ready in bounds?
*From:*Bill Somerville [mailto:g4...@classdesign.com]
*Sent:* Sunday, July 02, 2017 11:33 AM
*To:* wsjt-devel@lists.sourceforge.net
*Subject:* Re: [wsjt-devel] r7776 Split problem
On 02/07/2017 17:29, Dan Malcolm wrote:
I think I understand, but perhaps I didn’t communicate
I just tested my last reply to you, and it appears I understand "split mode"
better. Thanks.
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: Sunday, July 02, 2017 11:33 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] r7776 Split problem
On 02/07/
2017 11:33 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] r7776 Split problem
On 02/07/2017 17:29, Dan Malcolm wrote:
I think I understand, but perhaps I didn't communicate well. Prior to r7776
the B BFO did the Tx (and A BFO does the Rx) and shifted frequency to
14.07
On 02/07/2017 17:29, Dan Malcolm wrote:
I think I understand, but perhaps I didn’t communicate well. Prior to
r7776 the B BFO did the Tx (and A BFO does the Rx) and shifted
frequency to 14.078.500 as I expected, in compliance with the
recommend split mode setting. Now, Tx still occurs on the B
nd to do that required a 500Hz downshift during Tx.
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: Sunday, July 02, 2017 11:17 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] r7776 Split problem
On 02/07/2017 17:13, Dan Malcolm wrote:
I just compiled r777
On 02/07/2017 17:13, Dan Malcolm wrote:
I just compiled r7776 and found that there is a “split” problem. In
Settings under the Radio tab I have enabled Rig for Split Operation.
I am running Kenwood TS-2000 for the Rig model. That setting has been
working well until I compiled the new WSJT-
I just compiled r7776 and found that there is a "split" problem. In
Settings under the Radio tab I have enabled Rig for Split Operation. I am
running Kenwood TS-2000 for the Rig model. That setting has been working
well until I compiled the new WSJT-X 1.7.1-devel r7776. Prior to this Tx
occurre
