[weewx-user] Re: weewx - mariadb high read and cpu utilization....

...ok...I tracked it down: I updated the * weewx-GTS * xtype extension in October. I disabled the xtype_service *user.GTS.GTSService * and the querys and high load and I/O is gone. Will ask Karen K. Regards, Christian Christian Peters schrieb am Samsta

[weewx-user] weewx - mariadb high read and cpu utilization....

Hi all, i just updated my weewx vm and noticed high cpu load since end of October (average was 20% cpu load, now 80%cpu load). Maybe this is my fault as I added some features but I can't remember what could cause this? Maybe a typo in weewx.conf. I did an iotop -o and get this, even if weewx

[weewx-user] weewx-GTS: print outHumAbs in right format....?

Hi Karen, great extension, thank you very much. I tried to add outHumAbs. It works as .png, but I get the value printed in microgram instead of g/m3 (here 7300679µg/m³ instead of 7.3g/m³: Absolute Luftfeuchte $current.outHumAbs Absolute Luftfeuchte7300679 µg/m³ How can I

[weewx-user] Re: DEFAULT_DELTATIME_FORMAT

Hi , I saw the same error here on Buslleye and ugrade from 4.5.1 to 4.6.2-1. After the downgrade my weewx.conf seems modified/broken as I now saw Fahrenheit instead of Celsius, inHg instead of hPa in my Responsive skin!? Something odd After restoring my weewx.conf too all is ok again now

[weewx-user] Re: DEFAULT_DELTATIME_FORMAT

Same her on Bullseye after upgrade to 4.6.2-1 from 4.5.1. Additional the units changed form Celsius fo T and fomr hPA to inHG !? xzei...@googlemail.com schrieb am Freitag, 11. Februar 2022 um 20:02:01 UTC+1: > seems that in 4.6.x on RasPi 4 (Buster) > DEFAULT_DELTATIME_FORMAT = "%(day)d%(day_l

[weewx-user] Re: DEFAULT_DELTATIME_FORMAT

Hi, same error here with Bullseye and change from 4.5.2 to 4.6.2-1. After reverting to 4.5.2 my labels changed from Celsius to F and from mBar to inHG?! Regards, Christian xzei...@googlemail.com schrieb am Freitag, 11. Februar 2022 um 20:02:01 UTC+1: > seems that in 4.6.x on RasPi 4 (Buste

[weewx-user] Re: DEFAULT_DELTATIME_FORMAT

Hi, I saw the same after upgrade from 4.5.1 to 4.6.2-1 on Debian Bullseye. I rolled back to 4.5.1 but now my weewx.conf was somehow changed the I saw Fahrenheit instead of Celsius values and inHG instead of hPa on my Responsive skin an graphs!? Something seems torbreak my config after the upgr

Re: [weewx-user] Questions about weewx-loopdata 1.3.x

Board extension don’t agree about where to find the > loop-data.txt file. > > Would you send both the LoopData section and the WeatherBoard section of > weewx.conf? > > Cheers, > John > > On Jul 15, 2020, at 5:16 AM, 'Christian Peters' via weewx-user < &

Re: [weewx-user] Questions about weewx-loopdata 1.3.x

John, I just installed the loop-data extension and the weatherboard skin to give it a try. :-) A really nice extension. It was a bit tricky to install it but I hope loop-data is running. I get this /var/www/html/weewx/loop-data.txt file with this text: {"current.dateTime.raw": 1594814866, "

[weewx-user] Re: calculate rainRate for second rain gauge...?

Gary, thanks...so I will wait for your code and hope it will be merged to get easy calculated some kind of rate in the future. Regards, Christian Am Montag, 29. Juni 2020 10:55:48 UTC+2 schrieb gjr80: > > I would not worry about raising anything Christian, the code I am working > on would

[weewx-user] Re: calculate rainRate for second rain gauge...?

