[WISPA] UPS Suggestion

Guys, I am looking for a light UPS with SNMP network capabilities. It only needs to run my backhaul radio long enough to transmit a power loss alarm. Anyone have any suggestions??? Tnx -B- ___ Wireless mailing list Wireless@wispa.org http://lists.wis

Re: [WISPA] Rohn 25G plate

If you are not going over the 10' and never intend to 3' deep x 24" square or round.   For bolts use 3/4" x 24" galvanized threaded rod. Bake sure the drain holes at the bottom of the legs are clear and do not have galv blocking them.  Most important is type of soil you are in but at this hei

[WISPA] 10 gig Switch

Anyone have any suggestions for a cheap switch I can plug 10 gig GBIC into and use for testing new 5 and 10 GiGE radios with.  Looking for used, ugly, bulky, etc. Most of all looking for cheap.  Strictly testing. Not real world environment. Tnx Sent from my Verizon, Samsung Galaxy smartphone__

Re: [WISPA] RF Armor Non-Pen Tower

Better make sure someone does some engineering for that roof. You are looking at 500 lbs for the mount and another 1100+ lbs of ballast. And that does not include wind factors... That's a lot of weight... On 10/4/2016 9:12 AM, Matthew Brendle wrote: Has anyone used one of these yet? RF A

Re: [WISPA] WTB 11 ghz link

Gino, What kind of bandwidth are you looking for? I have a new, in box Dragonwave Airpair 170 Mb Full Duplex if you are interested -B- On 8/2/2016 12:17 PM, Gino Villarini wrote: Need a quick cost effective link in 11 ghz: Used Trango or Saf, anyone? *//* */Gino Villarini/* Presi

[WISPA] Cambium PTP 450i Question

Can anyone tell me the firmware for this radio that covers 5.3 and 5.4 band ? Presently have radios that only have 5.1 and 5.8 band. Firmware in the radios is 14.1.1 BHUL450-DES Tnx -B- ___ Wireless mailing list Wireless@wispa.org http://lists.wisp

Re: [WISPA] Tower Climbing Requirements

. A few sites we work on have $10 million GL requirements. You should ask that question before committing to any work. Anything over 6' and you need fall arrest harness and lanyard. Hope that helps and is not confusing the matter. -B- Bob Moldashel On 1/7/2015 1:28 PM, Tim Way wr

Re: [WISPA] Need UPS recommendations

$300 or so > On Dec 1, 2014, at 3:48 PM, Kameron Blomquist > wrote: > > Gino hit the nail on the head for the answer. > > Budget? > > Kameron B. > SightLine Wireless > (503) 967-7222 > www.sightlinewireless.com > > >> On Mon, Dec 1, 2014 at 12:00 PM, Gino Villarini wrote: >> Budget? >>

Re: [WISPA] Solar setup recommendations...

Sorry... I confused this with the wrong thread. I will crawl back in my hole now. > On Dec 1, 2014, at 3:30 PM, Bob M wrote: > > guys. I'm not looking for solar system. I'm not looking for d_c power plant. > I know all about those I'm not looking for that. I'm looking for a stupid >

[WISPA] Transtector ALPU-TSU

I have around 20 of these left over from a project last year. They are new old stock. They are set up with RJ45 jacks for Proxim pinout and also have screw terminals so you can use radios with non-standard config. Will work with 24 and 48 vdc POE. Here is spec sheet: http://www.sidco.com.au/

[WISPA] POE Surge Arrestors

Boys and Girls... I have a large quantity of CAT5 outdoor surge suppressors available. They are sold under the Senao/Engenius/Proxim names. The Senao/Engenius part number is NSA-7500G. The Proxim part number is CPN-235-1. They are GiGe 802.3af compatible and according to the specs with ha

Re: [WISPA] Bucket Truck or Van for Fiber?

