add ‘dateTime = datetime’ back to field_map.
worth a go while gary works on it
> On 25 Aug 2020, at 8:37 am, Timothy Buchanan
> wrote:
>
> How would I add dateTime to the field_map?
>
> On Monday, August 24, 2020 at 9:59:17 AM UTC-6 graha...@gmail.com wrote:
> try adding ‘dateTime’ to the fiel
problem: in trying to find out why the ecowitt PM2.5 sensor inside my house has
unexpectedly high readings (one problem), i discovered that its values
interfere with an identical sensor outside my house (another problem)
since deploying my two new ecowitt pm2.5 sensors (one inside, one outside)
Hi All,
I'm trying to extend weewx so that there is a 4th option for unit systems
called "CANMETRICWX" (Canadian Metric).
This would be the same as "METRIC" except rain values are in mm and
pressure values are in kPa and eventually would also include a "Humidex"
calculation as well.
I thought
On Sunday, August 23, 2020 at 2:37:40 PM UTC-7, Chris Alemany wrote:
>
> This is fantastic! I just installed a pond and stream in the front yard
> and would love to be able to monitor the depth of it. Could you provide a
> parts/supply list for the sensor, transmitter and receiver?
Isn't this
On Monday, August 24, 2020 at 3:26:47 PM UTC-7, Dennis Clark wrote:
>
> Trying to install on a new RP4. New to both the Rpi and Weewx so not sure
> where my error lies. Looking for some next steps.
> After getting it installed and checking the syslog I get the following:
>
> Aug 24 23:19:59 raspbe
I doubt adding dateTime will do anything, fields that already exist in the
loop packet are ignored. Given me some time to work through the log extract
and the driver code.
Gary
On Tuesday, 25 August 2020 at 08:37:52 UTC+10 timothye...@gmail.com wrote:
> How would I add dateTime to the field_ma
How would I add dateTime to the field_map?
On Monday, August 24, 2020 at 9:59:17 AM UTC-6 graha...@gmail.com wrote:
> try adding ‘dateTime’ to the field_map. i think augmentations are skipped
> (gw1000 fields are not added) because on its absence the service assumes
> the offered data is infini
Trying to install on a new RP4. New to both the Rpi and Weewx so not sure
where my error lies. Looking for some next steps.
After getting it installed and checking the syslog I get the following:
Aug 24 22:20:50 raspberrypi weewx[1853] CRITICAL weewx.engine:
File "/usr/share/weewx/we
That’s good news.
The forecast extension relies on coercing the various forecast to a standard
representations that is stored in a common schema.
As such, supporting arbitrary icons would not fit in with the scheme.
WU does provide precipType and precipChance. precipType can be rain, snow or
On Monday, August 24, 2020 at 11:48:27 AM UTC-7, loonsailor wrote:
>
> I need a replacement for my 25-year-old Vantage Pro (original, not +) and
> am considering either the Ecowitt 2551 or the 2553 or the Ambient
> equivalents.
>
With a 25 history with Davis gear, why would you change vendors
And Ecowitt is working on PM 2.5, 10, and CO2 that will be released
soon. It is in testing now.
On Monday, August 24, 2020 at 3:15:55 PM UTC-4, galfert wrote:
>
> By the way Davis just announced an air quality sensor called AirLink. It
> does PM 1, 2.5, and 10.
> https://www.weatherstations
By the way Davis just announced an air quality sensor called AirLink. It
does PM 1, 2.5, and 10.
https://www.weatherstations.co.uk/airlink.htm
On Monday, August 24, 2020 at 3:12:33 PM UTC-4, galfert wrote:
>
> 1. The Ultrasonic is better a picking up low wind and may be a bit more
> precise. Bu
1. The Ultrasonic is better a picking up low wind and may be a bit more
precise. But on the top end the ultrasonic stops at 89 mph. The spinning
anemometer stops at 99 mph. Longevity is anyone's bet. no moving parts on
ultrasonic...but electronics can break just as much as something with
moving
I’ve bought two Davis VP2 wireless units used via Craigslist for $200 - $300
over the past 8 years; both work fine, one in warm salt air (FL) one in coastal
NE summer/winter salt air conditions. Davis has parts for all of them, and
re-conditioned ISS units and very good support. They seem to me
"'loonsailor' via weewx-user" writes:
> I need a replacement for my 25-year-old Vantage Pro (original, not +) and
> am considering either the Ecowitt 2551 or the 2553 or the Ambient
> equivalents. I'll also add a WH41 and a WH43 (or ambient equivalents) ar
> quality sensors. I've got a 25 y
I need a replacement for my 25-year-old Vantage Pro (original, not +) and
am considering either the Ecowitt 2551 or the 2553 or the Ambient
equivalents. I'll also add a WH41 and a WH43 (or ambient equivalents) ar
quality sensors. I've got a 25 year database of weather (started on wView)
and
You are right! I assumed, that the forecast would be downloaded immediately
after installing and restarting. Now, three hours later, the cloud column
is completely filled and all is correct. Great job!
So, what about the idea to use the complete set of icons, including
day/night versions? Well,
Hello, since a long time i tried to install weewx to use it with
Weatherlink live.
i start to be crazy. it doesn t work.i want to install it on a raspberry pi
4.Heres what i do.
I install weewx on my raspberry then i installed extension from @grebleem
i set station type in weexconf. and i contro
try adding ‘dateTime’ to the field_map. i think augmentations are skipped
(gw1000 fields are not added) because on its absence the service assumes the
offered data is infinitely old
> On 25 Aug 2020, at 12:47 am, Graham Eddy wrote:
>
> it will be interesting to see what gary concludes.
