hello
i'm adding a new host into ovirt
after the installation procces is finished I got an error: "VDSM kvm6
command ConnectStoragePoolVDS failed: Cannot find master domain".
on the vdsm server in /dev/disk/by-path/ i see the block device but
device-mapper not mappying it
then I found the master's
On Mon, Dec 6, 2021 at 12:47 PM Patrick Lomakin
wrote:
>
> Hello. If you want to use an installation file of a previous version you need
> to install the package ovirt-engine-appliance-4.4-.rpm. You can use the
> command "yum install
> https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/x86_6
On Sun, Dec 5, 2021 at 8:13 PM Valerio Luccio
wrote:
> I stopped the VMs and then "hosted-engine --vm-shutdown" followed by
> "hosted-engine --vm-start", I thought that would restart everything, but
> apparently not.
>
> Now I just did "systemctl status ovirt-ha-broker" and got this ugly thing:
>
On Sun, Dec 5, 2021 at 12:38 PM Eric Szeto wrote:
>
> Hello all, just curious if anyone knows we can install an older version of
> oVirt engine? We have the latest 4.4.9, is there a way to install 4.4.7
> instead? Thank you.
There is no official/tested/supported way.
The repos do generally con
ge from NFS to
iSCSI?
Current architecture:
Ovirt engine 4.4.4.7-1.el8 on centos 8.x, on bare metal intel desktop
2 hosts 4.4.4.7-1.el8 on centos 8.x
TrueNAS Core 2020, with shares exposed as NFS
10 GBit dedicated storage Network
Thanks,
*David Johnson*
_
This is affecting me as well on RHEL 8.5 hosts.
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Wednesday, December 1st, 2021 at 2:25 AM, Gary Pedretty
wrote:
> Started happening for me yesterday. Was working just a few days ago.
>
> Gary
>
> [FAILED] ovirt-ansible-
On Mon, Nov 29, 2021 at 6:06 AM Rene Jr Purcell wrote:
>
> Allright after reading the bug report you've shared and looking again at the
> logs I felt you were right on it, so I tried to update dnf to the latest
> version, put hosted-engine in global maintenance and then rerun engine-setup.
> It
On Sun, Nov 28, 2021 at 8:46 PM Nathanaël Blanchet wrote:
>
> Hello
>
> I successfully migrated from HE 4.3.10 to HE 4.4.9, but I think I commited a
> mistake:
>
> The HostedEngine vm was running on the host (haboob) where I deployed the
> upgrade path.
>
> Everything was ok except that I deploy
On Sun, Nov 28, 2021 at 3:40 AM Gary Pedretty wrote:
>
> Keep getting the following error on a new clean install of the Hosted Engine
> on CentOS Stream. This is latest updated CentOS Stream (version 8 not 9) and
> latest version of ovirt
>
> https://resources.ovirt.org/pub/yum-repo/ovirt-relea
On Sat, Nov 27, 2021 at 2:01 AM wrote:
>
> Hi! I'm having issue updating my nodes, normally I just clicked on them and
> update each of them without problem. I haven't updated since few months, now
> I'm unable to. So I checked the doc and saw that I probably should update my
> engine first so
On Thu, Nov 25, 2021 at 4:32 PM Valerio Luccio
wrote:
> Hello all,
>
> my broker.log files are suddenly filling up with lines that start with:
>
> Listener::DEBUG::2021-11-24
> 09:13:20,795::listener::103::ovirt_hosted_engine_ha.broker.listener.Action.get_stats::(wrapper)
> Executing RPC handle
On Thu, Nov 18, 2021 at 2:14 PM Christoph Timm wrote:
>
> looks like they are already aware of it:
Indeed.
> https://lists.ovirt.org/archives/list/de...@ovirt.org/thread/BDYP62MAJL2QVQZ7RHM2USZD4HXBGUA6/
Now replied there, and created this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=20246
; > memory
> > > > allocator).
