Did you experiment with the "USB Audio tweaks" on the [Tweaks] page?
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=112412
___
Just to wrap this up, I gave up on running the RPi 3B's USB output into
the Bel Canto C5i.
I ended up taking the HiFiBerry Digi+Pro hat off of its RPi 3B and moved
it over to the RPi with the screen and the pCP OS. The Digi+Pro has a
coax feed out into the Bel Canto's DAC. This works perfectly
Prime Heretic wrote:
> Aye cheers, tried that.
>
> I'm no Linux sound expert but I'm wondering if this is showing the issue
> :
>
> [image: https://i.imgur.com/lIqbPRb.png]
>
> >
Code:
> > Subdevices: 0/1
> > :confused:
>
> (I'm running with RP
Aye cheers, tried that.
I'm no Linux sound expert but I'm wondering if this is showing the issue
:
[image: https://i.imgur.com/lIqbPRb.png]
Code:
Subdevices: 0/1
? :confused:
-
Man in a van wrote:
> Does the pCP player connecting via the usb always have content playing
> through it ?
>
> ronnie
Not sure I understand your question. No, I do not have music playing
constantly. I'll have a listening session and then empty the playlist in
LMS and move on to whatever is ne
GoodVibrations wrote:
> I can't find any solution mentioned anywhere by the original poster,
> drmatt.
No harm in asking on that thread. You never know, he may have found a
solution later.
GoodVibrations wrote:
>
> This whole mess has been a disheartening experience.
>
I sympathize. Time spe
Prime Heretic wrote:
> Hi, yes, the -40db bit about thresholds with player at full volume?
>
> [image: https://i.imgur.com/RbAfyTp.png]
>
> Knocking the thresholds up does nothing too.
I purchased this Mersus amp hoping that it would work with the new PcP,
and it did :).
https://www.infineon
mlsstl wrote:
> No, the DAC (part of a Bel Canto C5i integrated amp) stays on all the
> time.
Does the pCP player connecting via the usb always have content playing
through it ?
ronnie
Man in a van's Profile: http://for
GoodVibrations wrote:
> Just discovered this setting:
>
> 30722
>
> This was set to High, and I changed it to Max.
>
> I then rebooted.
> Now it "only" takes 2h18m for the system to become responsive
>
> I'm guessing that it's Trackstat that has become a problem.
> I will now clear the T
mrw wrote:
> Someone else reported problems with Trackstat after upgrading to 7.9.2.
> Perhaps they have solved it.
>
> -Perl 5.28, general dpkg update woes, and a new problem with
> Trackstat?-
> https://forums.slimdevices.com/showthread.php?110560-Perl-5-28-general-dpkg-update-woes-and-a-new-
paul- wrote:
> Is the USB DAC always powered up? If you power cycle the DAC, you will
> need to power cycle pCP. Or get fancy with other scripting.
No, the DAC (part of a Bel Canto C5i integrated amp) stays on all the
time.
---
Is the USB DAC always powered up? If you power cycle the DAC, you will
need to power cycle pCP. Or get fancy with other scripting.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_don
mlsstl wrote:
> The PCP player is on a RPi 3B+. Not sure I want to go to the effort to
> switch out to a RPi 4. I'd note there is no sound quality difference
> between the HiFiBerry Digi+ Pro output and the PCP USB output (when the
> latter is running.) So, it is just a matter of how much I want
paul- wrote:
> Did you follow the Alsa mixer setup as described in the manual? RMA at
> digikey finally responded, and is sending me a new board
Hi, yes, the -40db bit about thresholds?
[image: https://i.imgur.com/RbAfyTp.png]
The PCP player is on a RPi 3B+. Not sure I want to go to the effort to
switch out to a RPi 4. I'd note there is no sound quality difference
between the HiFiBerry Digi+ Pro output and the PCP USB output (when the
latter is running.) So, it is just a matter of how much I want the
visual extras the
Did you follow the Alsa mixer setup as described in the manual? RMA at
digikey finally responded, and is sending me a new board
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donatio
If you are using a rpi4b, try one of the two usb2 sockets
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=112412
Yes, it is a wifi setup for this player.
The LMS PC is hardwired to a gigabit network. The RPi/PCP player has a
wireless connection, but is only about 3 feet from the router. I have no
other devices in the house that have wireless connectivity problems. (I
have a Roku player and a SB Radio at t
Thanks to the PcP team for adding the Merus support!
I tried it today I'm having a bit of trouble getting it working, could
anyone offer any advice?
As far as I can see config should be minimal, select "Merus Audio Amp"
from the devices drop down, then choose one of :
- sysdefault:CARD=s
Are you running wifi? Can you describe your network setup?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abt
The module will be in the 5.4 kernel base. 5.4 has a few big changes,
not sure when it will be ready.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&
GoodVibrations wrote:
>
>
> Trackstat starts refreshing and now the system hangs again!!
> My guess, it will hang for around 2 hours.
>
> My conclusion:
> Trackstat has become useless after 7.9.1.
Someone else reported problems with Trackstat after upgrading to 7.9.2.
Perhaps they have solve
marakasmalan wrote:
>
> I searched the forums, but to no avail. Is there any chance of including
> the libCEC into future builds?
>
paul_ replied to one of my posts to say that the kernel settings would
be made for next big OS update in pCP.
I don't think it is in 6.10
I suspect that once don
Paul Webster wrote:
> I asked about adding HDMI CEC support during the beta cycle but there
> was too much else going on.
>
> I have just noticed that the libCEC people now appear to have added
> support for using the Linux kernel CEC API which might make things
> easier.
>
> They added HAVE_L
Ok. I deleted Trackstat DB.
Rebooted, and LMS was immediately responsive and available!
I then started a scan.
Code:
[20-06-14 12:41:25.3016] Slim::Music::Import::runImporter (511) Starting
Slim::Media::MediaFolderScan scan
.
[20-06-14 12:45:32.0806] Slim::
Just discovered this setting:
30722
This was set to High, and I changed it to Max.
I then rebooted.
Now it "only" takes 2h18m for the system to become responsive
I'm guessing that it's Trackstat that has become a problem.
I will now clear the Trackstat DB and then try a reboot without any
26 matches
Mail list logo
