There's a seperate clickatell driver built-in in Kannel already.
You will get it when you set system-type = clickatell.
Not sure if that will solve your problem. But it's worth a try.
== Rene
From: users-boun...@vm1.kannel.org [mailto:users-boun...@vm1.kannel.org] On
Beha
Dear all,
I am connected to Clickatell using Kannel HTTP connection, and when We try
to send Multi-part none English SMS it don't work, In English SMSs, whether
short or long(multi-part) they work, In Arabic, only short ones work.
Multi-parts don't.
They said We should add &qu
On 9/19/2011 1:37 AM, Willy Mularto wrote:
Kannel does have direct clickatell API on it's source code. But I'm not whether
it uses the latest API from clickatell or not. You probably need to check it
yourself.
On Sep 19, 2011, at 1:28 PM, Mpeirwe Benjamin wrote:
Hi Alvin,
How
Kannel does have direct clickatell API on it's source code. But I'm not whether
it uses the latest API from clickatell or not. You probably need to check it
yourself.
On Sep 19, 2011, at 1:28 PM, Mpeirwe Benjamin wrote:
> Hi Alvin,
>
> How about you try PlaySMS? it has
Alvin,
In general I do not get why you need Kannel when you use Clickatell. That might
be because i do not know your application but it feels as Kannel might not be
the right choice for you application.
Best,
Erik
http://www.sundelof.com
On Sunday, September 18, 2011 at 11:28 PM
Hi Alvin,
How about you try PlaySMS? it has a direct clickatell Connection
interface that I guess will save you alot of headache!
On 9/19/11, Alvin wrote:
> Hi, this is Alvin again and you may remember the last message I sent
> asking about how to set up the SMS gateway to wor
oing wrong and/or provide me a sample
/"conf/" file that works with Clickatell? Thanks!
group = smsc
smsc = http
smsc-id = clickatell
system-id = #api_id
system-type = clickatell
smsc-username = #clickatell username
smsc-password = #clickatel pass
send-url = "http:
Original Message
Subject:Help in setting up SMS gateway with Clickatell
Date: Tue, 13 Sep 2011 16:42:49 -0500
From: Alvin Kuo
To: de...@kannel.org, users@kannel.org
Hi I am trying to integrate a SMS gateway with my application in an
Amazon EC2 instance
Hi I am trying to integrate a SMS gateway with my application in an Amazon
EC2 instance (Ubuntu Linux), and I downloaded, installed, and configured the
conf file associated with Kannel. What I am trying to achieve is to have
Kannel work with Clickatell to receive and send SMS's, and how it
a+activar+a+nova+aplice.&
coding=2&charset=UTF-8&smsc=clickatell
Thanks,
Alexander Malysh
Am 18.03.2011 um 17:13 schrieb Hillel:
> Hi,
>
> Our message is:
> Mr. João Seu seguro automóvel MM3A308720 caduca hoje. Contacte-nos
> 227280210/220 ou visite-nos numa de no
Hi,
Our message is:
Mr. João Seu seguro automóvel MM3A308720 caduca hoje. Contacte-nos
227280210/220 ou visite-nos numa de nossas agências para activar a nova
apólice. (147 characters)
Our goal is to send it as concatenated Unicode and use UTF-8 as that is what
Clickatell accepts.
Questions
@kannel.org
Subject: Re: DLR Callback Unexpected Error with Clickatell
I think you are mixing things
...cgi-bin/sendsms is for sending MT messages therefore it needs a
minimal set of arguments to send the MT or SMS Messages. At least
destination number and message, in its own format as per the user
I think you are mixing things
...cgi-bin/sendsms is for sending MT messages therefore it needs a
minimal set of arguments to send the MT or SMS Messages. At least
destination number and message, in its own format as per the user
guide.
the dlr-url that clickatell needs to call is an script of
Hi everyone,
We had a problem to set the dlr callback URL using Clicktell portal for a
new user account yesterday.
I was not able to set the Delivery URL in the configuration Clickatell using
their web site for a new account. When setting the value of the "Enable SMS
Status Notificatio
>>
>> Hi,
>>
>> Before starting the configuration work, I just wanted to know whether
>> someone has configured Kannel SMPP gateway with Clickatell, whose API
>> acknolidges compliance with SMPP version 3.4.
>>
>> Regards,
>> Gjergji
>>
>
>
hing you'd expect to find in any
case).
Regards,
Alex
On Fri, Aug 20, 2010 at 5:37 PM, Gjergji Guri wrote:
> Hi,
>
> Before starting the configuration work, I just wanted to know whether
> someone has configured Kannel SMPP gateway with Clickatell, whose API
> acknolidges
No, but kannel is fully SMPP 3.4 compatible, SMPP is the most worked
protocol, and have not been any tickets about it lately.
