 2009 9:17 PM
To: u-boot@lists.denx.de
Cc: Afzal Nadirshah
Subject: Re: [U-Boot] Enabling POST for canyonlands board
Hi Afzal,
On Thursday 29 January 2009, Afzal Nadirshah wrote
Hi,
Can I write simple tests for the RAM on a PPC460 and execute it using the
BDI debugger? If I don't have linux / u-boot up on my board, how can I test the
RAM?
Thanks & Regards
Afzal Nadirshah| Senior Engineer | MindTree Ltd. Phase - I, Global Village West
Campus, RVCE pos
-Cache
Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 16
I2C: ready
DTT: 1 is 47 C
DRAM: 512 MB
Has anybody faced this issue?
Regards,
Afzal Nadirshah
http://www.mindtree.com/email/disclaimer.html
option
make: *** [canyonlands_nand_config] Error 1
These same commands executed inside the u-boot downloaded from the DENX
site, does not give any errors.
Has anybody else such a problem?
Regards,
Afzal Nadirshah
http://www.mindtree.com
Hi Feng,
This is the link from which the Resource CD for the 460EX canyonlands
evaluation kit, was downloaded :
http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=19&ins=33
The u-boot source code was obtained from this CD.
Regards,
Afzal N
22 matches
Mail list logo