> > > >
> > > > I thought maybe the switch to CentOS 8 and python 3 might clear
> > > > something up, but obviously not. Any ideas?
> > > >
> > >
> > > I guess we still have the reproducib
Hi team,
I saw that RHEL 8.5 was released yesterday, so I just put one of my hosts that
doesn't have local gluster storage into maintenance mode and again attempted an
update.
The update again failed through the oVirt web UI, and a `yum update` from the
command line again failed with the same i
On Thu, Nov 4, 2021 at 6:32 AM wrote:
>
> Hi
>
> This is the first time I have posted a question on here.
Welcome :-).
> I am attempting to deploy a Self Hosted Engine with RHV 4.4.8, RHEL 8.4 using
> a PowerFlex (ScaleIO) volume. I have done this several times in the past with
> oVirt 4.3.x a
Hi,
On Fri, Oct 29, 2021 at 11:55 AM Matyi Szabolcs
wrote:
>
> Hi,
>
> I get the following error when hosted-engine --deplying:
>
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster facts]
>
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacente
On Thu, Oct 28, 2021 at 2:40 PM Richard Chan
wrote:
>
>
> On Thu, Oct 28, 2021 at 7:19 PM Yedidyah Bar David wrote:
>>
>> Hi,
>>
>> On Thu, Oct 28, 2021 at 1:49 PM Richard Chan
>> wrote:
>>>
>>> Hello.,
>>>
>>> Scena
Hi,
On Thu, Oct 28, 2021 at 1:49 PM Richard Chan
wrote:
> Hello.,
>
> Scenario: Upgrading from 4.3 to 4.4
>
Please provide more details. How do you upgrade?
Do you follow some document/procedure? Which? At which point are you in?
>
> Situation: When running engine-setup on the new (standalon
ine1.mydomain.com left intact
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Saturday, October 23rd, 2021 at 3:35 AM, Strahil Nikolov via Users
wrote:
> That's why I put the user and the pass in single quotes... Like this:
>
On Wed, Oct 27, 2021 at 9:47 AM wrote:
> Hi everybody. We are trying to transfer our project from using VMware
> vCenter to oVirt. Everything looks good, but when it comes to snapshots
> there is a quite big difference. In current application we are using VM
> snapshots to switch the VM from one
On Wed, Oct 27, 2021 at 8:43 AM wrote:
> Hi
>
> We are a server building company, we already supply 2-3 high availability
> storage clusters/virtualization per month based on commercial/paid software.
>
> For lower end clients we like to use oVirt hyperconverged, would like
> support/share knowle
I'm running into the same issue with a RHEL 8.4 host.
The following is on my host:
[root@cha2-storage dwhite]# yum repolist
Updating Subscription Management repositories.
repo id
repo name
ovirt-4.4
Greetings all,
Is there a good guide for securing the ovirt system (hosts, controller,
VM's) via hardware based 2 level authentication, such as Yubikeys?
Thank you in advance.
*David Johnson*
___
Users mailing list -- users@ovirt.org
To unsubs
4-ee75ad2300c2<* Connection #0 to host
ovirt-engine.mydomain.com left intact
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Wednesday, October 20th, 2021 at 11:55 PM, Strahil Nikolov
wrote:
> Try with curl -u 'admin@internal'@'pass' ...
>
Message ‐‐‐
On Wednesday, October 20th, 2021 at 7:12 AM, Eyal Shenitzky
wrote:
> On Wed, 20 Oct 2021 at 12:36, David White wrote:
>
> > Hah. Wow.
> > Thanks for your patience on this. lol.
> >
> > There they are!
> > I just cross-checked these disk_id&
ecure Email.