BR,
Nikos
- Original Message -
From: "Gjergji Guri"
To:
Sent: Friday, August 20, 2010 6:37 PM
Subject: SMPP Configuration with Clickatell
H
starting the configuration work, I just wanted to know whether
someone has configured Kannel SMPP gateway with Clickatell, whose API
acknolidges compliance with SMPP version 3.4.
Regards,
Gjergji
Hi,
Before starting the configuration work, I just wanted to know whether
someone has configured Kannel SMPP gateway with Clickatell, whose API
acknolidges compliance with SMPP version 3.4.
Regards,
Gjergji
ro Cornejo [mailto:[EMAIL PROTECTED]
Sent: 16 March 2008 23:28
To: users@kannel.org
Subject: Clickatell dlr (callback)
Hi
I´m using clickatell successfully since some time ago. But now I´ll like to
get the dlr from them.
Does anyone has a kannel configuration for capturing the dlr?
In clickatell
Hi,
Short answer: Yes.
See
http://www.kannel.org/download/1.4.1/userguide-1.4.1/userguide.html#AEN2817
_
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: 16 March 2008 21:28
To: users@kannel.org
Subject: Clickatell dlr (callback)
Hi
I´m using
Hi
I´m using clickatell successfully since some time ago. But now I´ll like to
get the dlr from them.
Does anyone has a kannel configuration for capturing the dlr?
In clickatell I see that there is a configuration called callback. Does thsi
callback url calls a local script I´v to implement or
I try to connect to clickatell with kannel on HTTP API.
I had many problems and try to fix them. I have been reading source code and
try to find the exact steps.
As I couldn't find any good guide I think I can post my steps here for using
by others.
this configuration of kannel work f
how could I set callback url in clickatell http api to get messages by
kannel?
--
--Vahid Ghafarpour.
http://vahid.ghafarpour.ir/
vahid at ghafarpour dot ir
ghafarpour at gmail dot com
I want to set the climsgid which send to clickatell when ask kannel to send
a message
how can I handle it?
--
--Vahid Ghafarpour.
http://vahid.ghafarpour.ir/
vahid at ghafarpour dot ir
ghafarpour at gmail dot com
I forget to copy list...
-- Forwarded message --
From: Alvaro Cornejo <[EMAIL PROTECTED]>
Date: Apr 24, 2007 11:24 AM
Subject: Re: http smsc with clickatell
To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
Hi
The link for clickatell is:
http://api.clickatell
Hi,
Where did you get the :2345 bit from in the URL? I think you will
find it will work if you remove that.
Regards
Ben
On 24 Apr 2007, at 13:48, [EMAIL PROTECTED] wrote:
Hi,
I am using the url for the clickatell and connect-allow-ip as
smsc-id = click
send-url = http
Hi,
I am using the url for the clickatell and connect-allow-ip as
smsc-id = click
send-url = http://api.clickatell.com:2345/http
connect-allow-ip = 196.30.96.134
in smskannel.conf, is it correct
I got an error as
2007-04-24 18:20:32 [2112] [11] ERROR: Couldn't fetch
Hi Ben
Thanks for your info. I was able to successfully connect to clickatell.
in addition to your comments, there were an issue with the send-url.
The config finally is:
# SMSC HTTP CLICKATEL
group = smsc
smsc = http
smsc-id = click
system-id = X <--- API-ID
system-type = clickat
Alvaro,
You need to specify the clickatell system-id, so add the following
line :-
system-id = x
(where is your system id). I wonder if you mixed that up with
smsc-id as you blanked that out?
If you want DLRs you will need to specify the port = xxx option as
well. Then set up
Hi All
I'm trying to setup a link to clickatell.
I'tried several configs for the usr/pass/api_id/send-url in the smsc
definition with no success. In most cases I get
2007-04-23 00:13:16 [7378] [11] DEBUG: Octet string dump ends.
2007-04-23 00:13:16 [7378] [7] ERROR: HTTP[2960797]: M
Dindaine johan wrote:
Has someone already configured kannel with clickatell SMPP API.
it has been 3 days that I try to configure it.
yep, Clickatell uses some "fancy" SMPP v3.4 optonal fields for various things,
but Kannel should be able to deal with them if interface version 3
Has someone already configured kannel with clickatell SMPP API.
it has been 3 days that I try to configure it.
Please help me or explain this configuration.
For the record, we are now using the Clickatell HTTP driver on
production and it works like a charm. We are not stressing it a lot
yet, but we will in the future and so far we have no issues with it.