Gary, thanks for the link and the explanation. I fear there is some code to understand and to change that to hailRate, will be be out of my skills I fear. Should I raise a feature request in weewx git to add a second or third rain value in the databse with included rainRate computation? Addin

[weewx-user] Re: calculate rainRate for second rain gauge...?

Gary, thanks for that clarification. I'll have a look at the new feature if it will be released in the next weewx point release. As there there seems to be a rainRate software computation available, maybe this could be copied and rainRate substituted by hailRate to get the hailrate working wo

[weewx-user] calculate rainRate for second rain gauge...?

Hi, I read form a second rain gauge via filpile rain values/data into the data base value 'hail', as there is no second rain1, rain2... As it is in the same group as rain all should be fine. It works if I query $day.hail.sum it works. But if I query $current.hailRate I got N/A. It's not prov

[weewx-user] Re: howto receive MQTT data from a running broker and put the data into database with weewx..?

Hi Rich, thank you very much. It works like a charm! :-) I set up a temporary mapping to values already available in the databae. For the temp and humid values it works out of the box, for CPM, CPS and radiation I have to setup unit groups later. This is my working setup - just to have that

[weewx-user] Re: howto receive MQTT data from a running broker and put the data into database with weewx..?

Rich, that's great. I'm not sure whether I should stay on the driver version or switch to the service versionwhich could make it maybe more easy. But if the MQTTSubscribe as service lost connection and wouldn't reconnect I have to restart the main weewx prog to get it up again!? So maybe a

[weewx-user] howto receive MQTT data from a running broker and put the data into database with weewx..?

Hi, I ran a weewx 3.9. station with Python 2 and a seperate weewx instance with the wxMesh.py driver. This works very nice (as far as the broker isn't down or the connection breaks - then a restart of the weewx instance which holds the wxMesh driver is needed...!). As I now switch to Python 3

[weewx-user] Re: problem with css/style of embedded forecast in Responsive skin...

Ok, solved. I copied the content of forecast_table.css in the head of the html file surrounded by . ..this works.:-) -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from i

[weewx-user] Re: problem with css/style of embedded forecast in Responsive skin...

Ok, solved. I copied the content of forecast_table.inc in the head of the html file surrounded by . ..this works.:-) Am Sonntag, 21. Juni 2020 17:17:53 UTC+2 schrieb Christian Peters: > > Hi all, > > maybe some can help me. :-) > I'm not familiar with css and web content. > I t

[weewx-user] problem with css/style of embedded forecast in Responsive skin...

Hi all, maybe some can help me. :-) I'm not familiar with css and web content. I trry to include the weewx forcast extension into the responsive skin. The forcast plugin is working, even with the right formatting if I open the forcast demo pages. (Pic 2) I included the forecast_table.inc file

Re: [weewx-user] Re: move from old 3.9 (python2) machine to a new machine running 4.1.1 (python3) with mysql database from 3.9 to 4.1...?

Thank you, Graham and Cameron, it took a long time but Graham was on the right track. I check $trend.barometer with an #if condition. This gives N/A for $trend.barometer ...??? This works in P2 and 3.9.x but now not in P3 4.x.x? Changing that to $trend($time_delta=3600).barometer gives a v

[weewx-user] Re: move from old 3.9 (python2) machine to a new machine running 4.1.1 (python3) with mysql database from 3.9 to 4.1...?

Hi Caeron, damn...yestheat was obvious. It works now. Thank you very much But Python3 seems not as lazy as Python2, now I got this and weewx stops generating the webpage: Generate failed with exception '' Jun 20 11:00:56 weewx weewx[25088] ERROR weewx.cheetahgenerator: Ignoring temp

[weewx-user] Re: move from old 3.9 (python2) machine to a new machine running 4.1.1 (python3) with mysql database from 3.9 to 4.1...?