‐‐‐ Original Message ‐‐‐
On Wednesday, October 20th, 2021 at 4:08 AM, Eyal Shenitzky
wrote:
> Hi David,
>
> Since you tried first to execute the query without semicolon the second
> attempt to run the query with the semicolon failed.It considers both line
On Wed, Oct 20, 2021 at 8:35 AM Raj P wrote:
> Hi, I ma tryinf to deploy hosted engine and keeps on failing with
> following errors.
>
> Am new to oVirt and unabe to figure out what the issues is?
> any help would be very much appreciated.
>
> [ INFO ] TASK [ovirt.ovirt.engine_setup : Install oVi
>From Host 1, try this:
ssh root@localhost
And see if it prompts to add the host to your known_hosts file at that point.
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Tuesday, October 19th, 2021 at 2:58 PM, wrote:
> ok I am setting up the gluster file system.
>
> I
, 2021 at 8:39 AM, Nir Soffer wrote:
> On Fri, Oct 15, 2021 at 11:38 AM David White via Users
> wrote:
>
> > Thank you very much.
> > I was able to (re)set the `engine` user's password in Postgres.
> > Unfortunately, I'm still having trouble unlocking th
of the query.
>
> That's why you see no output.
>
> On Tue, 19 Oct 2021 at 13:24, David White wrote:
>
> > Thank you.
> > However, that was one of the queries I already tried.
> >
> > All of the queries I listed in my previous email returne
> SELECT * FROM image_transfers;
>
> On Tue, 19 Oct 2021 at 03:48, David White wrote:
>
> > Would this be found in the "image_transfers" table?
> >
> > \dt shows me that there are 156 tables in the engine database.
> > And I see an image_transf
r wrote:
>
> > On Fri, Oct 15, 2021 at 11:38 AM David White via Users
> > wrote:
> >
> > > Thank you very much.
> > > I was able to (re)set the `engine` user's password in Postgres.
> > > Unfortunately, I'm still having trouble unl
Hi Brad,
What are you using for storage, and are you trying to setup both of your
physical servers into the same cluster?
In my scenario (a hyperconverged environment with Gluster), ideally, you need
two different networks, on separate network interfaces: One for your backend /
storage network,
e transfer in progress".
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Sunday, October 17th, 2021 at 5:34 AM, Shani Leviim
wrote:
> Hi David,Have you tried running the taskcleaner script with the updated
> password?$ PGPASSWORD=xx
> /usr/share/ovirt-engine/s
h ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Friday, October 15th, 2021 at 4:32 AM, David White via Users
wrote:
> Thank you very much.
> I was able to (re)set the `engine` user's password in Postgres.
> Unfortunately, I'm still having trouble unlocking the disks.
&g
intenance and reboot it
> (there are other ways but that's the simplest) to take effect.
>
> Best Regards,Strahil Nikolov
>
> > On Wed, Oct 13, 2021 at 2:49, David White via Users
> > wrote:___
> >
> > Users ma
fully.
Any other ideas?
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Thursday, October 14th, 2021 at 10:15 AM, Shani Leviim
wrote:
> Hi David,
> Taken from [1], for setting the password for the engine user.
> su - postgres
>
> psql
>
> postgres=# cr
I am trying to put a host into maintenance mode, and keep getting this error:
Error while executing action: Cannot switch Host cha1-storage.my-domain.com to
Maintenance mode. Image transfer is in progress for the following (3) disks:
e0f46dc5-7f98-47cf-a586-4645177bd6a2,
06bd3678-bfab-4793-a839-
On Tue, Oct 12, 2021 at 6:45 PM wrote:
>
> Hello,
> can anyone get to the public openstack image repository
> ovirt-image-repository?
>
> Also when I try browse the site I get
>
> This site can’t be reached
> https://glance.ovirt.org/ is unreachable.
Thanks for the report.
Adding in
type : he_local
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Tuesday, October 12th, 2021 at 4:38 PM, David White via Users
wrote:
> > Check the scores of the systems via 'hosted-engine --vm-status'.
> That must be the problem.
