It also depends in UI from where we are creating guest network. If you are
trying to create guest network from Networks tab, you will only see Network
offerings which has SourceNat true.
Whereas creating network from Infrastructure->Zone->PhysicalNetwork->guest
shows shared network offerings.
-
On 14.08.2013 13:28, Sanjeev Neelarapu wrote:
It also depends in UI from where we are creating guest network. If
you are trying to create guest network from Networks tab, you will
only see Network offerings which has SourceNat true.
Whereas creating network from
Infrastructure->Zone->PhysicalNetw
HI
I'm using cloudstack 4.0.2.
I have created service offering for SSVM and Console proxy system VMs. I want
to use those service offerings to start the system VMs. So I set the
consoleproxy.service.offering and secstorage.service.offering to their
respective IDs.
What I have done is correct o
Thank you for your replies, I will try to answer them all.
Marty - I can ping the public address of CPVM. Will attach logs/configs
Kelven - all commands return as running/listening, can ping public from
outside.
David - DNS seems to be working fine, but im not sure how to check further
into this
Hi Chitra,
This should be fine, depending on the hypervisor you can check if the
service offering is being followed by looking at the process table: ps aux
There is typically a long command for each VM which will define the spec of
the VM, at least for KVM.
If you have any issues, restart the man
Daan,
Yes, static nat was enabled for theese vms. I disabled static nat and vms
were successfully expunged.
Looks like a bug.
On Thu, Aug 1, 2013 at 4:27 PM, Daan Hoogland
wrote:
> Valery,
>
> Do you still have assigned ip addresses to the vms?
>
> Regards,
>
> -Original Message-
> From:
Guess so,
please enter it at issues.apache...
thanks,
Daan
On Wed, Aug 14, 2013 at 5:27 PM, Valery Ciareszka
wrote:
> Daan,
>
> Yes, static nat was enabled for theese vms. I disabled static nat and vms
> were successfully expunged.
> Looks like a bug.
>
> On Thu, Aug 1, 2013 at 4:27 PM, Daan Ho
Infact It would be nice to see the service offering the system vms are
using in the UI itself. If not already present, could you please raise an
improvement for this ?
On 14/08/13 8:31 PM, "Marty Sweet" wrote:
>Hi Chitra,
>
>This should be fine, depending on the hypervisor you can check if the
>
vhd-util is only for xenserver i believe... Maybe XCP. Wont affect vmware
or kvm.
On Tue, Aug 13, 2013 at 10:11 PM, Chitra Manjunath <
[email protected]> wrote:
> Hi All,
>
> I'm using cloud stack 4.0.2,Vmware vsphere 5.1 hypervisor.
> I copied the Vhd-util to
> /usr/lib64/cloud/comm
ssh into CPVM. check CPVM log file at /var/log/cloud/cloud.log, or perform more
testing
telnet 192.168.1.202 5901 -> test connectivity from CPVM to your KVM host
If it does not work, check your KVM iptables rules, if it does connect, please
check if your public network subnet is the same with
Quick question regarding vSphere and vCenter. I have a customer that is running
version 5.1, however the documentation says 5.0 at the newest. Is 5.1 do-able?
Has any one tested with 5.1 with any success?
Thanks!
Hi kelven,
didnt notice anything useful in cloud.log. I am able to telnet from CPVM
into the host, they are in the same subnet and i disabled rpfilter but
still no luck.
might try re-starting from scratch, or maybe using something other then
centos
Thanks,
Andrew
On Wed, Aug 14, 2013 at 1:11 P
Kirk,
What do you mean by "- run the command to add it".
Also when you say master server, do you management server, or do you mean
the xenserver node?
On Tue, Aug 13, 2013 at 8:09 PM, Kirk Jantzer wrote:
> In my experience, yes, it has to do with your secondary storage and the
> system templat
http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/management-server-install-flow.html#prepare-system-vm-template
management server
Regards,
Kirk Jantzer
http://about.met/kirkjantzer
On Wed, Aug 14, 2013 at 3:02 PM, Tracy Phillips wrote:
> Kirk,
>
> What
I am re-installing a cluster with CS 4.1.1 and XS6.1.
I'm pretty sure I've read somewhere that CS4.1 added support for XS6.1 but
the CS installation docs don't mention XS6.1 (
http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.0/html/Installation_Guide/citrix-xenserver-installation.html
I have 5.1 running with CS in our lab with no issue.
Steve Searles
Director, Network Operations
Zimcom Internet Solutions, Inc.
http://www.zimcom.net
Phone. (513)231-9500
Fax. (513)624-3909
Toll Free. (888)624-3910
On Aug 14, 2013, at 2:25 PM, John Skinner
wrote:
> Quick question regarding vS
http://www.slideshare.net/ShapeBlue/cloud-stack-networking-shapeblue-techni
cal-deep-dive
On 8/13/13 10:32 PM, "Mark van der Meulen" wrote:
>Does anyone have links to a more comprehensive design or implementation
>guide?
>
>Doco is vague at best, and that slideshow is hardly helpful when it co
If they are in the same net, you need to disable rpfilter in order to make
it work.