Cameron, this doesn't work. I copied my database to the new machine, made a new weewx database and replayed it. If I use the wview_extended.py from the 2.5.-3.9 weewx install, it seems to work. If I add the new additional lines form the 4.0.0. at the end of the wview_extended.py file... day_

[weewx-user] question about external sensors and resync data from a lost connection

Hi all, I have a question concerning some insights of weewx. The setup: Vanatge Pro and a linux box inside the house running weewx, runs smooth since years. Now I built in the garden additional a little homemade station with a rain bucket and two temp sensors (2m and 5cm above ground) and a g

[weewx-user] Re: get WU forecast not working any more...?

Solved. I copied the content of the forecast_table css file into weewx.css. Now all is fine! :-) Am Freitag, 19. April 2019 20:58:51 UTC+2 schrieb Christian Peters: > > Another small problem: > > I used forecast_table.inc > > and expect something which looks like in the wiki page of forecast (Pi

[weewx-user] Re: get WU forecast not working any more...?

I used 3.3.2 now and it runs fine now with OWM for me Thank you. Regards, Christian Am Freitag, 19. April 2019 19:09:43 UTC+2 schrieb Christian Peters: > > Thanks for clarifying. > So I have to update I think... > > The link points to a.py file I can't install via 'wee_extension --install

[weewx-user] Re: get WU forecast not working any more...?

Thanks for clarifying. So I have to update I think... The link points to a.py file I can't install via 'wee_extension --install ' as it looks for a .tgz?! I think I should do it in that way as I think some major things changed since 3.4.0 in the weewx.conf and the installer would add the r

[weewx-user] get WU forecast not working any more...?

Hi all, my forecast disappears from my standard screen. As I figured out here there was an API change of WU service. I obtain the new (longer) key but as there seems to be even a change of the format, it doesn't work. I run forecast 3.0.4. I see there is a much more recent version but I see th

Re: [weewx-user] Re: V3.9.1

OK ... RTFM! :-D Will try this. Regards, Christian Am Freitag, 8. Februar 2019 18:44:13 UTC+1 schrieb Thomas Keffer: > > See the upgrading guide section *Do you need to change anything?* > > -tk > > On Fri, Feb 8, 2019 at 9:26 AM 'Christian Peters&#x

[weewx-user] Re: V3.9.1

Hi Tom, I just updated from 3.8.2 to 3.9.1 but my units seemed to be overwritten (using metrics in 3.8.2 - Celsius, Km/h, mbar) now my Standard skin shows F, inHG and mpH!? Should I uncoment the new section in the weewx.conf file named [[Defaults]] ? I upgraded via .deb and kept all old conf

[weewx-user] Re: weewx output plugin/extension for WXSIM weather simulator?

Hm... yesthere is the 'crt' extension which emitts a cumulus style file, but not a monthly report but a realtime.txt. Am Freitag, 4. Januar 2019 14:14:00 UTC+1 schrieb pmcg...@gmail.com: > > The Cumulus Wiki shows the format of their monthly log files, if you > generated a similar repor

[weewx-user] Re: weewx output plugin/extension for WXSIM weather simulator?

Vince, yesquite interesting (but yes: Win only). I found some information in the quickstart guide: " The Local Station import has settings for where WXSIMATE should look for your data. If you are using Weather Display, the files it’s looking for are log files, such as 12017lg.txt (for Jan

[weewx-user] weewx output plugin/extension for WXSIM weather simulator?