>
> Host a has a
st c back on,
> the engine shuts down from a, and comes back up on c.
>
> Check the scores of the systems via 'hosted-engine --vm-status'.Check vdsm
> logs on both hosts.Check the logs in the engine itself.
>
> Best Regards,Strahil Nikolov
>
> > On Tue, Oct 12, 2021
About a month ago, I completely rebuilt my oVirt cluster, as I needed to move
all my hardware from 1 data center to another with minimal downtime.
All my hardware is in the new data center (yay for HIPAA compliance and 24/7
access, unlike the old place!)
I originally built the cluster as a singl
I can't remember if I've asked this already, or if someone else has brought
this up.
I have noticed that gluster replication in a hyperconverged environment is very
slow.
I just (successfully, this time) added a brick to volume that was originally
built on a single-node Hyperconverged cluster.
On Thu, Oct 7, 2021 at 11:49 AM Erez Zarum wrote:
>
> Thank you all.
> Answering myself.
>
>
> cd /usr/share/ovirt-engine/ansible-runner-service-project
> ansible-runner --rotate-artifacts 20 --artifact-dir
> /usr/share/ovirt-engine/ansible-runner-service-project/artifacts -m ping
> --hosts all[
e?
Glad you asked.
Using the hosted engine VM for the ISO domain is deprecated and not
recommended. See also:
https://bugzilla.redhat.com/show_bug.cgi?id=1332813
So, yes - better put the ISO domain elsewhere.
Best regards,
>
> Regards
>
> Yedidyah Bar David escreveu no dia q
On Wed, Oct 6, 2021 at 7:58 PM Paulo Silva wrote:
>
> Hi,
>
> Is there any official procedure to increase the disk size of a self-hosted
> engine?
None that I know of.
The only official way is to use backup/restore (to a new SD).
The default disk size should be enough for most needs. Are you s
On Tue, Oct 5, 2021 at 8:50 PM Erez Zarum wrote:
>
> Hey,
> No, i am talking about the ansible-runner artifacts, when the ovirt-engine
> runs a playbook (which is a task in the webui for example), it creates a
> folder in /usr/share/ovirt-engine/ansible-runner/artifacts for each run.
Thanks for
On Tue, Oct 5, 2021 at 3:54 PM Erez Zarum wrote:
>
> Hey,
> the ovirt-engine runs ansible playbooks and uses the ansible-runner project,
> what happens is that if you have a lot of tasks the artifacts of
> ansible-runner fills up the disk space of the ovirt-engine.
> They are located in /usr/sha
On Thu, Sep 16, 2021 at 12:31 PM German Sandoval wrote:
>
> Probably this isn't the place to ask, but I'm doing a test with an Almalinux
> Physical host and trying to install a standalone instance and I get this
> error when I use the Engine-Setup, I'm using a Centos stream guide.
>
> [ INFO ]
I replaced the SSD intent log drive with an NVME drive, and the system is
much more stable now.
*David Johnson*
*Director of Development, Maxis Technology*
844.696.2947 ext 702 (o) | 479.531.3590 (c)
<https://www.linkedin.com/in/pojoguy/>
<https://maxistechnology.com/wp-content/uploa
On Tue, Sep 14, 2021 at 9:12 AM Tommy Sway wrote:
> Thanks for your article!
>
> My Ovirt system does not show a monitoring portal. How do I integrate
> Grafana into my Ovirt portal?
