Hi,
I'm developing a webapp and I would like to be able to display the list of
active sessions for that specific webapp, in a specific page, and I'd like to
get a detailed view: Session Id, Creation time, last activity, IP address,
username (in case he's authenticated)
I searched forums and
On 22 Dec 2010, at 08:49, Jean-Noël Colin jn.co...@gmail.com wrote:
Hi,
I'm developing a webapp and I would like to be able to display the list of
active sessions for that specific webapp, in a specific page, and I'd like to
get a detailed view: Session Id, Creation time, last activity, IP
Hi
Thanks for the feedback; actually, jsp or servlet is not really the point,
since I'm using icefaces anyway.
So it seems that I can't get access to the list of sessions connected to my
webapp, except the limited information provided by HttpSession?
Cheers
Jean-Noël
On 22 Dec 2010, at
Good morning,
We are trying to run axis2/Apache on Windows 7. If we try to launch
Tomcat as Administrator it works fine and the service we have developed
is shown as part of the available services for axis2.
However, if we try the same but with a different user (also with
administrator
2010/12/22 Jean-Noël Colin jn.co...@gmail.com:
I also tried casting the HttpSession retrieved in the HttpSessionListener,
without success.
That would be StandardSessionFacade, not a StandardSession.
Would you have any further suggestion?
The manager webapp (aka HTMLManagerServlet) uses
Many thanks Konstantin. I'll look into the Valve idea
Cheers
Jean-Noël
On 22 Dec 2010, at 12:23, Konstantin Kolinko wrote:
2010/12/22 Jean-Noël Colin jn.co...@gmail.com:
I also tried casting the HttpSession retrieved in the HttpSessionListener,
without success.
That would be
Some additional info, which I just saw and which looks strange to me:
the stdout_XXX.log doesn't change it's date.
That is to say that I have stdout_20101221.log which also contains log
entries from today, 12-22. I was under the impression that Tomcat
automatically closes the file at midnight
2010/12/22 Thomas Kloeber kloe...@ics.de:
Some additional info, which I just saw and which looks strange to me: the
stdout_XXX.log doesn't change it's date.
That is to say that I have stdout_20101221.log which also contains log
entries from today, 12-22. I was under the impression that Tomcat
Hi ALL,
We are using tomcat 6.0 in production environment and facing a critical problem
that tomcat hangs with variable frequency in a week. We have tried to figure
out
the problem but couldn't reach the root cause. To investigate the cause we used
the lambda probe tool. Lamba probe shows
On 21/12/2010 23:49, George Sexton wrote:
-Original Message-
From: Caldarale, Charles R [mailto:chuck.caldar...@unisys.com]
Sent: Monday, December 20, 2010 1:08 PM
To: Tomcat Users List
Subject: Re: IS that a good idea moving all the common libs?
On Dec 20, 2010, at 12:16, Luca
On 22/12/2010 11:48, Rhonny David wrote:
Hi ALL,
We are using tomcat 6.0 in production environment
Exactly which version? Also exact versions for JDK and OS please.
Mark
-
To unsubscribe, e-mail:
Konstantin Kolinko wrote on 22.12.2010 12:44:
2010/12/22 Thomas Kloeberkloe...@ics.de:
Some additional info, which I just saw and which looks strange to me: the
stdout_XXX.log doesn't change it's date.
That is to say that I have stdout_20101221.log which also contains log
entries from today,
I think i have already provided these except tomcat. Anyways we are using
Tomcat
6.0.29, which is pointed to jre 1.5.0_10. And the OS is Microsoft Windows
Server
2003, R2 , Standard Edition, Service Pack2.
Regards,
David
From: Mark Thomas ma...@apache.org
Cool,
I created context config file attendance.xml
Context docBase=d:/java/apache-tomcat/wars/attendance-0.4.war/
and after application was deployed to right context path
Thanks very much
Petr P.
On 17.12.2010 17:13, Caldarale, Charles R wrote:
From: Petr Prochazka
Hello All,
Thank you for the suggestions.
We noted that we have these errors in the logs -
SEVERE: The web application [/rel] registered the JBDC driver
[oracle.jdbc.OracleDriver] but failed to unregister it when the web
application was stopped. To prevent a memory leak, the JDBC Driver has been
Hello Andre
TCP0.0.0.0:8080 0.0.0.0:0 LISTENING
5356
[tomcat6.exe]
Apart from the above and the other ports in LISTEN state, when tomcat
freezes, do you have any other ports in the netstat listing, shown as
CLOSE_WAIT for example ?