Unfortunately a van is not rated to drive and place at the same time. > On Sep 25, 2014, at 4:15 PM, Steve Barnes wrote: > > Van with a Bucket. > > > Steve Barnes > General Manager > PCSWIN.com > Howard LLC. > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >

Re: [WISPA] OT: OTDR recommendations

For what Gino? Fiber? > On Aug 29, 2014, at 3:34 PM, Gino Villarini wrote: > > In the market for a new otdr, what would be the best option? > > > > Gino A. Villarini > President > Aeronet Wireless Broadband Corp. > www.aeronetpr.com > @aeronetpr > > > _

Re: [WISPA] Request for information

If you are talking licensed PtP you don't need a lawyer. If PtMP then that's another dog all together... -B- On 4/21/2014 4:02 PM, Chris Stradtman wrote: Hi all, I've been lurking on this group for a while, and I seem to remember at least one person in this group that is a lawyer tha

[WISPA] UBNT/Win8 Issue....

Anyone know of a known problem and resolution for Win8 machines not connecting with UniFi AP's? ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Referral Needed for Wisp in Boston, MA

Ian I owe you a phone call. Tower stream would be your only real choice in Boston. There are a few others but not at that bandwidth. -B- Bob Moldashel Five Nines Wireless Inc 516-551-1131 Direct On Apr 5, 2014, at 11:25 AM, Ian Framson wrote: > Hi Wisps, > > I have a client

Re: [WISPA] OT Time Clocks...

Monday to get payroll into QuickBooks for direct deposit. We just use a spreadsheet instead of a timecard. On Mar 31, 2014 6:20 PM, "Bob Moldashel" <mailto:lakel...@gbcx.net>> wrote: If they go straight to the customer then that's an issue. My issue is guys fo

Re: [WISPA] OT Time Clocks...

#x27;s one option among many: <http://m.costco.com/Icon-Time-Systems-SB-100-PRO-Employee-Time-Clock.product.11264785.html> http://m.costco.com/Icon-Time-Systems-SB-100-PRO-Employee-Time-Clock.product.11264785.html Doug -- Original message -- From: Bob Mo

[WISPA] OT Time Clocks...

OK This is a little off topic as far as wireless goes but I am looking for a time clock to keep track of employee time. Presently we are on the honor system (and I don't have a problem with that...just too much manual labor for the bookkeeper) and they mark down their own time on a sheet.

Re: [WISPA] Guy Wire Calculator

Guy wire is not that expensive. Do the math, add 10%, cut and go. Throw out the scrap. On Mar 24, 2014, at 11:43 AM, Roger Howard wrote: > Right, or how much you gain by using big grips, turnbuckles, guy wire > brackets and guy posts. It just gets you in the ballpark basically. > > > On

Re: [WISPA] Tower Seminars?

t our sidewalks or our air or our water. Everybody's got a right to use it on the same terms." *From:*wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org>] *On Behalf Of *Bob Molda

Re: [WISPA] Tower Seminars?

Interesting "The trees are bare, leaving the roofs of the intervening buildings exposed. "Out past that grain elevator, if you can see it, that's Rosedale Ridge," he says. "Out there 3.7 miles." Summer is coming.. :-) -B- On 2/26/2014 9:38 PM, Phil Curnutt wrote: http://har

Re: [WISPA] decoy tower

Heith, These are NOT cheap. A few things to consider... 1. Because of the "branches" coming off of the main mast you have increased wind loading which means beefier pole and larger/deeper foundation. 2. At wifi freqs (2.4 and 5 Ghz) there is no real concern. At licensed freqs especially 2

Re: [WISPA] iPerf as a Real-World Performance Simulation Tool

We have seen download/upload irregularities when using it with different types of laptops/processors. Overall it is a good tool. Something to check first is to test laptop to laptop with a cossover cable and see what your results are first. Nothing like chasing a problem that isn't there. -B

Re: [WISPA] Proxim Gigalink 6451R ***SOLD***

---Original Message- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] >> On Behalf Of Bob Moldashel >> Sent: Wednesday, October 23, 2013 10:02 AM >> To: WISPA General List >> Subject: [WISPA] Proxim Gigalink 6451R >> >> I have a link

[WISPA] Proxim Gigalink 6451R

I have a link of Proxim Gigalink that we just removed for a hospital client. They closed the remote clinic this was mounted on so it was no longer needed. Comes with power supplies, documentation, power supplies, and new power connectors. It has fiber interface and 1 Gbps full duplex throughput.

