SoA installed on my Wandboard Dual without incident. My LMS server shows
the new Squeezelite 3 player and it plays. My problem is that
Squeezelite does not show my USB2 DAC in the list of output devices. I
should add that this DAC, a Mytek 192, was also problematic with CSOS on
my other Wandboard,
Installation went fine, but SOA web ui / squeezlite audio output does
not show hw:CARD=usb.
My USB dac is mytek 192
John Marshall
LMS 7.8 running on a DIY PC, Windows 7 64 bit, (1) Transporter, (4)
Booms & (2) CSOS SqueezeliteWands. SqueezePad & iPeng for controllers.
Music Room setup: Transpor
JackOfAll wrote:
> 'mytekusb2' (https://github.com/lintweaker/mytekusb2)
>
> ISTR, last time I asked lintweaker, that although it compiles with
> 3.16/17 kernel, it doesn't actually work. Might have changed now.
>
> Also needed firmware taken from windows driver zip, too.
> 'mytekusb2-firmware-
JackOfAll wrote:
> It needs lintweaker to say definitively. CSOS was using 3.0.35 and the
> driver worked. But ISTR, he told me that there were issues getting this
> working with later versions of the kernel, the last time it came up,
> which I think was one of the piCorePlayer guys asking if it
JackOfAll wrote:
> Yep. That script was in the firmware package. You can use the same
> script on SOA. But first things first. It's not good enough to know
> that the mytekusb2 kernel module builds with your SOA kernel, it
> actually needs to work as well, before spending any time putting
> t
Is there a way to play Pandora? Currently, I sync my Wand or
Picoreplayer to a Squeezebox Boom in my house that is already running
Pandora. I would like to be able to play directly using squeezelite. Is
Pandora One the answer?
TIA,
John
John Marshall
LMS 7.9 running on a DIY PC, Windows 7 64 bi
mherger wrote:
> > Is there a way to play Pandora? Currently, I sync my Wand or
> > Picoreplayer to a Squeezebox Boom in my house that is already running
> > Pandora. I would like to be able to play directly using squeezelite.
> Is
> > Pandora One the answer?
>
> No. We're not allowed to stream
First of all, I want to say what a great player piCorePlayer is. Thanks
Steen et al. Kudos as well to IQaudIO and Hifiberry.
I have three of them running: Pico w/hifiberry digi, pico w/IQaudIO
Dac+, and Pico w/ IQaudIO DAC+/AMP+.
They all work great. Now my question.
In each case of either of the
sbp wrote:
> Hi John.
>
> Thanks for using piCorePlayer.
> Regarding saving the ALSA settings. This is possible and there are two
> things you need to do:
>
> 1. You need to do it like you do it now via putty - change your Alsa
> settings and then when you are back at the command prompt you wri
sbp wrote:
> Sorry about that - could you try: sudo alsactl store
>
> Steen
Thanks again Steen.
Well, still no change in behavior. I used the script above _and_ used
"tweak" to set "custom output", as you had indicated. Then, when I
opened alsamixer, the default pcm page still came up, then I
sbp wrote:
> ...You know that you don't have to do that even with your IQAMP, I think
> the volume still can be controlled via LMS controlling the IQaudIODAC.
>
> Regards
> Steen
Well then, I should just leave it alone. I thought one had to use alsa
directly instead of using LMS to control volu
Squeezed_Rotel wrote:
> Well then, I should just leave it alone. I thought one had to use alsa
> directly instead of using LMS to control volume.
> I messed around with the alsa settings so much, I hope I put them back
> to what I gather is "IQDAC" default.
> 17314
>
sbp wrote:
> Hi John
>
> My setting for the IQaudIO card is like this:
> 17330
>
> Hope this helps
>
> Regards
> Steen
Thanks Steen. Yes, it helps a lot!
John Marshall
LMS 7.9 running on a DIY PC, Windows 7 64 bit, (1) Transporter, (4)
Booms & (2) CSOS SqueezeliteWands, (4) piCorePlayers.
