Hi!
I can not connect the kannel to siemens-tc35.
I got always hardware handshake error.
Here is my configure file:
+++ kannel.conf ##
group = smsc
smsc = at2
smsc-id = siemens-tc35
modemtype = siemens-tc35
device = /dev/ttyS0
speed = 19200
pin = 5xxx
include =
-Original Message-
From: Avner Sternheim [mailto:[EMAIL PROTECTED]]
I'm using siemens m20,
can you recommend another modem , cause I saw on the Kannel
user guide that
this modem has few bugs
That information is not correct, it resulted from testing with a bad modem, and its
Peter Löfman wrote:
Hi,
does anyone know the parameters to put in ota XML document to use
connectionless mode for wap?
Appearently that is needed to get the T68i to work.
BR Peter Lofman
Hi,
Same problem, here. Did you find any doc describing parameters?
BR,
--
David
anybody know where can I know the number of the
parameter sms-center in my kannel configure file for
smsc group?
__
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
Thanks for your help
I have all these four items installed,but still get the dependency
errors.
I also tried reinstalling redhat 7.3, incase something got missed,
but still get dependency errors.
Anybody else got any clues.
Richard
you should probably install
rpm -ivh
Hi,
I'm using Kannel-1.0.3-1 on RH7.3
box.
--- kannel.conf---
group = smscsmsc = atsmsc-id =
mobteldenied-smsc-id = telekommodemtype = wavecomdevice =
/dev/gsm
group = smsboxbearerbox-host =
127.0.0.1sendsms-port = 13013global-sender = "+3816543210"log-file =
Hi,
Have checked and I have version
openssl-0.9.6b-28 and openssl-devel-0.9.6b-28.
and still get this
libcrypto.so.0.9.6 and
libssl.so.0.9.6 needed by kennel-1.2.01
Have been trying all day (and up to 11pm tonight)!
Any more clues.
I have tried to find a latter version of this libraries,
I can not connect the kannel to siemens-tc35.
I got always hardware handshake error.
Here is my configure file:
+++ kannel.conf ##
group = smsc
smsc = at2
smsc-id = siemens-tc35
modemtype = siemens-tc35
device = /dev/ttyS0
speed = 19200
pin = 5xxx
include =
Your dependancy problem is due to a mismatch between the 'requires' name in the
requiring package and the 'provides' name in the providing package. if you sure that
you have all the requirements met, then you can simply install using --nodeps and be
done with it.
I think this has already
-Original Message-From: Cvijanovic Vladimir
[mailto:[EMAIL PROTECTED]]
Is the any way to correctly encode '@'
sign whensending sms?!
I see it like inverted exclamation
mark'¡'
Yes - please encode the '@' sign according to
the URL encoding rules as clearly stated in
-Original Message-
From: Richard Kingsley [mailto:[EMAIL PROTECTED]]
Have checked and I have version
openssl-0.9.6b-28 and openssl-devel-0.9.6b-28.
I have tried to find a latter version of this libraries, but
cannot find
(except on www.openssl.org but these are source files
By the way, there is a security bug (buffer overflow) in the openssl please
install its new update:
for redhat 7.1 i386 its name is:
openssl-0.9.6-13.i386.rpm
openssl-devel-0.9.6-13.i386.rpm
good luck,
At 14:35 09.09.2002, Oded Arbel wrote:
-Original Message-
From: Richard
you have an error 0x03 - invalid system ID.
I think you need to check system ID (smsc-username in kannel.conf) with your provider,
may be misspeling or upper/low case.
-Original Message-
From: eddie [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 04, 2002 1:52 AM
To: [EMAIL
hi,
G L [EMAIL PROTECTED] schrieb am 09.09.02 12:37:46:
anybody know where can I know the number of the
parameter sms-center in my kannel configure file for
smsc group?
You get this information from the provider of your GSM-Network. If you have got a
mobile for your SIM-Card, you can
Hi!
I try to start the kannel with TC35 but I got
following log:
2002-09-09 16:12:21 [0] INFO: Kannel bearerbox II
version 1.2.0 starting
2002-09-09 16:12:21 [0] INFO: SSL not supported, no
SSL initialization done.
2002-09-09 16:12:21 [0] DEBUG: HTTP: Opening server at
port 13000.
2002-09-09
Antwort auf Mail von Richard Kingsley vom 31.08.2002 19:27:55:
Hi,
Thanks for your help
I have all these four items installed,but still get the dependency
errors.
I also tried reinstalling redhat 7.3, incase something got missed,
but still get dependency errors.
Anybody else got any clues.
hi,
i was thinking of setting up an sms gateway the would probably maximize my
hardware...
i have some minor questions in mind..
i read the user manual and read the bearerbox part.. (i think its page
25) it says there that bearerbox needs the core group part i was just
17 matches
Mail list logo