[weewx-user] Belchertown MQTT live stats problem

For over a year my live stats has been working flawlessly until recently. Now it says *Failed connecting to the weather station* Looking at the dev console in chrome I am seeing this for the error and not sure how to test this out to see what is going on. mqttws31.min.js:36 WebSocket

Re: [weewx-user] Re: wind chill for Vantage Pro 2

Ha, shouldn’t have been in such a rush and should have read your reply thoroughly, thought I was repeating what you had said. But yes LOOP2 only, some gems in there but nothing that has convinced me to change. Gary -- You received this message because you are subscribed to the Google Groups

Re: [weewx-user] Re: wind chill for Vantage Pro 2

Geez, Gary, you're right! So, you would also have to specify LOOP2 packets. See the section [Vantage] in the User's Guide. [Vantage] loop_request = 2 -tk On Fri, Jul 24, 2020 at 5:13 PM gjr80 wrote: > Windchill is only in included in the

[weewx-user] Re: wind chill for Vantage Pro 2

Windchill is only in included in the Davis LOOP2 packet, it’s not in the LOOP packet or archive record (the defaults) from the console. So unless you have set WeeWX to use the LOOP2 packet WeeWX will never see windchill from the console, irrespective of StdWXCalculate settings. Gary -- You

Re: [weewx-user] Re: wind chill for Vantage Pro 2

Davis has a publication *Calculations of Derived Variables *, that shows the formula they use. It's the same formula used by WeeWX. From the publication, it appears that they do not apply the

[weewx-user] Re: wind chill for Vantage Pro 2

Thanks for the reply. I did check the weewx.conf file and and found that wind chill should be coming from the VP2. See below. I believe your comment about when wind chill applies is only for the case where weewx calculates the result. The VP2 does not have the restriction of being below 50deg.

Re: [weewx-user] wind chill for Vantage Pro 2

The service StdWXCalculate sets where wind chill (and other derived types) comes from. If you set it to "prefer_hardware", it should come from the VP2, if it's available. Also, please note that wind chill does not kick in unless the wind is over 3 mph, and the temperature is below 50F. The

[weewx-user] Re: Chrome stopped refreshing the page at localhost

On Friday, July 24, 2020 at 1:50:03 PM UTC-7, Bill Roberts wrote: > > It works correctly updating wunderground every 5 minutes > at https://www.wunderground.com/dashboard/pws/KAZTUCSO1729 > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

[weewx-user] Chrome stopped refreshing the page at localhost

I use weewx to observe the data from my accurite 5-in-1 wx station. I use the belchertown skin as well. It was performing well an the webpage at localdata automatically refreshed every 5 minutes. A couple of days ago, it stopped refreshing automatically, will manually refresh if I click the

Re: [weewx-user] Re: New GW1000 Driver available for testing

That’s exactly what I am seeing. I am going to look at the interceptor map for WH65 and see where things appear to deviate. On Fri, 24 Jul 2020 at 19:43, Bill Arthur wrote: > I started as you and later added a WiFi-less console. I'm not sure where > to look for the WH65 designation. > No, I

Re: [weewx-user] Re: New GW1000 Driver available for testing

I started as you and later added a WiFi-less console. I'm not sure where to look for the WH65 designation. No, I didn't change the map. I was unable to run the driver directly to test, so I just launched it blindly... and it worked. I am seeing an anomaly with pressure, too. I'm looking at the

[weewx-user] Re: Data Logger

Restart of an old thread. >From what I read on another site, the Acurite PC software does clear the data logger. Is there no way for Weewx to do the same? I don't really care about the actual data on the logger - Weewx does this on its own - but having the message appear on the Acurite display

Re: [weewx-user] Re: New GW1000 Driver available for testing

That is the same array that I am using with gw1000 except I do not have a console. Does this show up as WH65? I have anomaly with the barometer but I cannot understand why. Have you changed the sensor map at all? On Fri, 24 Jul 2020 at 19:17, Bill Arthur wrote: > Hi Ian, > I have the Ambient

Re: [weewx-user] Re: New GW1000 Driver available for testing

Hi Ian, I have the Ambient Weather WS-2902 array: temperature, rainfall, humidity, wind speed & direction, UV and solar. Indoor and pressure is from the GW-1000 On Friday, July 24, 2020 at 1:07:41 PM UTC-5 steep...@gmail.com wrote: > Hi Bill, > What sensors do you have connected? > > On Fri,

Re: [weewx-user] Re: New GW1000 Driver available for testing

Gary, No need for apologies. I'm glad that I was able to spot these things. And in a small way, I feel like I'm helping improve it for everyone. On Friday, July 24, 2020 at 8:44:57 AM UTC-5 gjr80 wrote: > My apologies all round Bill, a few typos and a wrong assumption about > package installs

Re: [weewx-user] Re: New GW1000 Driver available for testing

Hi Bill, What sensors do you have connected? On Fri, 24 Jul 2020 at 19:06, Bill Arthur wrote: > Ian, > Yes, just the simple Seasons skin for now. I now have 12 hours of data and > it's looking good. > I've compared it to my weather station console and the data all looks > correct. > > On

