Re: [Xastir] Mac: odd process problem

On Mon, 2 Jul 2007, Chip G. wrote: > A couple of notes. Do not fixate on the kill command format used here. I had > just randomly found that a -4 would at least get it to try and quit (I'm > assuming that's what the parenthesis mean), no other command would even cause > a change. Just for future

Re: [Xastir] Mac: odd process problem

On Mon, 2 Jul 2007, Chip G. wrote: > And locked up again between 9:55PM and 10:08PM while writing the email. It is > completely unusable again on this end, at least on that machine. I'm going to > have to spend an entire day trying to clean things and reinstall everything > again. Reinstall what?

Re: [Xastir] Problem with maps

On Sat, 30 Jun 2007, Tate Belden wrote: > Tom Russo wrote: > > > > You use the "chmod" function to change the permissions (which are > > technically > > known as "file modes," so chmod stands for "CHange MODe"). > > I love the stuff I learn here! Always wondered what was up with that. If you're

Re: [Xastir] Maps

On Mon, 25 Jun 2007, Jason Winningham wrote: > Just wondering if there would be a performance hit going from 8 bit to 24 bit > images if someone were to implement support for 24 bit geotiffs? There might be a small hit, but by that point there's been a lot of math done already, so I doubt it woul

Re: [Xastir] Can you view GPS data?

On Tue, 19 Jun 2007, Steve Friis wrote: > You sure can. Click on In the header of that window you > can select whether it is TNC or Other DATA you want to look at. You also > should check out the other buttons. There is a wealth of information to see > under View. Well, I got that one wrong, did

Re: [Xastir] Seg faults

On Wed, 13 Jun 2007, Steve Friis wrote: > Here is what I have had time to work out. If I have xastir load any online map > other than started when I wanted to use teraserver. Ok. In the case where you _do_ try to use Terraserver, you'll end up with a map.gif or map.jpg in the ~/.xastir/tmp/ dir

Re: [Xastir] New FC7 install troubles with both Release and Stable CVS

On Fri, 8 Jun 2007, Tom Russo wrote: > Without the rtrees, every time you zoom or pan a map, all the shapefiles > in it are searched linearly for shapes that overlap the screen. With rtrees, > a fast lookup can be done to access only those shapes that overlap without > searching through the entir

Re: [Xastir] New FC7 install troubles with both Release and Stable CVS

On Sat, 9 Jun 2007, Tate Belden wrote: > Do you have the X11-devel packages installed? > Do you have the rtree-devel package installed? Good guess on rtree, but all the rtree code is inside Xastir sources, so there are no extra packages to download. Same case with the the Shapefile code these da

Re: [Xastir] snapshots.

On Wed, 6 Jun 2007, John Ronan wrote: > Is anyone having difficulty with the most recent version of xastir from cvs? > > This only started recently, and I'm not sure if its a problem with the raster > image I am using or something else. > > I get an error message of > convert: Improper image hea

Re: [Xastir] Filters?

On Thu, 7 Jun 2007, Earl Needham wrote: > It sounds like you have a good handle on the filter statements, but I > always look at http://www.aprs-is.net/javAPRSSrvr/javaprsfilter.htm to help me > out with them. Just in case anybody else might need it... If the people RTFM in the Xastir do

Re: [Xastir] Caching maps?

On Sun, 3 Jun 2007, Earl Needham via Kubuntu wrote: > Ah -- I'm pretty new in treh Kubuntu world, so I simply did the binary > install. I don't think it gave me any options, it just installed, almost > like a Windows app. I'll have to take a look at what I can do differently. If you loo

Re: [Xastir] No maps or apparent comm with kpc3

On Sun, 3 Jun 2007, Chris Thompson wrote: > the other is i have not seen any traffic from the tnc, the recieve light > comes > on but no visible traffic on the screen. the com port selection is set > to /dev/ttyS0 and set to enable on start up. is this not correct? Are you using the proper sta

Re: [Xastir] Caching maps?