> it lo
Actually, the most likely problem is that you didn’t wait for a new WU forecast
to be downloaded after installing and restarting. That won’t happen until at
least three hours after the last forecast. Before you do what I asked below,
please check these reports again. Do they not look correct?
What model is your Acurite display?
On Monday, August 24, 2020 at 10:39:48 AM UTC-4, Erik Plourde wrote:
>
> Ok. I thought I did...
>
> I really went through the documentation but I’ll have another (more
> thorough) look tonight.
>
> Best regards
>
>
>
> Le lun. 24 août 2020 à 07:07, rich T >
it will be interesting to see what gary concludes.
it looks to me like the fields are correctly identified and mapped (i presume;
the data is there but i don't see the mapped result) but not inserted into
packet by augmentation. one reason for not inserting the data would be if it is
stale - do
Ok. I thought I did...
I really went through the documentation but I’ll have another (more
thorough) look tonight.
Best regards
Le lun. 24 août 2020 à 07:07, rich T a écrit :
> All you need to do is connect the console to the RPI. Did you install
> "python3-usb" ? See http://weewx.com/docs/
Send the contents of forecast/single-table.html and
forecast/forecast-periods.html that are generated. Also send the contents of a
contemporaneous WU API call. Don’t send excerpts of either.
Are you sure you installed and restarted weewx? I ask because I get icons for
every day in single-tab
field_map used with debug 3.
On Sunday, August 23, 2020 at 6:07:35 PM UTC-6 gjr80 wrote:
> Thanks, from the log it looks like the GW1000 service thread has silently
> died (which it shouldn't, it should die loudly if it dies!). Let's step the
> debug level up, leaving everything else as it is e
Great stuff! Thanks for the comprehensive reply.
Regards
On Monday, 24 August 2020 at 09:33:37 UTC graha...@gmail.com wrote:
> given that you have set 'target_unit = METRICWX’, the raw values inside
> weewx are all in the format of the units defined for METRICWX. the unit for
> speed used in ME
Title: Re: [weewx-user] Re: TFA Klimalogg PRO on RaspberryPi
Hi Walter,
I don't know if your approach is working. The software in the KlimaLogg PRO station is very time critical.
Perhaps you try the driver first within weewx and when it is working you can go from there.
The KlimaLogg PRO base s
All you need to do is connect the console to the RPI. Did you install
"python3-usb" ? See http://weewx.com/docs/setup.htm for prerequisites.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails
Thank you Rich.
Guess I really need to install Acurite connect to a windows computer first
to set this up.
Erik
Le dim. 23 août 2020 à 21:51, rich T a écrit :
> From Acurite site:
>
> *Weather Station models 06039/02064 and 01536/06056* - there is no USB
> Mode setting on the display. Simply o
I hate the new google forum surface!
The link should read:
https://www.weather-watch.com/smf/index.php/topic,67656.msg543684.html#msg543684
and for clarification of the missing entries, it is much better to look at
the Forecast Sampler: Periods
*Periods from Selected Forecast Sources*
Displ
I found this link for assigning the iconCode entries from the WU json file
to the meaning, along with some icons:
https://www.weather-watch.com/smf/index.php/topic,67656.msg543684.html?PHPSESSID=9cntj0deu62o4c9q6jasslpqph#msg543684
After update to version b7, there is still only one icon visible,
given that you have set 'target_unit = METRICWX’, the raw values inside weewx
are all in the format of the units defined for METRICWX. the unit for speed
used in METRICWX is indeed ‘m/s’
whenever you display values, weewx converts from whatever the internal format
is into the units you have req
I have just replaced my Davis Vantage Pro2 wind sensor with an ultrasonic
one. I live in the SW of Ireland looking into the Atlantic and the usual
sensors only last a couple of years before seizing up with rust. In fact I
notice they do not drain water properly from the Anemometer so collect
wa
Luc,
I appreciate so much the profound work you have been doing over the last 5
years.
Could you please advise for my project? I am not using weewx, did not even
install it. Yet I want to retrieve data from KlimaLogg-pro.
starting from: https://github.com/matthewwall/weewx-klimalogg
My approach
I was thinking about a graphic demonstration like that in the wiki:
https://camo.githubusercontent.com/8b5474131edc812687002ab075ec51e1ddb8bd82/687474703a2f2f6c616e6365742e6d69742e6564752f6d77616c6c2f70726f6a656374732f776561746865722f77656577782d666f7265636173742d7461626c652e706e67
where all states
the two valid provided values for ‘manager =‘ are
weewx.manager.DaySummaryManager (preferred) or
weewx.wxmanager.WXDaySummaryManager (deprecated, and note it is not WxDay…) so
you might want to check it is working properly….
> On 24 Aug 2020, at 5:02 pm, themet...@gmail.com
> wrote:
>
> Aug
i don’t know. WMR 200 is starting the polling thread in the constructor,
and it appears to work different from the Vantage device that I have.
Try backfilling in smaller parts, like a year at a time, and try ti keep
the jobs under 5 minutes, or whatever your update interval is.
On Saturday, Ju
Well, well, well, Gary. Indulge you I did, and the first attempt failed
with the same error when I issued this command:
service weewx start
Aug 23 22:13:41 picluster python3[9217]: weewx[9217] INFO __main__: Using
configuration file /etc/weewx/weewx.conf
Aug 23 22:13:41 picluster python3[9217]:
38 matches
Mail list logo