[WISPA] Siklu/Dragonwave 80 Ghz..

OK. So a customer pops up out of no where and says he is interested in one of these links. Does anyone have any positive/negative/neutral comments/experience? On or off list b...@fivenineswireless.com Thanks! -B- Bob Moldashel Five Nines Wireless Inc 516-551-1131 Direct

[WISPA] Cisco 1550 Help....

Anyone on here have any real hands on experience with Cisco's 1550 series equipment? I have some licensing and configuration questions. Offlist b...@fivenineswireless.com Thanks! -B- Bob Moldashel Five Nines Wireless Inc. ___ Wireless mailing

Re: [WISPA] Help identifying this shackle

Well... Two sets of guys wires is not correct either. This tower should have at least 4 levels of guy wire, not 2. Amazingly 25G is extremely resilient to falling. There are several videos on the web of guys dropping these towers and they continue to stand after all the guys are cut. Sou

Re: [WISPA] Help identifying this shackle

rom being adjusted and in case the TB should fail. I also wonder what the guy strand is coming out of the anchor point. Scarey.... -B- Bob Moldashel Five Nines Wireless Inc. 516-551-1131 Direct On 9/16/2013 2:32 PM, LaRoy McCann wrote: Can anyone identify this shackle? I think I hav

Re: [WISPA] Urgent need

replacement with an added premium. What is the issue you are having with it? -B- Bob Moldashel Five Nines Wireless Inc. 516-551-1131 Direct On 9/3/2013 6:30 PM, Robert Clark wrote: We have an urgent need of a exalt Extendair 11 Rc110005 Anyone know where I can get one ASAP We just have one that

[WISPA] Ubiquiti M5 Powerbridge

Anyone have any good or bad things to say about these? I am getting roped into a couple of links and looking for feedback before I marry them to myself. Tnx -B- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wire

Re: [WISPA] Law Enforcement Contact Verification?

Mosaic was at Wispamerica. Who/what are they? On Apr 10, 2013, at 6:45 PM, Clay Stewart wrote: > phishy phishy phishy > > On Wed, Apr 10, 2013 at 6:14 PM, Adam Greene wrote: >> Anyone else receive a “Law Enforcement Contact Verification” email from >> Mosaik Solutions (formerly American

Re: [WISPA] Ubiquiti Rocket Titanium

Yes. But not that large. We use the 7 amp version with the fan for all microwave installs for cell carriers. Metro PCS is one carrier that has 24 vdc power plant. We use the larger unit so it runs super cool. Never had a bad one in over 5 years... Bob On Apr 7, 2013, at 5:07 PM, Clay St

Re: [WISPA] Acros the border services

If you are talking about the same Jaime I know, he is definitely the man to seek out. There are a ton of these links across the border and I doubt many of them are licensed correctly, if at all -B- On Feb 11, 2013, at 8:40 PM, Doug Clark wrote: > > But he aint sayin!<120104j_11sealed_

Re: [WISPA] KY show in April

I might just go just to see Gino's Motorola Startac! On Feb 9, 2013, at 7:40 AM, Jeff Broadwick - Lists wrote: > That hotel is normally twice the WISPA rate...and it's virtually attached to > the conference center. I looked at Hotwire and couldn't find anything more > reasonable nearby. I

Re: [WISPA] Heads up - 2' Arc 5.8 dish antennas

Even the best companies screw up from time to time.. I just got in 10 Gabriel dual polarity dishes that had single pole feed horns. Things happen. They are making it right. -B- On Jan 8, 2013, at 12:23 AM, Doug Clark wrote: > > To mount your AP.. > > > > > ---Original Me

Re: [WISPA] Exalt ExploreAIR PoE and SFP together?