On Sun, 3 Jun 2007, Earl Needham via Kubuntu wrote: > OK, maybe I'm slow, but how do I get Xastir to cache maps so a new map > doesn't need to be downloaded every time I zoom in and than back out to a > former "zoom level"? In other words, if I'm looking at the US Weather map > and zoom

Re: [Xastir] AGWPE

On Sat, 2 Jun 2007, Tom Hayward wrote: > What type of resource does Xastir categorize AGWPE as? A network interface. > I'm virtualizing the OS Xastir is running on, and I get TNC data to > Xastir via an AGWPE network connection. I'd like Xastir to gate > everything it hears from the AGWPE conne

Re: [Xastir] gating weather objects v1.31 vs. 1.90

On Sun, 27 May 2007, Greg Jurrens wrote: > It turns out that in the beginning if you wanted to gate NWS data > out you had to SPECIFICALLY list the event (EWXFFS) for instance. > Then wildcards were added so you could put EWX* in the > nws-stations.txt file. > > Somewhere along the trail, the

Re: [Xastir] no maps

On Sun, 27 May 2007, Lee Bengston wrote: > Thanks for quick reply! I checked ~.xastir/tmp/ and there were no files in > there, so it appears nothing is being fetched. I tried reinstalling > libcurl. I am not familiar with libcurl - what is the syntax for using the > "curl" command to test it ou

Re: [Xastir] no maps

On Sun, 27 May 2007, Lee Bengston wrote: > I just installed the Xastir 1.84 (package from repository) on Ubuntu 7.04, > and I cannot get the online maps to draw. > geo Image Map (ImageMagick library, many formats allowed) > geo URL (Internet maps via libcurl library) That Xastir

Re: [Xastir] gating weather objects v1.31 vs. 1.90

On Sun, 27 May 2007, Greg Jurrens wrote: > I'm guessing NWS gating is being done differently now so I'd > appreciate if someone could point me to the proper methodology for > setting NWS up now. I scanned the WIKI but didn't find anything. > If needed, I'll contribute a "How to update your ancien

Re: [Xastir] minicom/kiss mode

On Sat, 26 May 2007, James Jolin wrote: > Anybody know how I can put my tnc in kiss mode without using minicom? Look at the xastir/scripts/kiss-off script. You should be able to copy it and then modify the copy to make a kiss-on script for your purposes. -- Curt, WE7U.

Re: [Xastir] minicom/kiss mode

On Sat, 26 May 2007, Craig Anderson wrote: > Sounds like it's already in KISS mode. You can try this to get it out. > > echo -e "\300\377\300" > /dev/ttyUSB0 Or for that case, xastir/scripts/kiss-off.pl -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.com/

Re: [Xastir] How to delete Xastir

On Mon, 21 May 2007, Henk Oegema wrote: > I want to completely delete my existing Xastir (except the maps !) before > installing the latest version. > > What is the best way to delete Xastir (in Linux) ? Assuming that it was installed to standard locations: To delete all of the per-user inform

Re: [Xastir] Tiger2006 maps problem?

On Sat, 12 May 2007, Tom Russo wrote: > > I must say that the Online/Tiger2003 maps on a Mac > > look gorgeous! They have nice colors and complete > > fills (oceans that are all blue, as opposed to the Tiger > > 2006 oceans which only go about 3 miles off the coast). > > Is that because it's

Re: [Xastir] interface failures, part 2

On Sat, 5 May 2007, Jason Winningham wrote: > 1 - xastir fails to recognize that _it_ created the lock file, so it's OK to > remove it and restart the interface like I asked. My feeling is this is a > bug. I haven't dealt with this particular problem before, so likely the serial port lock file h

Re: RE: [Xastir] FC6 Install

On Mon, 30 Apr 2007, Bennett, Joe wrote: > Yes I ran the script get-maptools.sh, after I posted the message. I then > complied. Now when I run Xastir I get this: > > [EMAIL PROTECTED] scripts]$ xastir > xastir: error while loading shared libraries: libshp.so.1: cannot open shared > object file:

Re: [Xastir] heard stations as waypoints to GPS?