>
> The configuration doesn't seem to have the Grafana option even after the
> reinstallation:
>
>
>
> [root@olvmm
On Mon, Sep 13, 2021 at 1:08 AM Gianluca Cecchi
wrote:
>
> On Sun, Sep 12, 2021 at 10:35 AM Yedidyah Bar David wrote:
>>
>>
>> >>
>> >> It was the step I suspect there was a regression for in 4.4.8 (comparing
>> >> with 4.4.7) when up
Hi Gianluca,
On Fri, Sep 10, 2021 at 10:04 AM Gianluca Cecchi
wrote:
>
>
> On Wed, Sep 1, 2021 at 4:26 PM Gianluca Cecchi
> wrote:
>>
>> On Wed, Sep 1, 2021 at 4:00 PM Yedidyah Bar David wrote:
>>>
>>>
>>> >
>>> >
On Fri, Sep 10, 2021 at 1:14 AM Diggy Mc wrote:
>
> Where can I find the documentation on the procedure to upgrade the Hosted
> Engine as well as the oVirt Nodes? Specifically, both the HE and Nodes are
> currently at 4.4.4 and I would like to upgrade to 4.4.8.3.
https://www.ovirt.org/documen
On Mon, Sep 6, 2021 at 2:52 PM Artem Tambovskiy
wrote:
>
> Hello,
>
> Just had an issue with my cluster with a self-hosted engine (hosted-engine is
> not coming up) and decided to redeploy it as I have a backup.
>
> Just tried a hosted-engine --deploy --restore-from-file=engine.backup
>
> But the
g, and the export is happening over the
frontend 1GB network?
I'm going to cancel this operation, as the VM has now been down for close to an
hour.
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Friday, September 3rd, 2021 at 4:33 AM, David White
wrote:
> Upda
September 3rd, 2021 at 4:10 AM, David White via Users
wrote:
> In this particular case, I have 1 (one) 250GB virtual disk..
>
> Sent with ProtonMail Secure Email.
>
> ‐‐‐ Original Message ‐‐‐
>
> On Tuesday, August 31st, 2021 at 11:21 PM, Strahil Nikolov
>
In this particular case, I have 1 (one) 250GB virtual disk..
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Tuesday, August 31st, 2021 at 11:21 PM, Strahil Nikolov
wrote:
> Hi David,
>
> how big are your VM disks ?
>
> I suppose you have several
On Sun, Aug 29, 2021 at 1:13 PM Gianluca Cecchi
wrote:
>
> On Fri, Aug 27, 2021 at 7:57 PM Gianluca Cecchi
> wrote:
>>
>>
>>
>> Next step will be to try removing one of the two hosts while still all env
>> in 4.3.10 and then take backup of engine and then install the second as
>> 4.4.8 and see
On Fri, Aug 27, 2021 at 7:59 PM Thomas Hoberg wrote:
>
> You would do good to mirror everything that oVirt is using, especially if you
> want to install/rebuild while remaining offline.
>
> The 1.1 GB file you mention is the oVirt appliance initial machine image,
> which unfortunately seems to g
On Wed, Aug 25, 2021 at 10:28 AM Gianluca Cecchi
wrote:
>
> On Tue, Aug 24, 2021 at 6:58 PM Gianluca Cecchi
> wrote:
>>
>> Hello,
>> I'm testing what in object in a test env.
>> For this I downloaded the async 1 iso of the node, released on 14/07:
>> https://resources.ovirt.org/pub/ovirt-4.4/iso
On Tue, Aug 24, 2021 at 12:30 PM dhanaraj.ramesh--- via Users
wrote:
>
> Hi Ritesh, Thank you.. Yes I was following this and all works fine except at
> the last steps where I'm getting error and setup failed
>
> ERROR ] Failed to execute stage 'Misc configuration': Command
> '/usr/share/ovirt-en
I have an HCI cluster running on Gluster storage. I exposed an NFS share into
oVirt as a storage domain so that I could clone all of my VMs (I'm preparing to
move physically to a new datacenter). I got 3-4 VMs cloned perfectly fine
yesterday. But then this evening, I tried to clone a big VM, and
ut it into pastebin or provide a link to access these files?