Matt, I believe you can only use the fiber interface when supplying power up coax. Model rc11150. If you get the POE version I believe you are limited to copper interface at the POE module. I will see if I can dig up some info and send to you off list. -B- On 9/27/2012 11:39 AM, Matt Jenk

Re: [WISPA] Question about ISM and UNII

The Commission had a real problem with exclusivity arrangements by carriers similar to this that prevented co-location a few years back. I don't know what the outcome was. Same situation where carriers were saying other landline carriers could not enter a location because they had exclusive ri

Re: [WISPA] Ubiquiti Picostation 2HP Question

ne St Suite 1337 Troy, OH 45373 On Tue, Aug 7, 2012 at 9:51 PM, Bob Moldashel <mailto:lakel...@gbcx.net>> wrote: Furthest left is the Main tab. Only shows statistics and status On 8/7/2012 8:23 PM, Josh Luthman wrote: Farthest left. Not first. Kind of hidden in plain si

Re: [WISPA] Ubiquiti Picostation 2HP Question

t Suite 1337 Troy, OH 45373 On Tue, Aug 7, 2012 at 7:16 PM, Jason Bailey mailto:j284...@yahoo.com>> wrote: What was the previous ap? --- On *Tue, 8/7/12, Bob Moldashel

[WISPA] Ubiquiti Picostation 2HP Question

OK Quick question Have a unit new out of the box will not connect to any subs. Set up as an AP, 20 Mhz channel, 2.4 Ghz channel 1. What am I missing??? Any input is appreciated. -B- ___ Wireless mailing list Wireless@wispa.org http://lists.wis

Re: [WISPA] List Traffic

I guess the filtering system was working good until you guys found out! LOL! On 6/29/2012 11:16 AM, Josh Luthman wrote: No traffic since June 19 for me, specifically wireless@wispa.org Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite

Re: [WISPA] Wireless Network Software

305 663 5518 option 2 Email: supp...@snappydsl.net > > > On 5/30/2012 6:40 PM, Bob Moldashel wrote: >> What is Dio? >> >> >> >> >> On 5/30/2012 5:45 PM, Josh Luthman wrote: >>> Do you mean like Dio or Radio Mobile? >>> >>> Josh Lut

Re: [WISPA] Wireless Network Software

What is Dio? On 5/30/2012 5:45 PM, Josh Luthman wrote: > Do you mean like Dio or Radio Mobile? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Wed, May 30, 2012 at 4:55 PM, Carl Shivers wrote: >> What’s a good wireless diagr

[WISPA] Roaming WiFi...

This brings a whole new meaning to the word "hotspot" http://www.agl-mag.com/newsletter/DB_032612_Homeless.htm?utm_source=March%2C+2012&utm_campaign=March+DAS+Bulletin&utm_medium=email I would love to see someone pitch this idea on Shark Tank -B- _

Re: [WISPA] UBNT AirFiber Radio Pics

That thing definitely wins the ugly antenna award... -B- ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Cabling vendors in NYC

Anixter is right in NJ or Avon Datacom on Long Island On 2/20/2012 6:07 PM, Isaac Wilder wrote: > Does anybody know a vendor in the new york area where I can buy spools > of weatherized, EMF shielded cat5e? I'm looking for something akin to > Level 2 toughcable. I would normally order from lcom

Re: [WISPA] Backhaul Link gone bonkers

Scott, Can you give us an idea of link distance and antennas you are using. Is the 30' piece of LMR400 a "factory made" jumper of did you put the connectors on? Weatherproofing? Lightning arrestors? Pigtail jumpers? Trying to get an idea of what your link budget should be and where you

Re: [WISPA] Kazaa / Skype Founder wants to offer free "FreedomPop" 4G mobile broadband

"It found that 69 of 92, or 75 percent, of receivers tested “experienced harmful interference” at the equivalent of 100 meters (109 yards) from a LightSquared base station." Really? . So what happens to every cell site that they build on that relies on GPS for sync and timing? I like where the

Re: [WISPA] Wispalooza!

