Hi Urmi,
urmi lakkad wrote:
>
> Hello Bogdan,
>
> Thank you for your help.
>
> My problem of Dialog module is solved. The dialog were not inserted
> into the DB. But now its inserted. I have set the flag before the
> INVITE and after forwardign the call to proxy. Now its working fine.
>
I'm gla
Hello Bogdan,
Thank you for your help.
My problem of Dialog module is solved. The dialog were not inserted into
the DB. But now its inserted. I have set the flag before the INVITE and
after forwardign the call to proxy. Now its working fine.
One more question I would like to ask is that, for
Hi Urmi,
some great philosopher said "patience is a virtues" ;).
I took a look at the log you sent and does not seam to be complete. I
was looking for the processing of 200 OK reply and all I could found was:
Aug 25 16:06:43 [5488] DBG:core:parse_msg: version:
Aug 25 16:06:43 [5488] DBG:core:p
Hello,
Will u please suggest me the some solution of my DIALOG module problem !!
Thank u very much in advance.
-Urmi
On Tue, Aug 25, 2009 at 4:59 PM, urmi lakkad wrote:
> Hello Bogdan,
>
> Thank you very much.
> Here I have attached my OpenSIPs Log. so please find the attachment.
>
> -Urmi
>
Hello Bogdan,
Thank you very much.
Here I have attached my OpenSIPs Log. so please find the attachment.
-Urmi
Looks good - can you post the opensips logs (in debug=6) for this single
call ? just to verify.
Regards,
Bogdan
urmi lakkad wrote:
> Hello Bogdan,
>
> Thank you for ur response.
>
>
Hello Bogdan,
Thank you very much for your quick response.
Here I have attached OpenSIPs call log.
-Urmi
On Tue, Aug 25, 2009 at 3:54 PM, Bogdan-Andrei Iancu wrote:
> Looks good - can you post the opensips logs (in debug=6) for this single
> call ? just to verify.
>
> Regards,
> Bogdan
>
> ur
Looks good - can you post the opensips logs (in debug=6) for this single
call ? just to verify.
Regards,
Bogdan
urmi lakkad wrote:
> Hello Bogdan,
>
> Thank you for ur response.
>
> Here with this mail I have _attached my SIP call capture_ using ngrep.
> So, please find the attachment. and do ne
Hello Bogdan,
Thank you for ur response.
Here with this mail I have *attached my SIP call capture* using ngrep.
So, please find the attachment. and do needful.
-Thanks
Urmi
On Tue, Aug 25, 2009 at 12:41 PM, Bogdan-Andrei Iancu <
bog...@voice-system.ro> wrote:
> Post the SIP capture of the cal
Post the SIP capture of the call you are testing with. Use "ngrep -d any
. port 5060" to get the capture - this will solve the mystery.
Regards,
Bogdan
urmi lakkad wrote:
> Hello,
>
> Can u please suggest me some solution of my problem of DIALLOG module ?
>
> Thank you for your attention.
>
> -U
Hello,
Can u please suggest me some solution of my problem of DIALLOG module ?
Thank you for your attention.
-Urmi
2009/8/21 urmi lakkad
> Hello Brett,
>
> Thank you very much for quick response.
>
> My calls are working fine. I have checked through SIPp and also with
> Grandstream Phones. T
Hello Brett,
Thank you very much for quick response.
My calls are working fine. I have checked through SIPp and also with
Grandstream Phones. The call is working fine with out failure. At the time
of call, I have started the wireshark to capture the packets, but there also
I m not getting any neg
Urmi,You log shows the call having failed. I'm not sure why you think it
runs for the proper duration. But as far as OpenSIPs is concerned, the call
failed. It's likely a problem in your sipp scenario. It's very possible that
sipp thinks the call is up, but the proxy does not.
In any case, OpenSIP
Hello Stanisław Pitucha,
Thank you for support.
No, My call is established perfectly and is running for the specified
duration without fail.
I m firing the call using SIPp.
Also, the dialog state gives me 1.
Thanks for ur attention.
-Urmi
2009/8/20 Stanisław Pitucha
> 2009/8/20 urmi lakkad
2009/8/20 urmi lakkad :
> Am I doing right or not ? If not, please tell me the correct way.
> One more thing, Is my configuration is correct or not ??
It looks like your call doesn't even get accepted:
Aug 19 17:46:27 [6060] DBG:dialog:next_state_dlg: dialog
0x2d55af90 changed from state 1 to
Hello Brett,
Thank you for support.
I am firing a SIPp call of more than 20 seconds and when the call is going
on, I m checking in the DB also after call completion I am checking in the
DB. But the Dialog entry is not there in dialog table.
Am I doing right or not ? If not, please tell me the co
Have you created a test scenario that keeps the dialog open for a while?
Then checked?
On Thu, Aug 20, 2009 at 12:37 AM, urmi lakkad wrote:
> Hello Brett,
>
> Thank you very much for your attention.
>
> I have continuously checked my DB. but Dialog is *not* added to the DB.
> In log it shows the
Hello Brett,
Thank you very much for your attention.
I have continuously checked my DB. but Dialog is *not* added to the DB.
In log it shows the dialog is created successfully, and then it is destroyed
as well.
Dont know y its behaving like this !!
Once again Thank you for your support.
-Urmi
Is it possible that your dialog is being destroyed so quickly you don't see
that it was added to the db and then subsequently removed?
Aug 19 17:46:27 [6060] DBG:dialog:dlg_onreply: dialog 0x2d55af90 failed
(negative reply)
On Wed, Aug 19, 2009 at 8:40 AM, urmi lakkad wrote:
> Hello,
>
> I
Hello,
I am using OpenSIPs-1.5.1 version. I am trying to implement the dialog
module of it.
When I am firing the call, its dialog should be created, and it should be
stored in the database. Right !!
But my problem is that calls are working fine. The dialog is created
successfully but its not stron
19 matches
Mail list logo