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Sunday, August 22nd, 2021 at 3:58 AM, Liran Rotenberg
wrote:
> On Sun, Aug 22, 2021 at 3:42 AM David White via Users users@ovirt.org wrote:
>
> >
I have an unused 200GB partition that I'd like to use to copy / export / backup
a few VMs onto, so I mounted it to one of my oVirt hosts as /ova-images/, and
then ran "chown 36:36" on ova-images.
>From the engine, I then tried to export an OVA to that directory.
Watching the directory with "ls",
em to the new cluster.
Is this possible?
Is there a better way to do this move?
Thanks,David
Sent with ProtonMail Secure Email.
publickey - dmwhite823@protonmail.com - 0x320CD582.asc
Description: application/pgp-keys
signature.asc
Description: OpenPGP digital signature
___
On Sat, Aug 14, 2021 at 8:58 AM Gilboa Davara wrote:
>
> Shabbat Shalom,
>
> On Wed, Aug 11, 2021 at 10:03 AM Yedidyah Bar David wrote:
>>
>> On Tue, Aug 10, 2021 at 9:20 PM Gilboa Davara wrote:
>> >
>> > Hello,
>> >
>> > Many than
zilla, and I generated an sosreport on two
of my three systems prior to restarting vdsmd.
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Friday, August 13th, 2021 at 9:31 PM, David White
wrote:
> I have updated the Bugzilla with all of the details I included below,
ail Secure Email.
‐‐‐ Original Message ‐‐‐
On Friday, August 13th, 2021 at 2:41 PM, Nir Soffer wrote:
> On Fri, Aug 13, 2021 at 9:13 PM David White via Users users@ovirt.org wrote:
>
> > Hello,
> >
> > It appears that my Manager / hosted-engine isn't wo
Hello,
It appears that my Manager / hosted-engine isn't working, and I'm unable to get
it to start.
I have a 3-node HCI cluster, but right now, Gluster is only running on 1 host
(so no replication).
I was hoping to upgrade / replace the storage on my 2nd host today, but aborted
that maintenance
On Wed, Aug 11, 2021 at 10:03 PM wrote:
>
> Hi all,
> I'm looking for some information about the future of oVirt. With CentOS
> going away have they talked about what they will be doing or moving to? I'd
> like to see Ubuntu support.
I suggest to search the archives of this list - there were m
On Tue, Aug 10, 2021 at 9:20 PM Gilboa Davara wrote:
>
> Hello,
>
> Many thanks again for taking the time to try and help me recover this machine
> (even though it would have been far easier to simply redeploy it...)
>
>> >
>> >
>> > Sadly enough, it seems that --clean-metadata requires an active
On Tue, Aug 10, 2021 at 7:19 AM Gilboa Davara wrote:
>
>
> On Mon, Aug 9, 2021 at 4:13 PM Gilboa Davara wrote:
>>
>>
>>
>> On Mon, Aug 9, 2021 at 2:46 PM Yedidyah Bar David wrote:
>>>
>>> On Mon, Aug 9, 2021 at 1:56 PM Gilboa Davara wrote:
&
On Mon, Aug 9, 2021 at 1:56 PM Gilboa Davara wrote:
>
>
>
> On Mon, Aug 9, 2021 at 12:16 PM Gilboa Davara wrote:
>>
>> Hello,
>>
>> On Mon, Aug 9, 2021 at 11:50 AM Yedidyah Bar David wrote:
>>>
>>> On Mon, Aug 9, 2021 at 11:43 AM Strah
On Mon, Aug 9, 2021 at 12:38 AM wrote:
>
> I viewed the certificate using vi I did see the "Begin Certificate" and "End
> Certificate" with the certificate in between. I tried adding a new Storage
> Domain that I wanted to use to store ISO's. It wasn't until then that I
> found out that I ne
On Mon, Aug 9, 2021 at 11:43 AM Strahil Nikolov via Users
wrote:
>
> Corrupted metadata is the problem you see.
>
> I think there was a command to fix it, but I can't recall it right now.