011 4:25 PM, Bob Moldashel wrote: Not Latvia! You better not have taken payment in chickens LOL On 10/3/2011 4:07 PM, Rick Harnish wrote: There are people registered from Argentina, Brazil, Mexico, Canada, Latvia, England, Ireland, Thailand, Israel and probably a few other countries.

Re: [WISPA] Wispalooza!

Not Latvia! You better not have taken payment in chickens LOL On 10/3/2011 4:07 PM, Rick Harnish wrote: There are people registered from Argentina, Brazil, Mexico, Canada, Latvia, England, Ireland, Thailand, Israel and probably a few other countries. *From:*wireless-boun...@wispa.o

Re: [WISPA] EHS Guy wire pricing

Depends on the wind loading on the structure. 1/2" is probably overkill unless you are mounting 6'+ dishes. -B- On 10/2/2011 1:28 PM, Dorn Hetzel wrote: The tower is only 180 ft, but it has a 46" face, so I have been advised that 3/8 is probably not enough and that I should plan to use

Re: [WISPA] LIGOWAVE PTP24-2

Not on a 10 Mb channel and not in the 5.4 Ghz band. The distance is too great. If you go to 5.8 GHz. band you will need to use a 32 MHz. channel. -B- On 9/28/2011 1:30 PM, Julius Igugu wrote: Hi, How does this perform under very noisy conditions/interference? I have a UBNT Rocket M5 on

Re: [WISPA] LIGOWAVE PTP24-2

etpr.com> Aeronet Wireless Broadband Corp. 787.273.4143 *From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Bob Moldashel *Sent:* Tuesday, September 27, 2011 7:55 PM *To:* WISPA General List *Subject:* Re: [WISPA] LIGOWAVE PTP24-2 Honestly. Due to repair

Re: [WISPA] LIGOWAVE PTP24-2

he Motorola PTP units did on your tests? Sent from my Motorola Startac... On Sep 27, 2011, at 7:08 PM, "Bob Moldashel" <mailto:lakel...@gbcx.net>> wrote: We have tested several manufacturers radios on 5.4 in the metro NYC area and Exalt is the only manufacturer that has not bla

Re: [WISPA] LIGOWAVE PTP24-2

We have tested several manufacturers radios on 5.4 in the metro NYC area and Exalt is the only manufacturer that has not blacklisted channels or shut down on false DFS hits related to noise. There are others but this is my preference. Exalt (EX5r) will provide 440 Mbps on a 64 MHz. channel. Si

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

r Licensed 24 ? Gino A. Villarini g...@aeronetpr.com <mailto:g...@aeronetpr.com> Aeronet Wireless Broadband Corp. 787.273.4143 *From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Bob Moldashel *Sent:* Wednesday, July 27, 2011 10:25 PM *To:* wireless@

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

tpr.com > Aeronet Wireless Broadband Corp. > 787.273.4143 > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Bob Moldashel > Sent: Wednesday, July 27, 2011 10:17 PM > To: WISPA General List > Subject:

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

. On Jul 27, 2011 10:09 PM, "Bob Moldashel" <mailto:lakel...@gbcx.net>> wrote: > Anything from 1' on up. It has same characteristics of 23 Ghz. Radio > snaps on the back of the antenna. > > Need to do the path analysis. +10 dB tx and - 66 dB threshold. > >

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

l Message- > From: wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org>] On Behalf Of Bob Moldashel > Sent: Wednesday, July 27, 2011 10:05 PM > To: WISPA General List > Subject: Re: [WISPA] inexpensive

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

t; > Aeronet Wireless Broadband Corp. > 787.273.4143 > > -Original Message- > From: wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org>] On Behalf Of Bob Moldashel > Sent: Wednesday, July 27,

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

t Wireless Broadband Corp. > 787.273.4143 > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Bob Moldashel > Sent: Wednesday, July 27, 2011 10:05 PM > To: WISPA General List > Subject: Re: [WISPA] inexpensive non-

Re: [WISPA] inexpensive non-2.4/5.8 backhaul?