On Mon, 30 Apr 2007, Jason Winningham wrote: > Does xastir send waypoints corresponding to heard stations to an attached GPS > like the D7/D700 do? Yes, it certainly can. If you have an attached Serial GPS interface and a GPS that understands the sentence (typically Garmin), plus the GPS has an

Re: [Xastir] ancient history question: HK232

On Sun, 11 Mar 2007, mark wrote: > I'll see what those other config files do with this Smithsonian > artifact. It give me a starting place to experiment, and that's what I > really needed. Create your own files in the same directory with different naming from the standard files, then type those

Re: [Xastir] ancient history question: HK232

On Sat, 10 Mar 2007, Bob Nielsen wrote: > I suspect that tnc-startup.aea might be more appropriate, since the HK232 is > really a PK232 in disguise. He specifically talked about adding delays between commands and such, which is one of the things he can learn from the files I mentioned. Once he g

Re: [Xastir] ancient history question: HK232

On Sat, 10 Mar 2007, mark wrote: > The difficulty I've had attempting this is the cute auto-baud 'feature' > of the HK232. At power-up, the HK232 is set for serial comms of 1200 > 7E1. But at 1200, it can require several asterisk character entries > separated by 1-second intervals to get the HK2

Re: [Xastir] problems encountered: Fedora Core 5 install of Xastir

On Wed, 7 Mar 2007, Tom Russo wrote: > > When I enter the command Xastir from a user level (and as root) I get > > this shape library error: > > > > xastir: error while loading shared libraries: libshp.so.1: cannot open > > shared object file: No such file or directory > > This indicates that wh

Re: [Xastir] AX25 interfacing

On Sun, 4 Mar 2007, Lance Cotton wrote: > Xastir needs to be set SUID so that it can open an ax.25 socket. > > try a `chmod 4755 /usr/local/bin/xastir` first Yes. This will get you around possible permissions problems with the ports _and_ the kernel requirement that network protocol access requ

Re: [Xastir] Weird plotting

On Thu, 1 Mar 2007, Tom Russo wrote: > This looks suspiciously like a digi that's holding packets too long before > digipeating them. Stuff like this has shown up in discussions on APRSSIG > from time to time. My memory's kinda dim on the subject, but as I recall > it is stale packets being re-t

Re: [Xastir] xastir in Ubuntu

On Thu, 1 Mar 2007, Rick Green wrote: > Oops, I spoke too soon. 1.8.5 has the bug which causes the buttons on the > interfaces menu to disappear after adding an interface. Can you suggest a > more recent snapshot worthy of being widely published? Try the same version but with OpenMotif instead

Re: [Xastir] Tiger 2006 files as shapefiles

On Mon, 19 Feb 2007, Gerry Creager wrote: > Correct. Made the change and forgot to send the notice out here. > KC7ZRU - Tate wrote: > > > > Gerry, I think you meant: > > > > ftp://aprs.tamu.edu/pub/TIGER2006 - no? So... Are the Ireland, OK, and TX sites listed on the Maps Wiki yet? Anyone c

Re: [Xastir] KAM+ and AX25

On Mon, 19 Feb 2007, Kevin Hogan wrote: > As it stands right now I can turn on one port for Tx and get Rx on both > ports. Yea, cuz you're sending a 0x00 for the port number during transmit, which will select only one port. > > For a MKISS setup you end up telling Xastir on a per-interface basi

Re: [Xastir] KAM+ and AX25

On Mon, 19 Feb 2007, Kevin Hogan wrote: > Is there a way to run both HF and VHF from Xastir? Kind'a yea. > Do I need to install AX25 to run the KAM+ with both ports able to > transmit? I don't want to run the KAM and TNC on 2 serial ports. You can run it one one port, you can change paths on a

Re: [Xastir] Tiger 2006 files as shapefiles

On Sun, 18 Feb 2007, Tim Gimmel wrote: > I know I'm supposed to know this, but I can't remember, since the > filenames from the TIGER2006 seem to be in FIPS and County code format, > which .dbfawk will match by default; or is it the first one it finds > with a matching signature? It'll use a file

Re: [Xastir] Which distrro are you using

On Sat, 17 Feb 2007, James Jolin wrote: > I am taking a poll. Which linux distro are you guys using? OpenSuSE 10.0 on Home P200/128MB RAM machine OpenSuSE 10.0 on laptop OpenSuSE 10.0 on Work machine OpenSuSE 9.x on touch-screen Jeep computer I sometimes still run Slackware on my older machines

Re: [Xastir] Is it me or is there a problem with Weather Alert...