I think you refer to 'hosted-engine --clean_metadata'. Gilboa - I
suggest to search the net/archives for docs
On Fri, Aug 6, 2021 at 1:22 AM wrote:
>
> I obtained the Certificate from the link on from the ovirt console main page.
Which one? The one with the text "Engine CA Certificate", linking at:
https://$ENGINE_FQDN/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA
?
>
Thank you for all the responses.
Following Strahil's instructions, I *think* that I was able to reconstruct the
disk image. I'm just waiting for that image to finish downloading onto my local
machine, at which point I'll try to import into VirtualBox or something.
Fingers crossed!
Worst case sc
On Thu, Aug 5, 2021 at 9:20 AM Tommy Sway wrote:
>
> I've had this problem before, and it happened when the CA was configured
> correctly.
>
>
>
> Then try again, it worked.
>
>
>
> I don't know why until today.
Me neither :-(
If this is reproducible, we can try to understand the root cause and
On Thu, Aug 5, 2021 at 1:44 AM wrote:
> I'm attempting to upload an ISO that is approximately 9GB in size. I've
> succssfullly started th upload process via the oVirt Management
> Console/Disk. The upload started however, it now has a status of "Paused
> by System". My storage type is set to N
On Tue, Aug 3, 2021 at 3:11 AM wrote:
> I've installed ovirt on the my server (HPDL380Gen10) and was able to start
> the configuration process on the local machine. I'm tried to access the
> ovirt console remotely via the web however I've had no success. I'm using
> the same URL that is used lo
>
I am not aware of a tested, documented alternative.
>
> Thanks.
>
> El 2/8/21 a las 13:02, Nicolás escribió:
>
> Hi Didi,
>
> El 7/4/21 a las 9:27, Yedidyah Bar David escribió:
>
> On Wed, Mar 24, 2021 at 12:07 PM Nicolás
> wrote:
>
> Hi,
>
> I'm res
Hi Patrick,
This would be amazing, if possible.
Checking /gluster_bricks/data/data on the host where I've removed (but not
replaced) the bricks, I see a single directory.
When I go into that directory, I see two directories:
dom_md
images
If I go into the images directory, I think I see the has
My hyperconverged cluster was running out of space.
The reason for that is a good problem to have - I've grown more in the last 4
months than in the past 4-5 years combined.
But the downside was, I had to go ahead and upgrade my storage, and it became
urgent to do so.
I began that process last w
On Sat, Jul 31, 2021 at 10:15 AM wrote:
>
> I was trying to install the latest ovirt engine v4.4.7 but it failed at the
> following step when I was using the command line.
>
> I have tried installing as user root or other sudoers, but same issue.
>
> [ INFO ] changed: [localhost]
> [ INFO ] TASK
On Wed, Jul 28, 2021 at 1:32 AM wrote:
>
> I've installed ovirt several times on a fresh machine from scratch. I've had
> no problems with the install however I'm unable to login via the web console
> using the assigned password entered at the time of the install. On the last
> 3 tries I've k
On Tue, Jul 27, 2021 at 11:56 AM Shani Leviim wrote:
>
> Hi Chris,
> Indeed, the ISO domains are deprecated, and you can use a data domain for
> uploading iso files (as you've mentioned).