The Snaplink only does about 22 Mbps. Exalt just came out with a 24 Ghz. Full Duplex TDD radio that will do 100 Mbps and is capable of 3 non-overlapping channels. The price is the same or cheaper. I believe its 2 year warranty also. -B- On 7/27/2011 7:23 PM, Adam Greene wrote: > Has any

Re: [WISPA] Ubiquiti Unifi

& WISP Support Services > Office: 314-735-0270 Website: http://www.linktechs.net > LIVE On-Line Mikrotik Training - Author of "Learn RouterOS" > > >> -Original Message- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] >> On

[WISPA] Ubiquiti Unifi

Any comments? Good, bad , otherwise.. Other than they are harder to get than a Apple iPad in Afganistan Tnx -B- WISPA Wants You! Join today! http://signup.wispa.org/ -

Re: [WISPA] Rope

e fall distance of a 300 lb person a distance of 6 feet without causing death or significant injury". Hope that helps -B- On 4/27/2011 8:49 PM, Josh Luthman wrote: So NFPA sticker is the only thing? 100% of them are good? On Apr 27, 2011 8:42 PM, "Bob Moldashel"

Re: [WISPA] Rope

They are more expensive but I never sell safety short especially for a few hundred dollars. -B- On 4/27/2011 8:36 PM, Josh Luthman wrote: What constitutes lifeline worthy? On Apr 27, 2011 8:24 PM, "Bob Moldashel" <mailto:lakel...@gbcx.net>> wrote: > NO > &

Re: [WISPA] Rope

NO On 4/27/2011 4:45 PM, can...@believewireless.net wrote: Can the 1/2" Arborist Rope be used as a lifeline? WISPA Wants You! Join today! http://signup.wispa.org/ -

Re: [WISPA] Isolated 24V to 48V DC/DC converter

We tried the Meanwell SD-200B-48 upconverters and had issues with them running hot to the touch. Upgraded to the SD-350B-48 with the built-in fan and they run like a charm. No failures to date. $100 vs $120. You can order online from Powergate. Real fast ship and they don't gouge on the shi

Re: [WISPA] Cat5E

There are a handful of listings on E-Bay. Just do a search for aerial cat5. http://cgi.ebay.com/250-CAT-5E-OUTDOOR-AERIAL-SELF-SUPPORTING-W-MESSENGER-/360248674569?pt=LH_DefaultDomain_0&hash=item53e07e8909 On 4/10/2011 5:05 PM, Blair Davis wrote: > Looking for an aerial, shielded, Cat5E with s

Re: [WISPA] Always climb with a buddy......

I find that statement interesting coming from a Marine. ;-) NOTHING surprises me much now a days. -B- Sent via DROID on Verizon Wireless -Original message- From: "St. Louis Broadband" To: 'WISPA General List' Sent: Thu, Mar 17, 2011 16:24:43 GMT+00:00 Subject: Re: [WISPA] Always clim

Re: [WISPA] Always climb with a buddy......

He took the elevator up to the top work platform. The tower has an elevator within the center of the structure. The blunt trauma is probably from falling from above and landing on the platform. Sent via DROID on Verizon Wireless -Original message- From: Chuck Hogg To: WISPA Ge

[WISPA] Always climb with a buddy......

http://www.agl-mag.com/newsletter/AB_031511_Oak_Park.htm WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: w

[WISPA] Engenius ECB-3500 Comments??

Anyone use this or have an opinion about its reliability, coverage, etc. Is it going to work or do I need to reboot it every 10 minutes or...? Need to provide a high powered indoor router for a client and this is what he "likes" Tnx -B- -

Re: [WISPA] Wireless Cameras and wireless network.

