Yes .NET 4.0 client profile is part of .NET framework 4.0, however not
sure about VSTOR 4.0.
-Original Message-
From: rahul.ekb...@sungard.com [mailto:rahul.ekb...@sungard.com]
Sent: Thursday, October 21, 2010 3:06 PM
To: wix-users@lists.sourceforge.net
Subject: [WiX-users] About .NET 4.
Hi,
Currently we are migrating from .NET 3.5 sp1 to .NET 4.0.
In our current installer, pre requisites are .NET 3.5sp1, .NET 3.0
client profile and VSTOR 3.0
Now after adding .NET 4.0 can I require to upgrade .NET 4.0 client
profile and VSTOR 4.0? or .NET framework 4.0 contains these elements
Hey Thanks Nick,
It is really good one. I was thinking to chang the whole dialog only for
changing the text. .wxl file is really good solution.
Thanks,
Rahul.
-Original Message-
From: Nick Ramirez [mailto:nickra...@hotmail.com]
Sent: Monday, August 09, 2010 11:04 PM
To: wix-users@lists.
Hi,
We want to change the button text from the existing dialog box.
e.g I want to change the button text from Typical, Custom, Complete to
some "Engine","GUI","All".
Can we make this kind of changes. I found the .wxs code for the same
NOTE- Here I don't want to create separate dialog box for t
Hi,
Windows 2008 is with very high security. So please check do you have
permissions on registry, folder (drive), temp folder etc.
Thanks,
Rahul
-Original Message-
From: Sanjay Rao [mailto:s...@noida.interrasystems.com]
Sent: Thursday, August 05, 2010 5:00 PM
To: General discussion for W
Hi ,
In my installer I am installing windows service. If the service fails
to install or start my installer roll back all the installation. Can
anyone let me know how to proceed or complete installation though the
service fails.
This is my wix code
Hi,
The problem is solved XP machines but same previledge error I am getting for
Windows 2008 server machine. Is there any other settings need to be done.
Thanks,
Rahul
-Original Message-
From: rahul.ekb...@sungard.com [mailto:rahul.ekb...@sungard.com]
Sent: Wednesday, July 28, 2010 1
Hi,
Thanks. You are right. I removed these two line and still it worked. I think I
made 3-4 changes at a time so thought it might be correct fix. Thanks again.
Rahul
-Original Message-
From: Christopher Painter [mailto:chr...@deploymentengineering.com]
Sent: Tuesday, July 27, 2010 5:49
Hi,
Thanks for reply. I really like your techniques :)
I solved this problem by following way.
I figured out the differences in registry after installing service manually. I
found following entries
I added these entries in my wix file followed by
Hi,
No after removing whole ServiceControl component I am getting same
message during service install. I am not understanding is it really
permission issue or I am missing some service components like registry
entries, dependency or dependent files. My works properly when I use
CnvRemoteService.ex
Hi,
I am getting following error during installing the windows service
"Verify that you have sufficient privilege to install system services"
My WIX code is
Can any one knows what I need to change
Hi,
Thanks for reply. Actually I want to register our com exe. We are using heat to
create the .wxs file. It contains the information about class and interface ids
but still it is not registering. We want to see our COM exes into dcomcnfg. Our
COM exes only showing in dcomcinfg after using RegSe
Hi,
I am running following custom action which runs /RegServer command.
I am ruunig msi using command line msiexec.exe /i installer.msi
/L*v c: install.txt
However I am not seeing what exactly command executed by my custom
action. Can anyone know how to
Hi Bryan,
Sorry for late reply. I was on leave.
This problem is defiantly with office hot fix. On our customer side this
problem is not exists because they have all latest office hot fixes.
However we are still trying to find which hot fix solves this issue.
Yes the hotfix is working fine on other
Hey Thanks Bryan,
Now after making changes and installing kb976477 I am able to see add-in
in excel-add-in option however it is giving me another problem, it is
disappearing menu add-in from excel menu bar.
To resolve this I added kb980210 but it not working. So currently I am
struggling to bring t
Hi Bryan,
Any update on this issue?
Thanks,
Rahul
-Original Message-
From: rahul.ekb...@sungard.com [mailto:rahul.ekb...@sungard.com]
Sent: Tuesday, June 01, 2010 8:51 PM
To: wix-users@lists.sourceforge.net
Subject: Re: [WiX-users] VSTO excel Add in for all users
Hi Bryan,
Thanks for re
Hi Bryan,
Thanks for reply.