I have tried the script in the IQ instructions, but no luck...i.e.
permission denied or non-existent directory.
-pi@raspberrypi ~ $ echo "22" > /sys/class/gpio/export
pi@raspberrypi ~ $ echo "out" > /sys/class/gpio/gpio22/direction
pi@raspberrypi ~ $ echo "1" > /sys/class/gpio/gpio22/value-
I ev
kolossos4730 wrote:
> Please use the following lines to unmute the Pi-AMP. This worked for me.
> The instructions on the IQaudIO website result in an permission denied
> error.
>
> >
Code:
> > sudo sh -c 'echo "22" > /sys/class/gpio/export'
> sudo sh -c 'echo "out" >
kolossos4730 wrote:
> Squeezed_Rotel,
>
> You could also add a hardware switch to P9 and unmute the Pi-AMP with
> this switch after power-up.
>
> If you have an IQaudIO Pi-DAC an Pi-AMP combination you can take this a
> step further by having the volume slider in
AFAIK, this is Audiophonics newest DAC. I have one and it works fine. My
question is regarding alsamixer integration. Selecting "F6" in the
alsamixer menu displays -*snd_rpi_hifiberry_dac*-, when I select it
however, I get the following message: "THIS SOUND DEVICE DOES NOT HAVE
ANY CONTROLS"
Is t
sbp wrote:
> Hi John
>
> Yes that is as it should be. As far as I know HiFiBerry DACs have not
> developed ALSA controls whereas IQaudIO have these controls.
>
> Regards
> Steen
Thanks Steen
John Marshall
LMS 7.9 running on a DIY PC, Windows 7 64 bit, (1) Transporter, (4)
Booms & (2) CSOS S
sbp wrote:
> Hi Jack
>
> Thanks for the info and it might be different between the DAC and DAC+.
> I'm away from the all the HiFIBerry DACs at the moment, but I tomorrow I
> could have a look.
>
> Steen
Jack and Steen,
FWIW, my inquiry was concerning the new Audiophonics DAC. Are the Berry
and
JackOfAll wrote:
> ...assuming the Audiophonics DAC you speak of, is a Sabre ES9023 based
> DAC, there wont be an Alsa volume control.
Thanks Clive for the update. Tne Audiophonics dac is in fact a ES9023,
so I won't expect control from alsamixer.
Thanks,
John
John Marshall
LMS 7.9 running on
Hi Steen, I have tried loading piCorePlayer version 1.19i_RPi2 for RPi2
from the web gui "update pCP" as well as starting with a fresh image. In
both cases the "Tweaks" tab yields the nasty "404 file not found". Any
thoughts?
TIA
John Marshall
LMS 7.9 running on a DIY PC, Windows 7 64 bit, (1)
DanH wrote:
> I am using version "piCorePlayer v1.19l_RPi2" running usb into a Grant
> Fidelity tubedac-09. In general my music sounds better through the
> picoreplayer than through my squeezebox touch running to the s/pdif
> input. I seem to hear more detail. I have been trying out as many album
Hello all.
I have a new Raspi2 with the new 7 inch display running. The new display
works fine i.e. it displays text like "squeezelite running" etc. I'm
using the 1.21g_rpi2 image.
It plays fine with the attached audiophonics dac. I just can't see or
use any "touch" feature.
I see that in order f
jimzak wrote:
> You just need to connect the player by Ethernet to your router and get
> the IP address.
>
> Then use the IP address in a browser to open up the piCoreplayer page
> for your player.
>
> Then under the advanced tab (bottom of the main page), go to Tweaks and
> enable Jivelite, th
Hello. What does the "quit" button on the Jivelite menu do?
tia,
John
John Marshall
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?userid=30002
View this thread: http://forums.slimdevices.com/showthread
slackhead wrote:
> I'm sure it would - if I had the right leads. The Pi PSU I'm using has
> a fixed lead. Need to find some more USB to micro USB cables.
>
> On that point - anyone know of a good source for short (i.e. 150mm or
> less) USB cables?