We are using to complement our premium number in Spain.
Thank's Rene for [yet another]
I think the best way to answer this question is to redirect you to the
source code.
The Clickatell API code is located in smsc/smsc_http.c.
There is also other HTTP based SMSC's in there. You can look at them for an
example.
Rene Kluwen
Chimit
-Original Message-
From: [EMAIL PROT
Rene,
I'd like to test this patch out, but don't have a Clickatell account.
I do have an account at another sms site, offering a HTTP API.
What and where should I change in your patch, to make it compatible
with the other site? In other words, what is specific to Clickatell?
Thanks,
Robert
Pending the patch to the Users Guide (which can take a while) here are some
hints:
To make it work, add the following to your kannel.conf.
group = smsc
smsc = http
system-type = clickatell
smsc-id = clickatellsmsc
allowed-smsc-id = clickatell
port = 8060
send-url = https://api.clickatell.com/http
: woensdag 12 april 2006 15:57To:
users@kannel.orgSubject: [Kannel 322]: Clickatell http driver
patch - Testers wanted!
Hi Kluwen,
I was configuring a gateway using Kannel and
Clickatell using your patch and instructions.It worked fine. Now i want to redirect the MO sms from
Hi Kluwen,
I was configuring a gateway using Kannel and
Clickatell using your patch and instructions.It worked fine. Now i want to redirect the MO sms from Kannel's SMSBOX to
my desired page on a different server automatically. Is it possible and how
?
Thanks in Advance.
Bilal Awan
Hello,
Does anyone
know where to find instructions on using the clickatell adapter ?
Thanks
To make it work, add the following to your kannel.conf.
group = smsc
smsc = http
system-type = clickatell
smsc-id = clickatellsmsc
allowed-smsc-id = clickatell
port = 8060
send-url = https://api.clickatell.com/http
smsc-username =
smsc-password =
system-id =
connect-allow-ip = *.*.*.*
You can
Sent: dinsdag 14 maart 2006 18:45
To: users@kannel.org
Subject: RE: [Kannel 322]: Clickatell http driver patch - Testers
wanted!
Attached to this post is a Clickatell HTTP driver.
New from previous version is that this patch also supports MO messages.
Rene Kluwen
Chimit
-Original
Attached to this post is a Clickatell HTTP driver.
New from previous version is that this patch also supports MO messages.
Rene Kluwen
Chimit
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Rene Kluwen
Sent: maandag 13 maart 2006 14:34
To: users@kannel.org
See the bugreport below.
It will be nice if people can test this patch.
Rene Kluwen
Chimit
-Original Message-
From: Apache [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: zondag 12 maart 2006 22:08
Subject: [Kannel 322]: Clickatell http driver patch
The following NEW
I think many Kannel users are using Clickatell.
Why don't you make it available as a patch that can be included into CVS?
IMHO this is not a custom patch but something that can be used by a large
part of the community.
Rene Kluwen
Chimit
> BTW I havn't included support for t
BTW I havn't included support for the clickatell sendAuth URL yet as this is
not madatory and be avoided by simply providing hte username and password
each time.
I intend to add sendAuth at some point but if someone has a burning need I
can push it futher up my work stack...
-Chris
- Ori
All,
If anyone out there wants kannel to work with Clickatell's HTTP api then let
me know as I have a smsc_http.c (with assistance from Gareth Reakes -
thanks) which does the job.
Regards,
-Chris Dobbs
Any tips configuration on how to use Kannel and Clickatell HTTP API ?
Regards
Joao Correia
Dear Sean,
You must call Clickatell support.
Error 92 usually means that Clickatell's server is denying connection from
your IP. If you try telnetting smpp.clicatell.com on port 2345 (or whatever
port(s) thet´ve assigned to your smpp connection) and you´ll get the same
error 92.
I ha
Dear Support,
I am still unable to establish an SMPP link to Clickatell. I am trying
from two servers.
Server One is topup.ie 213.94.212.100 which we have isolated from our
firewall. It is connected to a router 213.94.212.97 . I am getting a
message System error 92: Protocol not available. I
Hi,
That happens when your SMPP connection is not yet approved by Clickatell,
or if you have not allowed your IP to connect (from the Clickatell web
control panel).
Try telnetting smpp.clickatell.com on port 2345, you'll get the same error 92.
If you have not enabled your IP to co
Hi,
I am unable to connect to the Clickatell SMPP service using kannel 1.2.1
This is the configuration I am using in the kannel.conf file.
group = smsc
smsc = smpp
host =smpp.clickatell.com
port = 2345
recieve-port = 2345
smsc-username = "XXX"
smsc-password = "
52 matches
Mail list logo