On Sun, 11 Feb 2007, Richard, N6NKO wrote: > I believe that the server was called "wxsvr" and I thought that there was an > icon making known it existence in the Gulf of Mexico. I tried looking for it > with no luck. There's a file, I think distributed with Xastir, that has example weather alerts

Re: [Xastir] Is it me or is there a problem with Weather Alert...

On Sun, 11 Feb 2007, Richard, N6NKO wrote: > I seem to be devoid of county weather alerts coming in off of Level2 APRS > feeds. > > Is it me or the network? Did you manually download the Shapefiles from NOAA for this, or run the script that snags them for you? Check in your /usr/local/share/xas

Re: [Xastir] Davis weather station install

On Sat, 10 Feb 2007, Steve Friis wrote: > OK, I might be missing it, but I am not finding instructions to install this > weather station. Is there a concise step-by-step somewhere I am missing? I haven't installed a Davis, but a Lacrosse station which should be a similar setup (MySQL, separate sh

[Xastir] New function, "Home" key

For those of you who who don't keep track of CVS commits, I added a new function last night and attached it to the "Home" key on the keyboard. Press "Home" and the map will center on your position. This makes it easier to roam out and look at others, then just press "Home" to return. Zoom level

Re: [Xastir] Canada Toporama Maps

On Sat, 10 Feb 2007, Gerry Creager wrote: > I'm about to embark on a bit of mapserver work, and this is likely as good a > time as any to learn how to tile in gdal. Just so you and Steve are aware of this, a bit more Toporama stuff: Tom Tessier said this: > "... I found errors in their maps des

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Tom Tessier wrote: > Oops, sorry Curt, I see that your point is that you DIDN'T want the whole > country in one shot!! OKI see someone fixed the mapping between position > coordinate and picking the map to get. Yea, you can either download the whole shebang onto your hardd

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Steve Dimse wrote: > Actually that is not the way I work. I spent a lot of time understanding the > way they did it, once I started coding it worked as soon as I fixed a couple > of syntax errors. That is why I don't think the code will help you. If you did > a straight transla

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Steve Dimse wrote: > Yes, I think that is the only way to do it. Even a two by two pixel map could > (in the extreme case) require loading of four different (and large) tiles, > could xastir handle that directly? Nope. Our code's stupid. It want's one image and one image onl

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Steve Dimse wrote: > Just to prove the point that it would not be easier, here is the toporama > cgi... I can understand much of it, but the math is sure thugly! We could toss the DBI stuff 'cuz we don't do it by callsign, but the rest would be necessary. That math is about

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Steve Dimse wrote: > Frankly, if you want to add this to your code and have any hope of maintaining > it, you would be better to go to the Toporama documentation and write your own > code rather than trying to convert my uncommented Perl to C! Yep, figured that out. I _am_ a

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Curt Mills wrote: > Any chance of getting the algorithm for the Toporama CGI so that we > could generate the .geo's ourselves? We'd still be snagging the > actual map images from your server, but if that became a problem in > the future we could come

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Tom ve7did wrote: > I see the on-line Canada maps are humming again. Thx to whoever fixed it. Steve Dimse. -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.com/~archer Lotto: A tax on people who are bad at math. - unknown Windows: M

Re: [Xastir] Canada Toporama Maps

On Fri, 9 Feb 2007, Steve Dimse wrote: > I found the problem and should have it fixed now, it was a problem with names > resolving to different servers. Thanks. Had to change our sources back to what they were yesterday. The CVS commit is happening now. Any chance of getting the algorithm for t

Re: [Xastir] Davis software install

On Fri, 9 Feb 2007, Steve wrote: > I am trying to get working the Davis Vantage Pro2 so that I can post the local > WX conditions on the net. Following the instructions in the README file, I > installed the mysql software. When I try to run mysql however, I get the > following error... > > ERROR