I checked on XP, the hotfix works properly and after changing
EnableLocalMachineVSTO = 1 in registry key the add-ins are visible for other
users too. It means our Wix installer working properly. Now the main problem is
with only the Hotfix on windows 2008 server R2 64
Hi,
Also please check this .wxs file and let me know if I am doing anything
wrong.
Still I need to create separate installer for the same?
Thanks,
Rahul
-Original Message-
From: rahul.ekb...@sungard.com [mailto:rahul.ekb...@sungard.com]
Sent: Tuesday, June 01, 2010 3:03 PM
To: wix-users@
Ok Thanks. I will wait for your reply.
Thanks,
Rahul
-Original Message-
From: Bryan Reich [mailto:bryan.re...@microsoft.com]
Sent: Tuesday, June 01, 2010 1:25 PM
To: General discussion for Windows Installer XML toolset.
Subject: Re: [WiX-users] VSTO excel Add in for all users
Here is t
Hi,
Please find the excel error. This error occurs when I starts excel. If I
removed this hotfix excel opens properly. This is happening on clean
machine without any com addin. We have office 2007 sp2. It shows
excel.exe*32 in task manager.
These are the error details
Problem signature:
Pro
Is there any solution? its really urgent.
Thanks,
Rahul
From: rahul.ekb...@sungard.com [mailto:rahul.ekb...@sungard.com]
Sent: Fri 5/28/2010 3:07 PM
To: wix-users@lists.sourceforge.net
Subject: Re: [WiX-users] VSTO excel Add in for all users
I am using Office
I am using Office 2007. We found problem on Windows 2008 server after
installing patch KB976477 excel not starts.
I also created separate installer but it not installs the add in for all
user. I am going to try
HKLM\Software\Microsoft\Office\12.0\Common\General\EnableLocalMachineVST
O = 1. Option
Hi,
We are facing installation problem for VSTO excel add in on Windows 2008
server
The addin we are registering is available only for admin user and not
for non admin user.
We changed the registration key from HKCU to HKLM still the add ins are
not available.
Is any one faced same problem?
Als
Hi,
We need to add SQL client components as custom prerequisites in our wix
installer.
If we need x64 versions of SQL components on 64 bit computers or because
our product is running on 32 bit subsystem we just need x86.
Thanks
Rahul Ekbote
Hi,
Download the tool BMG (Bootstapper manifest generator).
Give your .msi and select the pre requisite from list. If not in list download
from net.
Hope it solves your problem
Thanks,
Rahul.
From: Lisa Gracias [mailto:lisathelugubri...@gmail.com]
Sent: Wed 2/2
Got the solution.
msiexec /i IniTest.msi /quiet PIDKEY="Key through command line
parameter"
Thanks,
Rahul.
-Original Message-
From: rahul.ekb...@sungard.com [mailto:rahul.ekb...@sungard.com]
Sent: Tuesday, February 23, 2010 12:11 PM
To: wix-users@lists.sourceforge.net
Subject: [WiX-us
Hi,
I want to pass license key parameter through silent installation.
1) In our installer we are taking license key from user.
2) For internally we are doing silent installation (using .bat
file)
3) However in this case the license key that we are storing in
registry becomes
Hi,
No I not tried for ClickOnce. I completed my installer in Wix and need
to install all the pre-requisite. On net I got tool BMG(Bootstrapper
manifest generator) and using this I am able to install my product with
all pre requisites. However I just want to know which one is better from
these thre
Hi,
Before installing our product I need to check .NET 3.5 SP1 on user
machie. If it is not there then our installer will first install .NET
3.5 sp1 and then our produce.
I have two choices here
1) Using Microsoft Bootstrapper (Bootstrapper manifest generator)
2) Using merge module (.
Hi,
How can I read and write values into .ini file.
Thanks,
Rahul Ekbote
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
Hi,
I am looking for some documentation which shows where to mention WIX_TEMP it.
I added WIX_TEMP in our System properties-Advanced-System Environment. like
WIX_TEMP d:\temp.
When I installed our product and checked folder d:\temp its empty. Installer
copied files in TEMP folder and not in W
Hi,
Do we have any documentation for the this one. I search on net and find only
one line description in light.exe /?.
I tried to set environment variable WIX_TEMP and tried however it not worked.
Thanks,
Rahul.
From: Blair [mailto:os...@live.com]
Sent: Tue 1
Hi all,
Can any one know what is WIX_TEMP. How can we reset its value in our WIX
project or it can setup only through environment window.
Thanks,
Rahul.
--
Let Crystal Reports handle the reporting - Free Crystal Rep
Hi All,
When we installs our product, though we choose other drive like d: or e: still
it checks the space of c: drive. It asks minumn 700MB empty space on c: drive.