> To do that, you need to use image-io for uploading images
>
> Here's image-io documentation:
> http://ovir
On Mon, Jul 26, 2021 at 7:38 PM Gianluca Cecchi
wrote:
>
> On Wed, Jun 9, 2021 at 7:25 AM Yedidyah Bar David wrote:
>>
>>
>>
>> To answer your direct question: RHV 4.4.6 is based on RHEL+AV 8.4, and
>> the release dates of each part were coordinated int
On Fri, Jul 23, 2021 at 6:17 PM Christoph Timm wrote:
>
>
>
> Am 21.07.21 um 12:33 schrieb Christoph Timm:
> >
> > Am 21.07.21 um 12:17 schrieb Yedidyah Bar David:
> >> On Mon, Jul 19, 2021 at 2:20 PM Yedidyah Bar David
> >> wrote:
> >>>
On Thu, Jul 22, 2021 at 2:12 AM wrote:
>
> I've finally installed successfully ovirt 4.4.7 using the default
> installation. I would like to change the passwords for the following
> userids: postgres, engine database and data warehouse database. Can someone
> provide me with information gradi
On Mon, Jul 19, 2021 at 2:20 PM Yedidyah Bar David wrote:
>
> On Mon, Jul 19, 2021 at 1:54 PM Christoph Timm wrote:
> >
> >
> >
> > Am 19.07.21 um 10:52 schrieb Yedidyah Bar David:
> > > On Mon, Jul 19, 2021 at 11:39 AM Christoph Timm wrote:
> > &g
On Wed, Jul 21, 2021 at 1:01 AM Valerio Luccio wrote:
>
> Hi list,
>
> I have a hosted engine running on a CentOS 8. The engine and all the VM's are
> stored on a 4-node gluster. I had some issues with the gluster and then the
> hosted-engine stopped working (even though the virtualization dash
Thank you.
I'm doing some more research & reading on this to make sure I understand
everything before I do this work.
You wrote:
> If you rebuild the raid, you are destroying the brick, so after mounting it
> back, you will need to reset-brick. If it doesn't work for some reason , you
> can alw
On Mon, Jul 19, 2021 at 1:54 PM Christoph Timm wrote:
>
>
>
> Am 19.07.21 um 10:52 schrieb Yedidyah Bar David:
> > On Mon, Jul 19, 2021 at 11:39 AM Christoph Timm wrote:
> >>
> >> Am 19.07.21 um 10:25 schrieb Yedidyah Bar David:
> >>> On Mon
On Mon, Jul 19, 2021 at 11:39 AM Christoph Timm wrote:
>
>
> Am 19.07.21 um 10:25 schrieb Yedidyah Bar David:
> > On Mon, Jul 19, 2021 at 11:02 AM Christoph Timm wrote:
> >>
> >> Am 19.07.21 um 09:27 schrieb Yedidyah Bar David:
> >>> On Mon, J
On Mon, Jul 19, 2021 at 11:02 AM Christoph Timm wrote:
>
>
> Am 19.07.21 um 09:27 schrieb Yedidyah Bar David:
> > On Mon, Jul 19, 2021 at 10:04 AM Christoph Timm wrote:
> >> Hi Didi,
> >>
> >> thank you for the quick response.
> >>
> &
On Mon, Jul 19, 2021 at 10:04 AM Christoph Timm wrote:
>
> Hi Didi,
>
> thank you for the quick response.
>
>
> Am 19.07.21 um 07:59 schrieb Yedidyah Bar David:
> > On Mon, Jul 19, 2021 at 8:39 AM Christoph Timm wrote:
> >> Hi List,
> >>
> >
On Mon, Jul 19, 2021 at 8:39 AM Christoph Timm wrote:
>
> Hi List,
>
> I'm trying to understand why my hosted engine is moved from one node to
> another from time to time.
> It is happening sometime multiple times a day. But there are also days
> without it.
>
> I can see the following in the ovir
On Fri, Jul 9, 2021 at 6:45 PM Eugène Ngontang wrote:
>
> Hi,
>
> I understood we have to put hosted-engine into maintenance mode and shutdown
> the VMs if we want to power off the host (otherwise it will reboot). I'm
> setting up a process to
>
> - put the HestedEngine in global maintenance mod
> volumes. I’ve done this in the past when doing major maintenance on gluster
> volumes to err on the side of caution.
>
> On Sat, Jul 10, 2021 at 7:22 AM David White via Users wrote:
>
> > Hmm right as I said that, I just had a thought.
> > I DO have a "bac
301 - 400 of 2744 matches
Mail list logo