Scottie, This is not an issue but I would not use 2.4 GHz. You need to consider marina WiFi. If you have LOS use 5 Ghz. It will handle 1/2 mile with no issues and the water won't be an issue unless the radios fall into the water. You can use standard CCTV analog cameras but will need an encod

Re: [WISPA] 5.2Ghz

Proxim 5054. About 22 Mbps Sent via DROID on Verizon Wireless -Original message- From: Matt To: WISPA General List Sent: Tue, Feb 22, 2011 21:50:10 GMT+00:00 Subject: [WISPA] 5.2Ghz I have some short less then mile hops that I would like to use ~5.2Ghz to avoid interfering with exist

Re: [WISPA] Puerto Rico - $25,000 FCC TDWR Enforcement Action

They will turn it over to legal who will knock it down to $ 2,500. Just the cost of doing business. That is the second incident of interference I am aware of in Puerto Rico that involved Canopy. On 2/19/2011 8:46 AM, rwf wrote: The interesting thing is who they were: none other than AT&T

Re: [WISPA] Obama want to control the wireless world

d 50 gallons of jello to put in our leather pants! marco On Thu, Feb 10, 2011 at 5:02 PM, Bob Moldashel <mailto:lakel...@gbcx.net>> wrote: $10 billion dollars for a national broadband system for Public Safety??? Hahahaha Motorola will eat that up just putting

Re: [WISPA] Obama want to control the wireless world

$10 billion dollars for a national broadband system for Public Safety??? Hahahaha Motorola will eat that up just putting equipment in for NYC, Chicago, LA, Dallas, Miami, and Washington DC. Prevailing wage and union labor will chew that up so fast it won't be funny. Just like that oth

[WISPA] Proflex 195 cable

Can anyone tell me if LMR195 N connectors will work on this cable? I am assuming no because Proflex is usually a little larger than regular cable but what do I know. WISPA Wants You! Join today! http://signup.wisp

[WISPA] Proflex 195 cable

Can anyone tell me if LMR195 N connectors will work on this cable? I am assuming no because Proflex is usually a little larger than regular cable but what do I know. WISPA Wants You! Join today! http://signup.wisp

Re: [WISPA] Nera 11ghz Licensed

same frequency) support, both good things for the original poster... but on GigE isn't Dragonwave Quantum a bit better than Nera/Ceragon ? Rubens On Sat, Feb 5, 2011 at 4:58 PM, Bob Moldashel wrote: > Nera was just purchased by Ceragon.  That may be a good thing or a bad thing > >

Re: [WISPA] Nera 11ghz Licensed

Nera was just purchased by Ceragon. That may be a good thing or a bad thing Sent via DROID on Verizon Wireless -Original message- From: Matt To: WISPA General List Sent: Sat, Feb 5, 2011 18:37:16 GMT+00:00 Subject: [WISPA] Nera 11ghz Licensed Anyone using Nera gear out there? I hear

Re: [WISPA] OT: Eqypt Has Been Disconnected from the Internet

Now if we could just get Nigeria and Romania to have an uprising the Internet would be safe once again! BTW. Great article this month in 2843$ '!=!<8"3 !+975 ! _856 8" Romania that has more Western Union offices than New York has Starbucks all due to Internet scams Sent via DROID on Veriz

Re: [WISPA] strange dragonwave message

Radio is drawing too much current possibly a bad transmitter or some other issue within the radio. -B- Sent via DROID on Verizon Wireless -Original message- From: Don Grossman To: wireless@wispa.org Sent: Thu, Jan 27, 2011 01:49:16 GMT+00:00 Subject: [WISPA] strange dragonwave messag

Re: [WISPA] 5.2 or 5.4 Short Hops

How much bandwidth and what is your price point? There is Exalt Comm EX5r series which works great. There are others but they have various DFS qualities and some false on noise which they mistake for DFS hits. -B- On 1/20/2011 5:00 PM, Jerry Richardson wrote: > If you want DFS2 legal the o

Re: [WISPA] wires, wires, & more wires!