I found one possibility
http://shop.cyntech.c
Hello, question for Greg, Steen or Ralphy. I am considering this diy kit
from audiophonics. I already own 2-3 of their DACs and would like to try
this kit.
http://www.audiophonics.fr/fr/dac-diy/audiophonics-raspdac-kit-diy-lecteur-reseau-pour-raspberry-pi-20-dac-p-10511.html#
Question: will pCp su
I have a raspi2 with both Squeezelite v1.21g_RPi2 and Jivelite
installed. I wish to use the -Logitech Squeezebox Boom remote-. I'm
using Flirc v1.3.6 Windows 32/64 gui to program it. I have tried using
the "controllers" profiles that are included in this version;
minimalist, full keyboard, boxee,
kolossos4730 wrote:
> John,
>
> I'm not sure what you are doing exactly, but the normal procedure to
> program the FLIRC is as follows (be sure to erase the configuration
> first):
>
> - Choose full keyboard in the FLIRC program;
> - Click the key you want to program on the virtual keyboard (se
mark wollschlager wrote:
> This one is on backorder, but the only one I can find right now.
> https://www.adafruit.com/products/2033
I have the Pimoroni mentioned here as well. It's a nice piece, but the
legs on the Pimoroni block some access. I found this to be better as far
as room for wiring,
mark wollschlager wrote:
> So far the max2play 7in case seems to fit the bill, for a price...
> http://shop.max2play.com/en/zubehor/raspi-case-93.html
The OP says that he has both a Pi and a DAC. The max2play info is
somewhat sketchy as far as the DAC fitting in propperly, e.g. I don't
see any RC
tjp888 wrote:
> I just wonder how stable it is when using the touch screen (no
> reviews on this at Newegg)?
Well, FWIW, I've been using the Newegg one for a week and it seems
stable.
John Marshall
Squeezed_Rotel's Pr
Hello, I'm running a RPI B+ with piCorePlayer v1.22_RPi and Squeezelite
v1.8-668 installed. All is working fine. When I select Ralphy's ffmpeg
version and save, the pCP main page gui still says "Ralphy's Basic
Version". Is Ralphy's Basic version 1.8-668? What is the version number
for ffmpeg?
I'm
Greg Erskine wrote:
> Hi Squeezed_Rotel,
>
> Yeah, we don't keep track of which version of Squeezelite you have
> loaded in the pulldown. :mad:
>
> I think both versions have the -V option. In [Beta] mode, click on
> [Diagnostics] then look at "[ INFO ] Squeez
Jeff07971 wrote:
> I think you would put it here.
>
> 19662
Thanks Jeff, that's where I've been trying it. Whether I use --V PCM, -v
pcm, -V ,- I do not get the expected behavior. The former
simply gives me 100% volume that cannot be adjusted in LMS or iPend. The
latter two options cause Squeezl
sbp wrote:
> Hi.
> As far as remember the variable was changed for the IQaudIO DAC.
> So please try this: -V Digital
>
> Steen
Well, that does work as I expected / remembered. The -DIGITAL- sliders
seen in the alsamixer settings, do in fact move as one adjusts the
volume in LMS or iPeng. Now, w
ghulse wrote:
> This has probably been addressed before, but is there a way to to use a
> remote with the Picore Player?
I use Flirc https://flirc.tv/more/flirc-usb
John Marshall
Squeezed_Rotel's Profile: http://forums.sl
Thanks Steen, Greg, Ralphy and Kolossos. I have pCp 2.0 up and running
on my 7" touch with iQaudIO dac. It sounds and looks great!
One question: one of the Jivelite screen settings is -date and time
format-. Does this mean that there is or will be a clock applet?
John
John Marshall
At the risk of cross posting (I posted this in pCp 2.0 thread), I ask my
question here because it is a Jivelite setting, and not a pCp 2.0
setting per se.