Re: [Xastir] Canada Toporama Maps

On Wed, 7 Feb 2007, Curt Mills wrote: > On Thu, 8 Feb 2007, Jeff Brower wrote: > > > I have the same problem on my Mac and on a Kubuntu build. Like you, it has > > been that way for a few weeks. Perhaps the path has changed? > > As I recall we do something funny for t

Re: [Xastir] Canada Toporama Maps

On Thu, 8 Feb 2007, Jeff Brower wrote: > I have the same problem on my Mac and on a Kubuntu build. Like you, it has > been that way for a few weeks. Perhaps the path has changed? As I recall we do something funny for these particular maps. I think we requests the .geo from findu.com, then go fe

Re: [Xastir] Gate Inet to RF using Xastir as client/server

On Wed, 7 Feb 2007, Josh Housey wrote: > I have received a response to enable the "Igate -> RF and RF-> > Igate" functions for the RF port and the default config. I don't > think it worked, but I may have to restart Xastir to see if it > changes anything. Perhaps you missed the tail-end of my re

Re: [Xastir] Maps and ImageMagick

On Tue, 6 Feb 2007, Richard, N6NKO wrote: > In ImageMagick, the command is: "display ..." > In GraphicsMagick, the command is "gm display ..." > > So if there is going to be dependency checking and compensation, then there > will have to be two separate command lines with which one being called b

Re: [Xastir] Slackware 11.0 xastir 1.8.5 build

On Sun, 4 Feb 2007, Richard M wrote: > To prevent reinventing the wheel, does anyone have a Slackware 11.0 Xastir > 1.8.5 tgz package already with all features enabled? I am working with SLAX > to get a boot cd with all features already enabled, and saving all the > default config info to my USB t

Re: [Xastir] Back in business...

On Sat, 27 Jan 2007, Richard, N6NKO wrote: > 1.8.5 is running just fine here. One question though... is xastir.tamu.edu up > still? I was getting timeouts accessing the server this morning. http://www.xastir.org -- Curt, WE7U. archer at eskimo dot com http://www.eski

Re: [Xastir] weather station

On Thu, 18 Jan 2007, Tom Russo wrote: > I had that problem, too. It turns out to be caused by HF transmissions. If > your temperature/hygro sensor is anywhere near your HF antennas it'll > get bogus rainfall information. For what it's worth the rain sensor is a plastic tipping bucket type with

Re: [Xastir] segfault

On Fri, 12 Jan 2007, Tom Russo wrote: > > At this URL: > > > > > > > > They do a check for "LESSTIF_VERSION": > > > > > > - if test "$have_motif" = "yes"; then > > -dnl autodetect lesstif > > -AC_MSG_CHE

Re: [Xastir] Broken

On Wed, 10 Jan 2007, Chip G. wrote: > > What does your top-level Makefile show for the CPPFLAGS line after you run > > configure? > > Umm ... there is no CPPFLAGS line in my Makefile or Makefile.in or Makefile.am > So I know what I should find. Both computers have been updated to CVS. How can >

Re: [Xastir] openmotiff

On Wed, 10 Jan 2007, James Jolin wrote: > Started a new install of xastir 1.8.4 and checked to see if I had all the > necessary stuff. I found that openmotiff devel wasn't installed. So I > checked the box and got the following: > Can't satisfy requirement libXm.so.4 for openmotif-2.3.0beta2-32

Re: [Xastir] Re: Xastir Digest, Vol 18, Issue 8

On Mon, 8 Jan 2007, Victor wrote: > Dana's binary works fine with tigermaps on my 10.4.8 G4. Check the internet > timeout in the config timings pulldown (file/configure/timing) and set it for > at least 120. Select a custom zoom level of about 1024 or less around your > symbol on map and it sho

Re: [Xastir] From the, to the and for the "What it's Worth" dept.