Looks like Marlon doing DSL ! LOL! On 1/13/2011 10:34 PM, RickG wrote: See attached. I wonder which country that is? -- -RickG WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] 11Ghz Licensing Warning Question

FYI There are a lot cheaper coordinators out there than Comsearch. This is like buying a Escalade and then buying replacement tires from the dealer. Just a comment... -B- On 1/7/2011 7:54 AM, michael mulcay wrote: Adaptive modulation is the subject of an FCC NPRM WT Docket 10-153. Can

Re: [WISPA] 21" to 19" Rack Adapters

Anixter and graybar both have them but they are pricey Sent via DROID on Verizon Wireless -Original message- From: "can...@believewireless.net" To: WISPA General List Sent: Wed, Dec 22, 2010 21:17:22 GMT+00:00 Subject: [WISPA] 21" to 19" Rack Adapters Does anyone know where to get the

Re: [WISPA] Flexible rules promised for wireless

Excuse me but is your signature big enough on this e-mail?? :-) regarding this FCC thing... Some how, some way this thing will bite us in the butt and reward the big guys. -B- On 12/20/2010 8:05 PM, St. Louis Broadband wrote: Yes it is! *Victoria Proffer - President/CEO* www.Sho

Re: [WISPA] High Power RF close-proximity on tower question

Filtering is pretty moot when you consider they are in plastic housings with no significant shielding :-) -B- On 12/20/2010 6:31 PM, Leon D. Zetekoff wrote: > On 12/20/2010 05:56 PM, Jack Unger wrote: >> There is QUITE a difference between a separation distance of 20 ft and a >> separati

Re: [WISPA] where is Meraki a good fit?

My experience with Meraki is they come in and run backhaul links on 40 Mhz. channels regardless of what bandwidth is going out the other end. You could have 1 workstation and they run 40 MHz. channels. They are not a frequency efficient company when they pollute spectrum the way they do. Not

Re: [WISPA] WWL Cruise

Yeah... 250 minutes at 80 Kbps of throughput On 11/19/2010 5:11 PM, Kevin Neal wrote: > Cheapest plan (250 minutes) was $0.40 per minute.otherwise you had > 100 minute packages at $0.55 per minute or pay as you go $0.75 per > minute... > > -Kevin > > On Wed, Nov 17, 2010 at 7:00 AM, Rick H

Re: [WISPA] Frequency Coordinators

Why are you contacting a frequency coordinator? They can't help you with anything in 5 Ghz. What is the issue? -B- On 11/19/2010 5:07 PM, Jeromie Reeves wrote: > Anyone have a list of coordinators in the Pacific North West? Ive not > heard back from the one I tried to contact about the evil

Re: [WISPA] 5 gig antennas

WOW! I remember the days when everyone used to ask you these questions.. On 11/15/2010 1:42 PM, Marlon K. Schafer wrote: > Hi All, > > I need a 5 gig omni. 8 or 9 dB. > > I've got one from Winncomm but I don't like it much. The mount seems to > place the raydome below the mounting brac

Re: [WISPA] Climbing High-Angle Emergency Equipment

1/2" Kernmantle Rope. Get something with a NFPA rating. Don't skimp and do 7/16" just because of ratings. And don't use it for anything else other than life safety Sent via DROID on Verizon Wireless -Original message- From: RickG To: WISPA General List Sent: Fri, Nov 12, 2010 16

Re: [WISPA] Licensed 11ghz Link Issues, Need Advice

Bill You can bang the physical dish up pretty good and not need to worry. The feedhorn is the most critical unit. Which Dragonwave radio are you using? Sent via DROID on Verizon Wireless -Original message- From: Brad Belton To: 'WISPA General List' Sent: Fri, Nov 5, 2010 13:38:55

Re: [WISPA] Licensed 11ghz Hops

Ceragon today is NOT the same Ceragon it was 3 years ago. Unlike many here when it comes to choosing equipment I don't chase the price point. I look at who supplies the outstanding support. I look for the company that has my back when I am up against the wall with a dead link. And until so

Re: [WISPA] Looking for a real tower????

or a real tower > > > >> Look at 186, too. It is a tower "almost identical" to 170. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >>

  1   2   3   4   >