If yes, how many ?
net.sourceforge.jtds.jdbc.JtdsResultSet.close ( JtdsResultSet.java:486 )
I think it is an issue with implementation of JtdsResultSet.close(), [1]
0485:if (!getConnection().isClosed()) {
0486:// Skip to end of result set
0487:
Hi.
K J.Sreekumar wrote:
Hello Andre
TCP0.0.0.0:8080 0.0.0.0:0 LISTENING
5356
[tomcat6.exe]
Apart from the above and the other ports in LISTEN state, when tomcat
freezes, do you have any other ports in the netstat listing, shown as
CLOSE_WAIT for example ?
If
I won't support your reasoning, because the same JTDS driver version we are
using for our other site and there the number of concurrent users of the
application is more than 800 and therefore the volume of concurrent requests is
very high, but we never faced the issue of this nature. Secondly,
I am using standard HTTP 1.1 connector. This is what I see from tomcat output
Ø INFO [main] 2010-12-22 07:43:03,071 org.apache.coyote.http11.Http11Protocol
- Initializing Coyote HTTP/1.1 on http-9080
And here is the connector configuration element from server.xml
Connector
Hi.
1) Please provide Tomcat version, Java version, platform OS.
2) The exception message seems pretty clear : Tomcat does not like the looks of one of the
chunk headers of what it receives.
A protocol analyser may be the only way to see what is really being sent/received here,
although with
Tomcat version is: 6.0.20
Platform: CentOS 5.5
Java: Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
It happens in the middle. But its not always the same point where it happens.
-Original Message-
From: André Warnier [mailto:a...@ice-sa.com]
Hi.
1) Please provide Tomcat
We are using tomcat connector as follows --
Connector connectionTimeout=50 port=8080 protocol=HTTP/1.1 ...
Based on the documentation we are using the blocking call, right? So the
servlet thread is blocked for IO while reading request and writing response.
In case we want to use NIO, we
On 22/12/2010 16:31, shrikant patel wrote:
We are using tomcat connector as follows --
Connector connectionTimeout=50 port=8080 protocol=HTTP/1.1 ...
Based on the documentation we are using the blocking call, right?
It depends. Probably the BIO connector but it could also bee the APR
hi shrikant,
there are many benefits of NIO in a tomcat 6, the main being there is no longer
a thread-per-connection limit.
Note in Tomcat 7, even with the blocking connector, you can have more
connections than threads.
The NIO connector will read your request headers in a non blocking fashion,
If closing the result set requires reading it in full (as JTDS does),
it can take significant time.
You should take thread dumps to see what the threads are doing and
what they are waiting for. (Three thread dumps taken several seconds
apart).
Post them inline, or somewhere else (like pastebin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kikuchi,
On 12/21/2010 11:42 PM, Yu Kikuchi wrote:
I also think it's not good idea to make JkLogLevel ERROR.
I'll consider to use rotatelogs.
You might miss important information if setting to ERROR. Good luck.
BTW, I think it's reasonable for
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Shri,
On 12/22/2010 11:31 AM, shrikant patel wrote:
We are using tomcat connector as follows --
Connector connectionTimeout=50 port=8080 protocol=HTTP/1.1 ...
Aside from the comments made by others, I highly recommend an upgrade to
6.0.29:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Konstantin,
On 12/22/2010 11:56 AM, Konstantin Kolinko wrote:
If closing the result set requires reading it in full (as JTDS does),
it can take significant time.
Especially if the queries are something like
SELECT * FROM huge_table
You should
On 22 déc. 2010, at 12:49, Mark Thomas wrote:
It is do-able if you are prepared to accept the associated constraints:
- all web apps must use the exact same version of every shared library
- updating the shared libraries requires a Tomcat restart
- all of the shared web apps must be well
interestingly its not - not located in either place (mac/windows tomcat)
as a velocity-[version].jar
I downloaded Velocity+V-Tools and added them to TOMCAT_HOME/lib folder and
now it works.
Its not on my mac anywhere, that i can find in a self contained jar file.
Plus we don't have the
Httpd 2.2.17
Tomcat 6.0.29
Sun JDK 1.6.0_22
Spring Framework (3.0.2 I think)
All on Windows
The Dev team is creating a new app that we are planning to deploy using httpd
as a load-balancer to two Tomcats on separate servers. Httpd is configured to
serve static files - graphics, css, etc. -
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sylvain,
On 12/22/2010 12:54 PM, Sylvain Laurent wrote:
On 22 déc. 2010, at 12:49, Mark Thomas wrote:
It is do-able if you are prepared to accept the associated constraints:
- all web apps must use the exact same version of every shared library
Hi.
Not knowing anything about JSP per se, I would nevertheless guess that the links are
written using something like
img src=%getContextPath%/static/mylogo.jpg/ or similarly, instead of just plain html
img src=/Portal/static/mylogo.jpg/.