Kelven
On 8/14/13 11:57 AM, "Andrew V" wrote:
>Hi kelven,
>
>didnt notice anything useful in cloud.log. I am able to telnet from CPVM
>into the host, they are in the same subnet and i disabled rpfilter but
>stil
I was able to create a new network using the API. Its definitely only
an issue in the UI. The button is missing.
--
Dave Cundiff
System Administrator
A2Hosting, Inc
http://www.a2hosting.com
On Tue, Aug 13, 2013 at 3:26 AM, Venkata SwamyBabu Budumuru
wrote:
>
> It could be an issue with UI? Did
ok here is my problem. I have a setup with two hosts. Which also serve as NFS
file storage system for primary and secondary. A day ago someone accidentally
rebooted one of the hosts. Since then I am having all sorts of issues starting
up the system VMs. After destroying the existing ssvm and cpv
Hi Mir,
If you are running 4.1.1 go to Infrastructure > Virtual Routers and simply
destroy it, start a user VM and a new one will be created.
I occasionally have this problem when an mishap like yours happens.
Guest VMs will only start if the management server can communicate with the
virtual rou
Thank you, the solution to my System VM problems was putting vhd-util in
/usr/bin and /opt/xensource/bin.
After putting vhd-util in both places AND setting permissions with chmod +x
then my system vm's showed up in my Infrastructure tab.
Thanks!
Kent Johnson
University of Utah
MSIS Graduate Stu
I would like to help you but I haven't worked much with the router VM yet. I
believe the mailing list will tell you the default password. I am also
interested in the answer to your question since I do not know the answer.
Best,
Kent Johnson
-Original Message-
From: Mir Islam [mailto:mi
Thanks I am running 4.1 and whenever I went to Virtual router page it showed as
"starting" so I could not destroy it like I did with the other system VMs. But
it finally got into "stopped" state and I was able to destroy it. However, I do
not see it getting recreated. And in the infrastructure I
if the vm isnt running, you can quickly update the state of the vm in the
db table 'vm_instance' set that to 'Stopped' then from the UI you should be
able to destroy it.
On Wed, Aug 14, 2013 at 3:59 PM, Mir Islam wrote:
> Thanks I am running 4.1 and whenever I went to Virtual router page it
> s
CloudStack won't automatically create a new virtual router to replace a
destroyed one. To force CS to recreate one you need to start a new or
existing VM in the network. This is what Marty meant by "start a user
VM" in his steps.
The next time you want CS to destroy and recreate a virtual router
Hi All,
The Cloudstack docs for XenServer say to use bridge networking when using
basic networking. Is this still the case with CS 4.1 and XS 6.1?
XS 6.1 introduced LACP which I would prefer to use but it is not supported
with bridge networking. I think my storage network would benefit from it.
Thanks for the update, I'm glad to hear it is resolved.
Best regards,
Kirk
On 08/14/2013 05:57 PM, Mir Islam wrote:
> Thanks Kirk for the detailed instructions. Yes I did misread what Marty
> mentioned before. Now the router vm is up and I can restart my old vms.
>
> Best regards
> Mir
> On Aug
Thanks, Hari. I have added your comments to the doc bug for now and will
update the doc asap.
Jessica T.
On Thu, Aug 8, 2013 at 11:16 PM, Harikrishna Patnala <
[email protected]> wrote:
> Hi Jessica,
> Thanks for the doc and it looks fine. Some minor changes required,
>
> The new t
Since no comments have been made against this doc, I am resolving the bug.
Jessica T.
On Thu, Aug 8, 2013 at 11:16 PM, Jessica Tomechak <
[email protected]> wrote:
> Hi,
> New doc on resetting VM on reboot is ready for review. You can view the
> updated text at the link below. This is
We didn't get enough response from people with Cool Clouds to show off in
this video, so we have shelved it for now, at least for myself and Gregg's
part. If some other person would like to step forward and take up the idea,
of course, that would be great! Thanks to everyone who did respond to our
I see an open issue on Jira on creating a wizard to import OVF file as
template. But could not find any information on howto do so even manually. Here
is what I have tried so far.
1. Unzipped the ovf file
2. Convert the vmdk file to a qcow2 image
3. Install it as template
4. Boot from it.
Howev
XenServer 6.1 / XCP 1.6 comes with the RPMs needed for Security Groups, but
you need to edit a config file to make them work. Follow this JIRA issue or
discussion:
https://issues.apache.org/jira/browse/CLOUDSTACK-2702
http://markmail.org/thread/57pc3de5dzma6a37
Unfortunately, instructions for the
Currently CS supports security groups functionality only with bridge
networking mode.
If you are ok with out security groups then with advanced shared you will
be able to achieve what you are looking for. Advanced shared expects
tagged VLANs for guest and public traffic types.
On 15/08/13 5:35 A
Hi all,
Do you have any solution to implement monitoring feature for CS?
Jerry Jiang
Hi All,
The docs (installguide, adminguide, release notes) leading up to the
Apache CloudStack 4.2 release will keep building on jenkins [1] [2]
[3] as they are written/fixed/corrected. Please review them to help
fix doc errors. Our tech writing team is very busy working towards
bettering our docs
36 matches
Mail list logo