My is question as follows; one of the Jivelite screen settings is *-date
and time format-*. Does this mean that there is or will be a clock
scr
tcutting wrote:
> In trying to get CustomClock to work for JiveLite, I found I had to
> disable the CustomSpectrumMeter and CustomVUMeter functions since they
> require "squeezeplay.decode". Is there an equivalent function under
> PiCorePlayer/Jivelite/Squeezelite? I imagine you use something s
Hello Steen et al.
The newest pCP v2.00 uses linux 4.1.13-piCore_v7+. Does this mean that
you have the HiFIBerry DAC+ Pro clocks driver included? I ask because
the audio output menu drop down in Squeezelite settings, shows
-HiFIBerry DAC+-, but not "Pro".
TIA
John
John Marshall
JackOfAll wrote:
> John, ISTR that the Berry driver was updated (to detect Pro with clocks)
> in October. 4.1.13 update was November, so 4.1.13 should be good to
> go.
>
> I think, if you want to see whether clocks are detected and being used,
> rather than BCLK generated from Pi clock... "c
JackOfAll wrote:
> Nothing in dmesg about "No SCLK, using BCLK" and "Pro" in that ID
> string.. IMHO, you have a Pro board with clocks and they are being
> used, and whatever piCore version you are using, it has the Pro driver
> update.
JackOfAll wrote:
> And, for comparison, here is output
I use the alarm feature on my SB Booms. If I set an alarm for the Boom
in LMS, the server wakes up about 10 minutes before the alarm is
scheduled to go on, and the boom alarm sounds as scheduled. My pCP alarm
works *but only* if LMS is running. If LMS server is sleeping, no alarm.
Is there a trick
Mnyb wrote:
> Does WOL work in general with this player ? The original squeezeboxes
> has the feature to send WOL packets to the server in varius scenarios
> not only before an alarm . Pressing "on" on a boom sends WOL touching
> the screen on Touch does it etc "on" on the IR remote of sb3 ...
>
I have ALSA EQ working on my Hifiberry DAC+ Pro, but it won't install on
my IQAudio Amp+. The result is RED = Squeezelite not running. Any
thoughts?
John
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?u
sbp wrote:
> I Think we have a problem somewhere in the Logic when enabling alsa
> equalizer.
> So I think that success with alsa equalizer depends upon the order you
> customize pCP with audio dac and alsa equalizer.
> In order for alsa equalizer to work the output on the squeezelite page
> sh
1989519896
+---+
|Filename: Picture2.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=19896|
+---+
sbp wrote:
> Hi I think I know what the problem is. But before you fix it could you
> please have a look at your file "etc/asound.conf"
> >
Code:
> > #---ALSA EQ Belowctl.equal {
> type equal;
> controls "/home/tc/.alsaequal.bin"
> library "/usr/local/lib/l
19897
+---+
|Filename: Picture4.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=19897|
+---+
Jo
sbp wrote:
> From your screenshots it seems like you have a problem with the
> installation of ALSA equalizer.
>
> Just skip the etc/asound.conf question. Try to follow the recipe - I'm
> right now listening to my IQuadIO Digi AMP with ALSA equalizer so it is
> possible :-)
I have tried the se
sbp wrote:
> OK from here it seems like you have alsa eq downloaded.
> Is Squeezelite still not running?
I downgraded to pCP 2.0, then upgraded to 2.01, set output device to
IQaudIO PI digi AMP+, boot, Alsa eq to yes, boot and configure!
19899
+
sbp wrote:
> Good, so I hope you have it working now?
I may be using it incorrectly. I have my Klipsch IEM headphones plugged
into the IQ dac+ onboard headphone amp. I don't hear any difference when
I move the sliders/test/resetno audible changes?:confused:
John
--
Greg Erskine wrote:
> hi ghulse,
>
> I use a RPi with LMS and a USB disk, so I don't have NAS
> recommendation.
>
> If I had a NAS, I would still have LMS on a RPi, and simply access the
> music files on the NAS.
>
> regards
> Greg
Hello Greg, may I ask how, you as you said, have LMS on the R
Greg Erskine wrote:
> Another promising solution is LSM on piCore found here
> http://forum.tinycorelinux.net/index.php/topic,19440.0.html
>
> regards
> Greg
Wow Greg! That is great news.