That probably leads the JSP compiler to think it has to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joe,
On 12/22/2010 1:57 PM, Joe Greenawalt wrote:
interestingly its not - not located in either place (mac/windows tomcat)
as a velocity-[version].jar
I downloaded Velocity+V-Tools and added them to TOMCAT_HOME/lib folder and
now it works.
right, its definitely going in my pom, i just did that to get it to work,
when i get back from vacation, im going to try and figure out the problem.
thanks
On Wed, Dec 22, 2010 at 3:55 PM, Christopher Schultz
ch...@christopherschultz.net wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 22 Dec 2010, at 18:07, Ajay TS ajayts1...@gmail.com wrote:
I am new to Tomcat and am trying to install Apache Tomcat 7.0.5 on Windows 7
with java version 1.6.0_21. I am able to install it fine but unable to
configure SSL. I am configuring it on port 8443 based on documentation
provided. After
Thanks, that was what I was thinking.
Since the only JSP I have access to is the welcome-file, I'm not sure I can
verify.
Q: I would think the getContextPath would be desirable, in case we change the
war-file name, etc., but I wouldn't think that would cause the jsessionID
string to get
Addendum.
You could also write the links as
img src=static/mylogo.jpg/
(without leading /). That would keep them relative to the current app, and cause less
work if you ever want to call the application other than Portal.
You could also put the static elements in your app under Tomcat.
On 22 Dec 2010, at 10:39, Nuria Sánchez Almodóvar n...@gatv.ssr.upm.es
wrote:
Good morning,
We are trying to run axis2/Apache on Windows 7. If we try to launch Tomcat
as Administrator it works fine and the service we have developed is shown as
part of the available services for axis2.
In the specific case I mention below, this is the source from the jsp:
link rel=icon type=image/x-icon href=c:url
value=/static/images/icons/favicon.ico/ /
I'm not a jsp programmer, but I'm betting it has something to do with the
c:url / encapsulation.
Jeff
-Original Message-
Definitely the culprit. Now, I just have to convince the Dev team that they
are, once again, a bunch of idiots.
I'm sure it's some framework/tool they are using. The question now is, if I
can't get them to not use it in this case, is there some way to modify httpd to
strip the ;jsessionid
Please just reply to the list.
On 22 Dec 2010, at 22:49, ajayts1...@gmail.com ajayts1...@gmail.com wrote:
thats the thing. the keystore file is there. I tried the real path as well.
Regardless of what path I put, the error messages shows it is lookin at a
different path.
Does the user
I'd definitely consider it a bug if tomcat continues startup in HTTP mode
instead, when the file is not found.
Filip
On 12/22/2010 3:35 PM, Pid * wrote:
On 22 Dec 2010, at 18:07, Ajay TSajayts1...@gmail.com wrote:
I am new to Tomcat and am trying to install Apache Tomcat 7.0.5 on Windows 7
On 22 Dec 2010, at 23:02, Jeffrey Janner jeffrey.jan...@polydyne.com wrote:
Definitely the culprit. Now, I just have to convince the Dev team that they
are, once again, a bunch of idiots.
Fail.
I'm sure it's some framework/tool they are using. The question now is, if I
can't get them to
Pid * wrote:
On 22 Dec 2010, at 23:02, Jeffrey Janner jeffrey.jan...@polydyne.com wrote:
Definitely the culprit. Now, I just have to convince the Dev team that they
are, once again, a bunch of idiots.
Fail.
Pid,
why /do/ the static objects links embedded in the login page get back to the
On 22 Dec 2010, at 23:38, André Warnier a...@ice-sa.com wrote:
Pid * wrote:
On 22 Dec 2010, at 23:02, Jeffrey Janner jeffrey.jan...@polydyne.com wrote:
Definitely the culprit. Now, I just have to convince the Dev team that
they are, once again, a bunch of idiots.
Fail.
Pid,
why /do/ the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Filip,
On 12/22/2010 6:03 PM, Filip Hanik - Dev Lists wrote:
I'd definitely consider it a bug if tomcat continues startup in HTTP
mode instead, when the file is not found.
I seem to remember a recent bugfix that won't allow a connector to
Pid * wrote:
On 22 Dec 2010, at 23:38, André Warnier a...@ice-sa.com wrote:
Pid * wrote:
On 22 Dec 2010, at 23:02, Jeffrey Janner jeffrey.jan...@polydyne.com wrote:
Definitely the culprit. Now, I just have to convince the Dev team that they
are, once again, a bunch of idiots.
Fail.
Pid,
49 matches
Mail list logo