[WISPA] AC Voltage Regulator??

2014-11-10 Thread Gino Villarini
We are having some issues lately on a couple of sites. AC mains is dropping below 90 vac, anyone recommends a good Voltage Regulator? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr ___ Wireless mailing list

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Sean Heskett
Apc battery backup. They will trim and boost for you. We have a site that drops to 100vac in the winter when the heater kicks on (old building and wiring :-/ ) the apc boost the load to 120. On Monday, November 10, 2014, Gino Villarini wrote: > We are having some issues lately on a couple

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Faisal Imtiaz
You can do a battery backup unit, like suggested by Sean H. However to answer your question, APC makes a whole line of Voltage Regulators, which are the product to fix this type of issue. http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313&_nkw=apc+voltage+regulators&_sacat=0

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Gino Villarini
We have a APC ups on site, problem is voltage drops below the UPS threshold (90 vac) I need something that would regulate from 60-70 vac upwards Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: Sean Heskett mailto:af...@zirkel.us>> Reply-To: WIS

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Steve Barnes
Faisal do you use these. I have tried them in the past and when they are working to handle enough clean power for a whole tower they seem to get really hot. I also do not recommend running them off a poor generator to get cleaner power. The one I had melted after 2 hours. Steven Barnes GM PC

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Tim Kerns
We found when using Tripplite UPS the battery would eventually go dead. The UPS would use battery power to boost the voltage, but remain on battery for a period of time (about a minute) to ensure the voltage would be stable. About the time it switched back we would get another drop. It never ha

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Tim Kerns
Gino, that sounds like the issue we had... have your electric company check to see if you are dropping a phase at the transformer servicing you. From: Gino Villarini Sent: Monday, November 10, 2014 7:06 AM To: WISPA General List Subject: Re: [WISPA] AC Voltage Regulator?? We have a APC ups

[WISPA] When the power goes off

2014-11-10 Thread OOLLC-Support
Does anyone have a simple solution for when the circuit-breaker gets kicked? I would very much like to have the system call me on the phone to let me know when the server has lost power. Does anyone have a cheap way to solve this? ___ Wireless mailing l

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Faisal Imtiaz
Then look for AVR (Automatic Voltage Regulators)... and pick one based on the specs.. e.g. http://www.ebay.com/itm/POWERBRIGHT-SVC3000-VOLTAGE-REGULATOR-3000-WATT-AUTOMATIC-SERVO-MOTOR-AC-NEW-/321211901033?pt=US_Power_Inverters_&hash=item4ac9b8a46 9 Regards. Faisal Imtiaz Snappy Internet

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Faisal Imtiaz
I have used the LR-1200 to have clean power in-doors on the bench (When we used to do computer work). And yes they get very hot... if you are going to deploy them in locations where there is not good ventilation, I suggest you size them with a factor of 2 or 3... i.e. if you need 600va load th

Re: [WISPA] When the power goes off

2014-11-10 Thread Josh Luthman
Plug in a Sitemonitor and use a battery backup. With Powercode you can use PagerDuty to do a phone call. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 10, 2014 10:21 AM, "OOLLC-Support" wrote: > Does anyone have a simple solution for when

Re: [WISPA] When the power goes off

2014-11-10 Thread Faisal Imtiaz
Doing this is more of an method than a product. If you have dual power supply server, then you can plug one psu on battery backup, and the other on ac main... monitor the status of PSU via snmp... is one example If you are using Mikrotik routers, you can use the dual power feature on them

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Mike Hammett
Would going to a DC site with a fixed output voltage fix this? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Gino Villarini" To: "WISPA General List" Sent: Monday, November 10, 2014 8:30:09 AM Subject: [WISPA] AC Voltage

Re: [WISPA] AC Voltage Regulator??

2014-11-10 Thread Brett Woollum
You can also use an Online UPS instead of the more traditional type. Online means the UPS is running the load off of the battery at all times. The AC charger is supplying enough power to power your load as well as keep the battery charged. They're designed to provide a stable output when the inp

Re: [WISPA] When the power goes off

2014-11-10 Thread Simon Westlake
PagerDuty.com and Pingdom. Use Pingdom to ping the server, have it create an incident in PagerDuty when that happens. PagerDuty will call your phone. Will cost you $18 a month. On 11/10/2014 09:20 AM, OOLLC-Support wrote: Does anyone have a simple solution for when the circuit-breaker gets ki

Re: [WISPA] When the power goes off

2014-11-10 Thread Tim Way
Using a UPS that maintains Internet access it can be setup to send an SNMP trap that a monitoring system (ZenOSS/SolarWinss/etc) can generate an EMAIL or text message from. On Nov 10, 2014 9:21 AM, "OOLLC-Support" wrote: > Does anyone have a simple solution for when the circuit-breaker gets > kic

Re: [WISPA] When the power goes off

2014-11-10 Thread Josh Luthman
He wants a phone call... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Nov 10, 2014 at 11:32 AM, Tim Way wrote: > Using a UPS that maintains Internet access it can be setup to send an SNMP > trap that a monitoring system (ZenOSS/SolarWin

Re: [WISPA] When the power goes off

2014-11-10 Thread Mike Hammett
Nobody wants a phone call. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Josh Luthman" To: "WISPA General List" Sent: Monday, November 10, 2014 10:37:42 AM Subject: Re: [WISPA] When the power goes off He wants a p