Hi, I had a look at WXSIM Weather Simulator and it's quite interesting. You can simulate and run forcasts with data retrieved from the internet and your local weather station data. The import format are .wrk files and .txt files from Weather Display. I run weewx with

Re: [weewx-user] Re: add external sensors on remote computer to a main weewx installation?

here >>> <https://github.com/morrowwm/weewxMQTT/blob/master/bin/user/wxMesh.py>) >>> expects weewx.METRIC units, that is, rain (and hail) should be in >>> centimeters, not millimeters.​ You can't just simply change to >>> weewx.METRICWX in your copy,

Re: [weewx-user] Re: add external sensors on remote computer to a main weewx installation?

ng. > > Run weewx from the command line and watch what it prints. Tip the bucket > and see what value gets printed. Is it what you expected? > > -tk > > On Sun, Dec 3, 2017 at 9:16 AM, 'Christian Peters' via weewx-user < > weewx...@googlegroups.com > wrot

Re: [weewx-user] Re: add external sensors on remote computer to a main weewx installation?

weewx.METRIC} > data['outTemp'] = (something) > ... > data['hail'] = 0.1# NB: This would be 0.1 cm, or 1mm > > yield data > > There are a two other assumptions as well: > >1. You have not implemented genArchiveRecords() and are, the

Re: [weewx-user] Re: add external sensors on remote computer to a main weewx installation?

> > On Sun, Nov 26, 2017 at 8:02 AM, 'Christian Peters' via weewx-user < > weewx...@googlegroups.com > wrote: > >> Tom, >> >> thank you for that hint. So emitting in mm was the right change. >> I just wonder why my temp values are ok but my

Re: [weewx-user] Re: add external sensors on remote computer to a main weewx installation?

Tom, thank you for that hint. So emitting in mm was the right change. I just wonder why my temp values are ok but my rain data isn't!? Just found that on the wxMesh driver: # map the data into a weewx loop packet _packet = {'usUnits': weewx.METRIC} So I think I have to switch to METRICWX. Re

[weewx-user] Re: add external sensors on remote computer to a main weewx installation?

Gary, im not sure if I have to send the number of bucket tips or the rain data? Maybe that's the fault/problem? As the driver of weewx in this case is the weexMes driver, it will only map the values to weewx? Have to look into that deeper. Maybe I have to send the rain data im mm? Regards, Ch

[weewx-user] Re: add external sensors on remote computer to a main weewx installation?

Hi members, project is progressing, today we added a monoflop on the Arduino to debounce the rain gauge signal. It's working. As described the Arduino sends it's data to a Banana-Pi via MQTT push. On my remote computer I run a second instance of weewx with wxMesh driver which pulls the data fr

Re: [weewx-user] add external sensors on remote computer to a main weewx installation?

ed to work across unreliable networks, and can > even offer store messages when the WLAN is offline, replaying them later. > There are a couple of weewx MQTT drivers around. > > Sounds like an interesting project. Keep us informed! > > -tk > > > > On Fri, Sep 22, 2017

[weewx-user] Re: weewx - weewx-influx - grafana

Hi, a good starting point: http://foxutech.com/setup-influxdb-grafana-and-telegraf-on-ubuntu/ or https://www.circuits.dk/install-grafana-influxdb-raspberry/ Install InfluxDB on your linux computer, https://portal.influxdata.com/downloads Usually nothing to configure (check install with 'in

[weewx-user] Re: dial type indicators for weewx

Patrick, I would love to implement the gauges vince introduced. Is it possible to reactivate the download link to get your skin/code!? Would like to figure out how to implement these gauges in my skin! Thanks in advance. Regards, Christian Am Montag, 30. September 2013 05:41:37 UTC+2 schr

Re: [weewx-user] easy way to readout and display Vantage pro Forecast text in standard skin?

; down, along with temperature. That's it. If it was that simple, the > National Weather Service would not be a billion dollar agency. > > -tk > > > On Thu, Jan 12, 2017 at 6:18 AM, 'Christian Peters' via weewx-user < > weewx...@googlegroups.com > wrote: >

[weewx-user] easy way to readout and display Vantage pro Forecast text in standard skin?

Hi all, is there an easy way (sample code snippet) to readout the forcast text (displayed if I hit the 'Forcast' button) out of my Vantage Pro 2 and display the text in my Standard skin!? Thanks for any help! Regards, Christian -- You received this message because you are subscribed to th