John
Squeezed_Rotel's Profile:
Greg Erskine wrote:
> Hi guys,
>
> I need some information from people running either of these two I2S
> DACs.
>
> 1. RPI-DAC
> 2. RaspiDAC V3
>
> Could you please post the output for "aplay -l"
>
> thanks
>
> Greg
Greg, I have what I believe is a RPI-DAC, now called Duriosound Pro, and
sol
Greg Erskine wrote:
> ...If you feel confident in using vi and have some time, can you try
> this and post the results again. What I am looking for is the name of
> card 1 when using the RPI-DAC driver.
>
> >
Code:
> > $ cd
> $ m1
> $ c1
> $ vicfg
>
> Do thes
This a.m., I attempted to upgrade some of my pCP 2.00 playes insitu. I
tried to upgrade 4 different players. 3 were 2.00 and one was 1.18. All
attempts produced the same error.
-[ INFO ] You are currently using version: piCorePlayer2.00
[ INFO ] Downloading insitu.cfg...
[ ERROR: 1 ] Error down
Greg Erskine wrote:
> Hi testers,
>
> We have a "simple" 15 step procedure to fix the sourceforge download
> issues for piCorePlayer 2.00 and 2.01. :o
>
> If anyone is feeling adventuresome you might want to try this procedure.
> Please assume all the normal warning about using "beta" software.
sbp wrote:
> Hi, what do you mean?
> Can't you download alsa equalizer, or what is the problem?
[ INFO ] ALSAeq is set to: yes
[ INFO ] ALSA equalizer: yes
[ INFO ] Downloading Alsaequalizer from repository...
[ INFO ] Download will take a few minutes. Please wait...
[ ERROR ] Alsaequalizer
sbp wrote:
> it has nothing to do with using a IQaudIO, I think you simply are
> running out of space. So please try to use all of your sad card before
> installing alsa equalizer.
> go to the main page, select "beta tab " and then select "resize FS" this
> will reboot pCP a couple of times and w
sbp wrote:
> This is Strange as i have it running on the same hardware.
>
> Could it be the issue that Greg described: after using the fix and
> update to 2.01, the sourceforge problem will reappear. So you will have
> to apply the fix to the 2.01 pCP in order to be able to download alsa
> equal
Greg Erskine wrote:
> hi Squeezed_Rotel,
>
> I think it is just a matter with the order you did things. It will be a
> little more robust in pCP2.02.
>
> Ensure Squeezelite Settings -> Output setting is set to "equal"
>
> ALSA equalizer has worked for ever
Greg Erskine wrote:
> Yes. :D
Thanks again Greg. BTW, -Output setting- set to "equal", but -various
input- can't be -V Digital. I had to leave it blank.
John
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.
Insitu upgrade successful, but -V Digital seems to be incompatible with
the alsa eq setting. My IQaudIO dac (using -V Digital) goes to 100%
volume as soon as the eq is applied.
Just an FYI, not a complaint. You guys are great!
John
---
Greg Erskine wrote:
> Hi Squeezed_Rotel,
>
> What is the output of this command?
>
> >
Code:
> > pi@raspberrypi:/boot $ amixer scontrols
> Simple mixer control 'PCM',0
>
> >
>
> regards
Greg Erskine wrote:
> hi Squeezed_Rotel,
>
> Sorry I wasn't clear enough.
>
> The command is just "amixer scontrols".
>
> I showed the output of the command when I ran it on my piCorePlayer
> "Simple mixer control 'PCM',0"
&g
Greg Erskine wrote:
> hi Squeezed_Rotel,
>
> I work from a Windows machine, when you highlight text on a putty window
> using the mouse left button the highlighted text is automatically put
> into the paste buffer. In the putty window the right mouse button is
> paste opera
Code:
Thanks!
John
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?userid=30002
View this thread: http://forums.slimdevices.com/showthread.php?t=105018
Hello, when I try to do a backup from the main page, I get this:
Code:
[ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz/-\|/-\|
Done.