On Sat, 6 Jan 2007, Tate wrote: > And, seems the labels for the timing config sliders are back. Or I've > misplaced how they 'went away' in the first place. Bugs in Lesstif. -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.com/~archer Lotto: A tax on peop

Re: [Xastir] compile error

On Fri, 29 Dec 2006, Mike Fenske wrote: > I haven't seen a compile error with Xastir for a _long_ time, but > with today's CVS, I got one. Looks like the new code Curt has > added tor printing. Running SuSE 7.3 here. Yep. Any time you see some _new_ code get added there's a good possibility that

Re: [Xastir] Re: Xastir Digest, Vol 17, Issue 53

On Fri, 29 Dec 2006, g1ixv wrote: > Got the same error message here on Suse 9.3 That's life on the bleeding edge. Was fixed about the time I saw your message come across. -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.com/~archer Lotto: A tax on people

Re: [Xastir] Inquiry on "main.c"

On Fri, 29 Dec 2006, Chip G. wrote: > I see a number of options which can be configured by un-commenting > some lines and recompiling. Is there a reason why these are not available as > options via the Configure menu? I suppose some might be easier to code based > on changing only at compile-time,

Re: [Xastir] build error - "GV_PATH" undeclared

On Fri, 29 Dec 2006, Dan Brown wrote: > Installing ghostview also appears to have fixed it here. With the latest committed changes I can comment out the lines in config.h that refer to GV or LPR, recompile, and get popup messages when I try to print or print preview. I still need to figure out w

Re: [Xastir] build error - "GV_PATH" undeclared

On Fri, 29 Dec 2006, Curt Mills wrote: > I think something like "#ifdef GV_PATH" and "#ifdef LPR_PATH" will > do it. Am committing fixes to maps.c and xa_config.c that should fix this. -- Curt, WE7U. archer at eskimo dot com http://www.eski

Re: [Xastir] build error - "GV_PATH" undeclared

On Fri, 29 Dec 2006, Dan Brown wrote: > maps.c: In function 'Print_postscript_destroy_shell': > maps.c:3871: error: 'GV_PATH' undeclared (first use in this function) I'm still in the middle of making changes. Actually just started to get worthwhile functionality last night at about 11pm, so comm

Re: [Xastir] VMWare for Mac

On Thu, 28 Dec 2006, Dan Brown wrote: > Of course, between the N1OFZ prebuilt binary and/or the darwin ports > method, installing xastir natively on Tiger isn't awfully difficult. Vmware > may actually complicate matters! Was just thinking in terms of a universal "test" installation that people

[Xastir] VMWare for Mac

I think this is only for the Intel Mac's? Would this make the VMWare Player version of Xastir/Ubuntu play on the mac's too? -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.co

Re: [Xastir] Display Error2

On Thu, 28 Dec 2006, g1ixv wrote: > Warning: >Name: create_appshell text_output2 >Class: XmTextField >Character '\260' not supported in font. Discarded. This is due to your $LANG setting in our shell. It needs to be set to "C" or "en_US". See the Xastir FAQ. -- Curt, WE7U.

Re: [Xastir] Display error

On Thu, 28 Dec 2006, g1ixv wrote: > I compiled up 1.8.4 & 1.8.3 and they still do it on Suse 10.2. Has anyone else > come across this? This is typically a bug in the widget set. If running OpenMotif, try Lesstif instead. If compiling with Lesstif, try OpenMotif instead. You can also try upgrad

Re: [Xastir] Xastir on VMWare Segfault

On Tue, 26 Dec 2006, James Ewen wrote: > Xastir never fails to challenge me! So I'm sitting here trying to figure out whether that's derogatory or a compliment... That makes it a very good comment in any case! -- Curt, WE7U. archer at eskimo dot com http://www.eskim

Re: [Xastir] icon for xastir

On Sun, 24 Dec 2006, Chip G. wrote: > Knowing nothing about unix and icons ... what would it take to make a color > icon available like many other applications? Someone to create it. I think someone else on the list many months ago had created one, or volunteered to create one. The icon.xbm fil

Re: [Xastir] Xastir virtual machine now available for download

On Sun, 24 Dec 2006, Tom Russo wrote: > > Just the instance of Xastir that is running. There's no terminal > > window to have a look at to see what error might have happened. Is it possible that it's the segfault I fixed about two weeks ago? That was a libcurl problem that would cause a segfault

Re: [Xastir] icon for xastir

On Sun, 24 Dec 2006, Tim Cwik wrote: > Does anyone know where to find a .png or other file that can be used as a > panel icon for a Linux Gnome desktop panel? Something close must exist because > Gnome uses the jeep with an antenna as a decoration in the top left corner of > the frame of the xasti

Re: [Xastir] Zoomable Google maps for Xastir ?