I tried to change the temp location to d:\ but no use and I think we not force
user to change his temp folder location.
Please
Hi,
I have 2 machines with me. One is development and other is testing machine. I
am making build on development machine. However Installshield 2008 was
installed on machine but I made the build using Wix. From long time I not using
the Installshield from my machine.
1) To show the Webex to my c
Hi,
Thanks for reply. It is the same problem I am facing with my installer. I read
the article however I am not very clear for solution for Wix. The hot fix given
is for Installshield. How to apply it for wix. How to find Registry Table for
the Wix. Please reply me. From 10 days I am working on
Hi,
I am facing problem that when I am un-installing our product it resets
the TCP/IP settings of the machine.
These are the steps I am using to create the installer
1) We have tradition setup for our engine which is created in
Installshield
2) I am running that installer on my machin
Hi,
We have some ATL .exe files that needs to register. In our old installer
its shows
Self-Register: C:\BancWare\ALMENG~1\DISTRI~1.EXE
However in wix installer it only copies the file into the disk. How to
register these kind of .exes.
Thanks,
Rahul Ekbote
Senior Software Engineer * S
From: Ekbote, Rahul
Sent: Tuesday, June 16, 2009 1:52 PM
To: General discussion for Windows Installer XML toolset.
Subject: Needs to understand how wix register the .dll or .ocx?
Hi,
I want to understand how wix registers the components in registry.
When I run the heat .exe for files
Hi,
I want to understand how wix registers the components in registry.
When I run the heat .exe for files it generates code like.
Hi,
Can we create installer for Java based projects using Wix. How it is
feasible compare to other Java installer?
Can it works for following requirements
1) Installing latest java version on user's machine.
2) Calling some service which is dependent on .jar files or calls
.jar file?
Hi,
When we use heat it creates the registration information. So what is
useful to use heat or Registry table.
How to register .dll files using Registry table.
There is attribute neveroveride and permanent in component element, When
to use that attributes.
-Original Message-
From: Rob Me
Hi,
Yes I am stopping one service from machine. However I was using this code from
1 month and not faced the problem. Only from 4 days I am facing this problem
after adding shortcut and some new office interop files. It is very serious and
I need to format my 2 machines.
Is there any chance rela
Hi,
I am facing very serious and wearied problem. When I am un-installing my
product, my machine's TCP/IP protocol gets rest. It stops all the major
services, stops internet/intranet connections.
It is really very big issue. Did anyone faced this problem still.
I am facing this after I added
Hi,
I have .zip file in my installar. How can I unzip file in current folder
in Wix. Is there any custom action available?
Thanks,
Rahul Ekbote
--
OpenSolaris 2009.06 is a cutting edge operating system for ente
Hi,
I have directory which contains lots of files (around 700 with nested
directories). I build the .wxs using heat command. However I changed lots of
code like directory structure, errors related to interop files etc. The folder
contains lots of .html files for help. Everyday our documentation
Hi,
No still it not works. If I gives the ID of ALMGUI directory it takes only the
name of that directory but not conatnate with the INSTALLDIR. I want full path
of that directory.
Thanks,
Rahul.
From: Bob Arnson [mailto:b...@joyofsetup.com]
Sent: Wed 6/3/20
Hi,
Yes I tried to converting it into the uppercase but not work. It shows the
value in shortcut property
"[INSTALLDIR]ALMGUI" which is like hard code value. It not converts
[INSTALLDIR] into D:\program files\...
I want to concatenate the directory path. It works with "INSTALLDIR" but not
with
Hi,
I want to make shortcut of my application in start-programs. For this I
written following code
However I am facing problem with setting WorkingDirecotry.
My working directory is [INSTAL
Hi,
To more on this topic I have following .msm file in our project
I added VC++ redistributable in bootstrapper. Is it same one? (
Microsoft_VC90_MFC_x86.msm and Microsoft_VC90_CRT_x86.msm )
Thanks,
Rahul.
-Original Message-
From: rahul.ekb...@sungard.com [mailt
Hi Phil,
Thanks for answer. This is my updated code. I made the changes suggested
by you. Still I am getting the same error.
I will check the .log for the same because this code is working f
Hi,
My understanding about .msm is it contains the information to install
the mentioned product. Is it need to provide setup of the products with
our setup? Or it takes from net?
Please correct me if I am wrong.
Thanks,
Rahul.
-Original Message-
From: Wilson, Phil [mailto:phil.wil...@wond
Hi,
Also I am facing error when I am installing my product on fresh machine
Error= "Verify that you have sufficient privileges to start system
service"
On net I find that I have to set Keypath = yes however I already set it
to the service file.