Re: [WISPA] When the power goes off

2014-11-10 Thread Tim Kerns
or plug a cheap cpe in the ac outlet... run a ping monitor to it... when power is off pings stop.. From: Josh Luthman Sent: Monday, November 10, 2014 7:35 AM To: WISPA General List Subject: Re: [WISPA] When the power goes off Plug in a Sitemonitor and use a battery backup. With Powercode y

[WISPA] Sanity check on APC run time

2014-11-10 Thread Josh Luthman
I have 7 Ubnt devices, roughly 35 watts and one dumb 8 port switch. Figure the load is maybe 50 watts after everything is said and done. APC has 8x 12v*8ah batteries (or 768whr) Shouldn't the run time be closer to 15 hours? I am getting 30-40 minutes. I can't imagine the unit is that power inef

Re: [WISPA] Sanity check on APC run time

2014-11-10 Thread Adair Winter
Have you checked the actual power draw on the ac with something like a kill a watt? On Nov 10, 2014 11:04 AM, "Josh Luthman" wrote: > I have 7 Ubnt devices, roughly 35 watts and one dumb 8 port switch. > Figure the load is maybe 50 watts after everything is said and done. > > APC has 8x 12v*8ah b

Re: [WISPA] Sanity check on APC run time

2014-11-10 Thread Josh Luthman
The APC is pulling 1.87a @ 122v. There's no way 228 watts of Ubnt is on that tower, I figured the rest was keeping the batteries up. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Nov 10, 2014 at 12:06 PM, Adair Winter wrote: > Have you

[WISPA] 3.65 GHz power rules; do you really understand them?

2014-11-10 Thread Patrick Leary
When the FCC issued the Report and Order (3.65 R&O) for the 3650-3700 MHz band in March of 2005, it set power limits in a manner not widely understood by many in the WISP community, as it based the limits for fixed operations on a f

Re: [WISPA] When the power goes off

2014-11-10 Thread Dennis Burgess
Drop in Mikrotik MAP, put it on a IP, and place it on the same circuit with a IP without UPS. When it goes off-line, your monitoring system tells you MAP without UPS is off-line, you know you don't have utility power, what we do if you don't hae sitemonitors etc.. Simple, cheap.. Dennis Burges

Re: [WISPA] When the power goes off

2014-11-10 Thread Dennis Burgess
Screw a phone c all, but text is simple! Dennis Burgess, CTO, Link Technologies, Inc. den...@linktechs.net – 314-735-0270 – www.linktechs.net From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh

Re: [WISPA] When the power goes off

2014-11-10 Thread can...@believewireless.net
Techs can sleep through a txt message though. A little more difficult to sleep through a phone call but I do know it happens. On Mon, Nov 10, 2014 at 2:38 PM, Dennis Burgess wrote: > Screw a phone c all, but text is simple! > > > > Dennis Burgess, CTO, Link Technologies, Inc. > > den...@linktech

Re: [WISPA] When the power goes off

2014-11-10 Thread Dennis Burgess
Yep.. In dude you can set it up to resend alerts every 5 min or whatever till its up, but one way or the other they will sleep though it .lol. Dennis Burgess, CTO, Link Technologies, Inc. den...@linktechs.net - 314-735-0270 - www.linktechs.net

Re: [WISPA] When the power goes off

2014-11-10 Thread Simon Westlake
That's why we use PagerDuty. Supports escalations as well, if the guy really does sleep through a constantly ringing phone for 30 minutes. On 11/10/2014 01:43 PM, can...@believewireless.net wrote: Techs can sleep through a txt message though. A little more difficult to sleep through a phone cal

Re: [WISPA] Wireless Digest, Vol 34, Issue 35

2014-11-10 Thread Jack Lehmann
man/listinfo/wireless -- next part -- An HTML attachment was scrubbed... URL: http://lists.wispa.org/pipermail/wireless/attachments/20141110/8b5ec423/atta chment-0001.html -- Message: 3 Date: Mon, 10 Nov 2014 14:43:43 -0500 From: "

Re: [WISPA] When the power goes off

2014-11-10 Thread Scott
On 11/10/14, 1:43 PM, can...@believewireless.net wrote: > Techs can sleep through a txt message though. A little more difficult to > sleep through a phone call but I do know it happens. > Android - Handcent SMS - Settings - Notification Settings - enable reminders - number of reminders "keep repe

Re: [WISPA] When the power goes off

2014-11-10 Thread Sean Heskett
iOS has had repeat message alerts for years On Monday, November 10, 2014, Scott wrote: > On 11/10/14, 1:43 PM, can...@believewireless.net wrote: > > Techs can sleep through a txt message though. A little more difficult to > > sleep through a phone call but I do know it happens. > > > > Androi

Re: [WISPA] Anyone serving Pompey NY? PR for WISPA

2014-11-10 Thread Jerry Richardson (airCloud)
John, We might be able to help them out with at least 25Mbps. Our coverage locator is here: http://www.aircloudcom.com/internet-availability/ Jerry Richardson airCloud Communications On Sat, Nov 8, 2014 at 6:39 AM, John Thomas wrote: > And I know someone in San Ramon that the business complex

Re: [WISPA] When the power goes off

2014-11-10 Thread Brett Woollum
We use the Prowl application for sending notifications to iPhones. It's really neat app that allows you the send push notifications/alerts to iOS devices. We use it for outage and network alerts. It has one alert tone that keeps beeping for a while and it's super annoying. You can use those fo