On Sun, 24 Dec 2006, Henk Oegema wrote: > My question : Is it possible to use zoom able Google maps online, No. Up until very recently the Google Maps licensing was so restrictive that we couldn't use them at all. At that point they specifically excluded any sort of vehicle tracking. At some p

Re: [Xastir] Station Info dialog change

On Sat, 23 Dec 2006, William McKeehan wrote: > I'm watching a balloon today (WB8ELK-12) and have the Station Info dialog box > up with Automatic Updated enabled. The balloon sends it's battery voltage, > temperature, HDOP and #Sats in view in it's comment, so I have a list of > comments. This list

Re: [Xastir] Transmitting objects

On Thu, 21 Dec 2006, Jason Winningham wrote: > Of course, there's also some spiffy code in xastir that will create objects > and transmit them at a decaying interval. If you're running xastir just check > the timing values (file -> configure -> timing), create your objects, and let > xastir do th

Re: [Xastir] mac osx 10.4.8 Xastir 1.8.5 working here, mostly.

On Wed, 20 Dec 2006, Jason Winningham wrote: > Curt, if you need an account on an OS X machine I can probably arrange it (I > assume you can SSH in and to the X11 forwarding thing). I'd rather that the developers who have OSX machines do the debugging on them. I have my hands full just testing t

Re: [Xastir] OSX & Cygwin test please?

On Wed, 20 Dec 2006, Greg Eigsti wrote: > - If only ImageMagick (MacPorts) is installed configure finds it > - If only GraphicsMagick (MacPorts) is installed configure finds it > - If both are installed configure finds IM if no configure switch is > specified Which means configure searches for GM

Re: [Xastir] OSX & Cygwin test please?

On Wed, 20 Dec 2006, William McKeehan wrote: > That seems to have fixed my issue. > > Now configure finds GM, fails the tests, then finds IM and passes the tests so > it configures to build with IM. Great! -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.co

RE: [Xastir] OSX & Cygwin test please?

On Wed, 20 Dec 2006, AC7YY wrote: > Is GraphicsMagick required to print? I currently have IM configured and > receive an error when trying to print a map. As I recall you need: libXPM (to create the PS file from the pixmap) ImageMagick or Graphicsmagick ("convert" or "gm convert") gv

Re: [Xastir] mac osx 10.4.8 Xastir 1.8.5 working here, mostly.

On Wed, 20 Dec 2006, Tom Russo wrote: > That was probably not the best plan. The code in xastir depends > pretty clearly on using DB 4.x --- there are ifdefs that will > fail to work properly if 5.x is installed. It could even be > the case that some future version of BDB might be incompatible

Re: [Xastir] OSX & Cygwin test please?

On Wed, 20 Dec 2006, Greg Eigsti wrote: > How can I distinguish your latest changes? I sync'ed after your last mail > and still have to remove ImageMagick to get configure to see GraphicsMagick. acinclude.m4 should have a timestamp of today in the "$Id:" tag. You'd then have to run bootstrap.sh

Re: [Xastir] OSX & Cygwin test please?

On Wed, 20 Dec 2006, Greg Eigsti wrote: > Let us know when the changes are in AnonCVS and I'll give a try on PPC OS X > as I was seeing the same issue. These days anonCVS follows develCVS by only a few minutes, so it should have been there quite quickly. That's not always the case, but it's been

Re: [Xastir] mac osx 10.4.8 Xastir 1.8.5 working here, mostly.