[ OK ] Backup successful.
[ WARN ] Backup is too big - 300345 bytes
I have already "resize
Greg Erskine wrote:
> Hi Squeezed_Rotel and kolossos4730,
>
> If you guys could look at what is in your backup and lets us know if it
> is just normal stuff, or have you been adding stuff to your home
> directory?
>
> In [Beta] mode, click on [Diagnostics ]and scroll down
Greg Erskine wrote:
> hi John,
>
> hmm it must be the jivelite stuff.
>
> Are those custom clock images really images or are just http links?
>
> regards
> Greg
I wish I could answer that, as I said earlier...I loaded nothing on my
own that was not already in LMS plugins or pCP applets etc.
Sequoia49 wrote:
> I am trying to use the smaller remote that came with my older Boom. The
> default templates provided with the software do not have all of the
> buttons on my remote. Just received the Flirc last night, need to do
> more research on what works and what dosn't.
> Thanks
I would l
ctbarker32 wrote:
> In case you missed the news. WD is selling a Pi optimized (e.g low
> power) 314 gb hard drive for a special price through the end of March.
>
> http://wdlabs.wd.com/products/wd-pidrive-314gb/
>
> I ordered one to potentially use as the data store to the eventual LMS
> additi
sbp wrote:
> PLEASE TRY THE NEW VERSION PICOREPLAYER 2.03.
>
> *Great news. *Paul from the Tinycore and Logitech forum have joined the
> team. Thanks to him LMS (Logitech Media Server) can now be installed and
> run on your piCorePlayer.
>
> This means that pCP now can be used as:
>
> > >
LMS installed using pCP 2.03. So far, everything works. On minor issue
remains.
Code:
[16-03-20 15:02:51.7596 Slim::bootstrap::tryModuleLoad (286) Warning:
Module [Plugins::SuperDateTime::Plugin] failed to load:]
What can I do to fix?
John
paul- wrote:
> It was impossible for us to test every custom "Plugin" that is offered
> in LMS. More than likely, that module has a perl module dependancy that
> is not included.
>
> What is the name of the Plugin and repo, and I'll check it out.
Thanks Paul. The plugin name is: SuperDate Time
paul- wrote:
> It appears to be a incompatibility with Perl5.22. Check your PM
Thank you Paul.
John
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?userid=30002
View this thread: http://forums.slimdev
tcutting wrote:
> A similar error was identified on another thread. I suspect the version
> of PERL is incompatible with something in SDT. I've been tied up this
> weekend so haven't had time to investigate further. I'll try to check
> the plugin in the next few days.
>
> Sent from my HTC6525LVW
paul- wrote:
> We needed a starting point. A USB stick was the entry point for music
> storage for the first testing/release. ext3/4 and Dos partitions are
> supported directly in the Kernel. All other file systems require a
> different extension. If you are not using a USB stick formatte
paul- wrote:
> It should work as a native USB drive. It should show up as /dev/sda1
> (If you only have one USB drive plugged in). You may want to change
> the format of the drive.
> Since pCP loads the root fs into ram, I would keep pCP running from the
> SDcard, and just use the hard dr
tcutting wrote:
> For those with this problem, I've created a "beta" version to try.
> For this beta version, please add the following repository to your
> plugins screen in LMS:
> "http://superdatetimewu.sourceforge.net/test_repo.xml";
>
> You should then be able to let the installer install SD
Squeezed_Rotel wrote:
> Thanks tcutting. Plugin enabled fine, plugin settings WU, moon etc. work
> as before.
> Thanks for supporting SDT on the new pCP LMS integration.
Spoke too soon. SDT plugin enabled without a problem, but the fields are
not populated with data. I have the c
tcutting wrote:
> Can you post your LMS server log? Best if you restart LMS and let run
> for about 10 minutes before capturing log. Would be good if logging for
> SDT set to debug.
>
> Sent from my HTC6525LVW using Tapatalk
All set now, I neglected to enable "license manager" in LMS. Only mino
tcutting wrote:
> You will have to re-import the Roman Clock from the posted text file.