Re: [weewx-user] Re: New GW1000 Driver available for testing

Ian, Yes, just the simple Seasons skin for now. I now have 12 hours of data and it's looking good. I've compared it to my weather station console and the data all looks correct. On Friday, July 24, 2020 at 12:56:01 PM UTC-5 steep...@gmail.com wrote: > Hi Bill, > No need to be sorry. Just

[weewx-user] wind chill for Vantage Pro 2

Hello all, I have been using weewx (3.9.2.1 with standard skin) successfully for several months now and just noticed that the wind chill graph does not reflect the values reported by my VP2. It always matches the outside temp values. I have seen that weewx can calculate wind chill on its own,

Re: [weewx-user] Re: New GW1000 Driver available for testing

Hi Bill, No need to be sorry. Just wanted to exchange notes on experiences. I assume you then using the default Seasons skin. How is that looking? Ian On Fri, 24 Jul 2020 at 18:12, Bill Arthur wrote: > Hi Ian > No, I don't have Weather34 on the RasPi that I'm testing the GW1000 > extension,

Re: [weewx-user] Re: New GW1000 Driver available for testing

Hi Ian No, I don't have Weather34 on the RasPi that I'm testing the GW1000 extension, it's a fresh install. It'll be a while until I'm ready to modify the RasPi that has Weather34. Sorry. On Friday, July 24, 2020 at 10:09:08 AM UTC-5 steep...@gmail.com wrote: > Hi Bill, > > Are you still using

Re: [weewx-user] Re: New GW1000 Driver available for testing

Got it running by setting Python 3.5 to default this way: https://raspberry-valley.azurewebsites.net/Python-Default-Version/ Matthias Am Freitag, 24. Juli 2020 16:55:23 UTC+2 schrieb NanoG5Kite: > > Yet not working for me...: > > > root@DietPi:~# sudo /home/weewx/bin/wee_extension >

Re: [weewx-user] Re: New GW1000 Driver available for testing

I see that b5 maps 'luminosity': 'light' In my weewx.conf I have radiation = light / 126.7 if light is not None else None To display that value in the Belchertown skin I have station_observations = barometer, dewpoint, outHumidity, rainWithRainRate, radiation, UV When running with the

Re: [weewx-user] Re: New GW1000 Driver available for testing

Hi Bill, Are you still using the Weather34 skin. If so, I am interested what barometer reading you are displaying when using the gw1000 driver. Thanks, Ian On Friday, July 24, 2020 at 4:02:17 AM UTC+1, Bill Arthur wrote: > > I couldn't get it to run from the command line. > When I did

Re: [weewx-user] Re: New GW1000 Driver available for testing

Yet not working for me...: root@DietPi:~# sudo /home/weewx/bin/wee_extension --install=/var/tmp/gw1000-0.1.0b5.tar.gz Request to install '/var/tmp/gw1000-0.1.0b5.tar.gz' Extracting from tar archive /var/tmp/gw1000-0.1.0b5.tar.gz Saving installer file to /home/weewx/bin/user/installer/GW1000

[weewx-user] UV and Sun with Nick's gauge generator.

Hi, I'm using weewx since years now and I'm very grateful to Tom for his wonderful job and passion! I use version 3.9.2 plus the Nick's gauge generator. I wanted to add Sun and UV gauges to my pages, so I've added this in "skin.conf" : [GaugeGenerator] image_width = 180

Re: [weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu piątek, 24 lipca 2020 16:01:50 UTC+2 użytkownik Tom Keffer napisał: > > Did you read the section *Porting to new hardware > * in the Customizing > Guide? > >> >> Yes, I saw this chapter yesterday when sailing through docs ocean but it is

Re: [weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

Did you read the section *Porting to new hardware * in the Customizing Guide? -tk On Fri, Jul 24, 2020 at 1:03 AM Tomasz Lewicki wrote: > Dear Weewx users. > > It's my first post. I looked into wiki and docs but still are stuck so I > ask

Re: [weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

W dniu piątek, 24 lipca 2020 14:34:18 UTC+2 użytkownik Mike Harold Chan napisał: > > cool wx sensor, but I wish will also include Rain collector, Solar and UV > sensor and can be read with weather display, these are my important part too >> >> >> I will add some of them for sure - maybe

Re: [weewx-user] Re: New GW1000 Driver available for testing

My apologies all round Bill, a few typos and a wrong assumption about package installs - have rewritten and simplfied the GitHub readmes this afternoon. They should be correct now. Perhaps a bit late now but to run the driver directly the following should work: $ PYTHONPATH=/usr/share/weewx

Re: [weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

cool wx sensor, but I wish will also include Rain collector, Solar and UV sensor and can be read with weather display, these are my important part too On Fri, Jul 24, 2020 at 4:03 PM Tomasz Lewicki wrote: > Dear Weewx users. > > It's my first post. I looked into wiki and docs but still are

[weewx-user] DIY weather station + Weewx on Raspberry Pi - how to join them?

Dear Weewx users. It's my first post. I looked into wiki and docs but still are stuck so I ask here. My configuration is as follows: 1. DIY solar powered WiFi weather station (built from here: https://www.instructables.com/id/Solar-Powered-WiFi-Weather-Station-V20/ - the project known to