Hi,
I have added merge module in my project. Please see the code from
Product.wxs. However the merge module are not getting install on target
machine.
Also I am using bootstrapper manifest for VS2008 utility for adding
bootstrapper for .net 3.5 sp1 and VC++ redistributable.
Please let me know w
Hi,
I have following code in my .wxs file for installing and starting the
service.
The service is starting properly during install however it taking long
time during un-installation
Is there any problem with service installation code which hangs my un
installation.
Hi,
I created bootstrapper for .net framework 3.5. After building the
project the folder "DotNetFX35" is copying at my output directory.
Now
1) Do we have to distribute this folder with my .msi and setup.exe
2) When I am running my setup.exe on machine the .net framework is
not instal
Hi,
Then is there any other workaround for installing .net 3.5 sp1?
1) Also I added bootstrapper for .net 3.5 but it is not working
I added following code in my .wixproj file
.NET Framework 3.5
Windows Installer 3.1
2) Also for VC++ redistributabl
Hi,
http://wix.sourceforge.net/manual-wix3/install_dotnet.htm.
This is for .NET framework 3.5 and not for .NET framework 3.5 SP1.
Is there anything for .NET framework 3.5 SP1.
Is there any difference between running .msi and .exe
Can I run any other .msi or .exe installation file from our installat
Hi,
In our project we want to run VC++ redistributable file. However when I
runs this .exe from my installer using custom action for this
I gets error "another installer is running". It means we can not call
any other installer from our .msi file
Is there any other way to install vc++ redistrib
Hi,
Is there bootstrapper available for .net 3.5 SP1
Thanks,
Rahul Ekbote
Senior Software Engineer * SunGard * ALM * Bacware *
SunGard Technology Services (India), Meridian Plaza,
S B Road, Shivajinagar, Pune 411016.
Direct Tel +91-20-25606237 * Main Tel +91-20-30238000 * Fax
+91-20-
Hi,
I want to add Product key dialog in WixUI_InstallDir. So I written
Like
1
1
1
LicenseAccepted = "1"
1
Hi,,
I am using following property to read from .ini file
However I think it searches only system folder. The .ini file is part of
my installation and copies on user machine. So how can I search this
one?
Thanks,
Rahul.
-Original Message-
From: Alex Shevchuk [mailto:shevc...@
Hi,
How can I read the text from .ini file and store it into property. I
have .ini file with product version information. I want to read this
information and used to check same version is present on machine or not.
I found the way to write the text into .ini file using
but not found how to r
Hi
In our project, we are copying .reg file on user's machine which we have
to execute after end of the installation.
How can we achive this ? Do we need to do it using Regedit. If yes how
can we call regedit in .wxs file
Also there is one .exe file. How can I get the version information from
Hey Neil, Brian,
It works thanks for your help.
Regards,
Rahul.
-Original Message-
From: Brian Rogers [mailto:rogers.br...@gmail.com]
Sent: Tuesday, May 19, 2009 7:30 PM
To: General discussion for Windows Installer XML toolset.
Subject: Re: [WiX-users] Some general questions about Wix
R
Hi,
Thanks. Ya it takes all the files. However it is creating separate
for each file so do we need to add all these ComponentRef in
tag in main project? Or it creates some component group?
Thanks,
Rhaul.
-Original Message-
From: Neil Sleightholm [mailto:n...@x2systems.com]
Sent: Tuesd
Hi,
I am using Mallow.exe to just copy all the files (.txt, .exe,.dll etc).
I think heat is only for registering the .dll files. Please correct me
if I am wrong.
Thanks,
Rahul
-Original Message-
From: Neil Sleightholm [mailto:n...@x2systems.com]
Sent: Tuesday, May 19, 2009 2:05 PM
To: Ge
Hi,
I used heat3.0 (a) option to create the .wxs file with registry entries.
However I am using Mallow.exe 3.0 to copy the files into TargetDir.
Now the same .dll file entry is there in both files (one for copy and
other for register) now how can I club this in one project. Do I need to
create sepa
Hi,
I am using Wix for basic installation feature
I have following questions
1) I have almost 100 .dll and 300 other files to copy. For this one
I am using Mallow.exe tool. However I have to register these 100 .dll
files so please let me know which is best option
a) Use heat.exe
b)
Hi,
I used Mallow.exe tool to copy the files from the source directory. The
.wsx file generated by mallow contains the code under tag.
..
...
I added this fragment tag in my code however it is not copying the
files mentioned in fragment tag when I run my .msi file.
Please let me
70 matches
Mail list logo