>
> Sent from my HTC6525LVW using Tapatalk
Got it, thanks.
John
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?u
I have two LMS servers in the house. One of them is a pCP 2.03 player
with LMS installed. How can I force this player to use it's own LMS at
boot up, and not my other server?
John
Squeezed_Rotel's Profile: http://forums.sl
paul- wrote:
> That's something we want to figure out a easy way to do it. Try using
> the LMS IP field on the squeezelite page. Squeezelite is starting in
> pCP before LMS does, so it may give up trying to connect and just
> fallback to a broadcast server search.
Thank you so much Paul. I k
I am using a 64g micro sd. When I back up, the result is backup too big.
I think I caused this by using both the backup utility on the web gui,
as well as the pCP applet called backup to SD card. I think I now have
two backups.
Is ther a way too delete all backups and start over?
Code:
More detail on above post
Code:
[ INFO ] Backing up files to
/mnt/mmcblk0p2/tce/mydata.tgz/-\|/-\|/-\|/-\|/-
Done.
[ OK ] Backup successful.
[ WARN ] Your backup is a little large - 1064133 bytes.
[ INFO ] Be careful adding large files to /home
tcutting wrote:
> I think the message about the backup being big is a warning. One reason
> is CustomClock caches the images, and these take up a fair amount of
> space. I haven't seen issues on my setup - I get same warning.
>
> Sent from my HTC6525LVW using Tapatalk
No issues yet here either,
USB drive does not appear in sda1 drop down list. My USB stick does, but
my WD Passport doesn't. Any ideas?
pCP 2.03
John
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?userid=30002
View this thread: ht
sbp wrote:
> You probably need to mount the disk before it can be seen by LMS.
> Steen
I'm not sure what this means or how to mount the disk, I am not versed
in Linux. Is there a script or code? I know how to SSH into my pCP, will
this help.
John
---
paul- wrote:
> Not yet. But it is being worked on. The easiest thing to do is to
> use a Large sd card and put pCP and your music on the same card. A
> Large USB stick should work as /dev/sda1, but I know there are some
> issues with pCP dismounting /dev/sda1.
Thanks Paul, I do use a USB st
feeder6 wrote:
> Hey guys, i have a problem with jivelite. I am running picoreplayer 2.03
> with LMS on SD card. Touchscreen 7". The problem is that the Tunein App
> does not shows in the jivelite Menü. Yesterday it works fine but today
> it is gone.
Just a thought...Perhaps you can check LMS/se
feeder6 wrote:
> Okay the field is empty. But which name is username? I don't have a
> tunein account. Yesterday it works fine.
I see from the My Squeezebox.com web page, under "apps" that tunein
requires a "free account" from tunein.com
John
---
paul- wrote:
> It should be noted that with adding diskmount options to pCP, our team
> has done quite a bit of testing of attaching hard disks/usb sticks to
> various rpi Boards.
>
> If you are seeing missing partitions, or getting SD card errors or
> corruption. Then you seriously need to in
Hello. I originally posted this issue or question in the LMS section of
the forum, but this might be pCP related, not LMS.
The "My Apps" page using pCP, has problem with the curious suffix in the
app name. Both examples (see below), are using the latest nightly
Version: 7.9.0 - 1463124735. The Win
paul- wrote:
> Unless I missed one in the middle, the log messages are just because you
> don't have a music database setup. There are several restarts in the
> log too. Do you have any local music, or are you streaming everything
> from online resources?
Hello paul, thanks for checking the l
paul- wrote:
> I can confirm I get the same thing.I've enabled squeezenetwork
> logging.
>
> Not sure where to go from here. Probably need Michael to chime in.
Thanks paul for confirming this issue.
John
Squeezed
Now that the Raspi 3 along with pCP 2.05 are here, and LMS can be
installed, what are the pros and cons for using this feature? "-Save LMS
Server Cache and Preferences to Mounted Drive"-
John
Squeezed_Rotel's Profile: http
1 - 100 of 172 matches
Mail list logo