On Sat, 16 Dec 2006, Dan Brown wrote: > for dbname in db-4.4 db4.4 db44 db-4.3 db4.3 db43 db-4.2 db4.2 db42 db-4.1 > db4.1 db41 db-4.0 db4.0 db-4 db40 db4 db > > which quite clearly has hardcoded version numbers in it. Losing battle. > Need to rewrite it so it doesn't need berkeley, at some poi

Re: [Xastir] OSX & Cygwin test please?

On Tue, 19 Dec 2006, William McKeehan wrote: > OK, with both GM and IM installed: > > Running ./configure with no arguments, it finds both, but the tests fail and > it builds with neither. > > If I run ./configure --without-graphicsmagick, it finds ImageMagick and builds > with it just fine. I

Re: [Xastir] CVS password

On Wed, 20 Dec 2006, Henk Oegema wrote: > I m trying to install XASTIR via cvs: > > cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/xastir login > > as explained at site http://www.xastir.org/wiki/index.php/HowTo:Ubuntu_6.10 > > When it comes to > CVS password: > I don't know what to type here. If

Re: [Xastir] Xastir as Satgate?

On Tue, 19 Dec 2006, Rick Green wrote: > Over on the aprssig, Bob is calling for additional downlink stations for three > upcoming new APRS satellites. > Since I'm not doing much with the packet station these days, I was thinking > of swinging the radio over to the satellite downlink frequency,

Re: [Xastir] OSX & Cygwin test please?

On Tue, 19 Dec 2006, William McKeehan wrote: > OK, with both GM and IM installed: > > Running ./configure with no arguments, it finds both, but the tests fail and > it builds with neither. > > If I run ./configure --without-graphicsmagick, it finds ImageMagick and builds > with it just fine. Pe

Re: [Xastir] Reporting configure report

On Mon, 18 Dec 2006, Tom Russo wrote: > If the user plans never to use shapefiles, then we should recommend that the > user specifiy "--without-rtree." Six of one, half a dozen of another > right now. > > rtree is a tiny, tiny library, and if shapefiles aren't used then rtree being > compiled in

Re: [Xastir] OSX & Cygwin test please?

On Mon, 18 Dec 2006, William McKeehan wrote: > conftest.c:155: warning: function declaration isn't a prototype > /usr/lib/gcc/i686-pc-cygwin/3.4.4/../../../../i686-pc-cygwin/bin/ld: cannot > find -ldpstk > > Then it went on to test for ImageMagick. It failed with the same error. That one bugs me

Re: [Xastir] More feedback on acinclude.m4/configure.ac?

On Sun, 17 Dec 2006, William McKeehan wrote: > >> /usr/lib/gcc/i686-pc-cygwin/3.4.4/../../../../i686-pc-cygwin/bin/ld: cannot > >> find -ldpstk > > I have not tried a previous version of xorg. Now I remember. Once they fix up the GraphicsMagick Cygwin package then configure should find it ok, e

Re: [Xastir] More feedback on acinclude.m4/configure.ac?

On Sun, 17 Dec 2006, William McKeehan wrote: > On Cygwin if I remove GraphicsMagick. It finds ImageMagick and compiles just > fine. Great! And it compiles with GraphicsMagick just fine if that's installed too? Sorry, don't recall with all the mail I get, and all the little changes I've done to

Re: [Xastir] Need Feedback: CVS, plus LSB Xastir info

On Sun, 17 Dec 2006, Greg Eigsti wrote: > I already communicated this with Curt, the mapcaching/db42 issue was a > typo... I did find that I can only get map-caching on PPC (have not yet > tried MacTel) with the Fink version of db42. > > I look forward to digesting Dan Brown's excellent notes on

Re: [Xastir] mac osx 10.4.8 Xastir 1.8.5 working here, mostly.

On Sat, 16 Dec 2006, N1OFZ wrote: > > Are GM and libDB are Darwinports versions, so they are in > > "/opt/local/" ?? > > They should be. All port packages should be installed in /opt/local. But > whoever built the port for bdb decided that rather than install in > /opt/local/lib they install t

Re: [Xastir] Graphics/Image Magick

On Sat, 16 Dec 2006, Tom Russo wrote: > Separate issue. The transparency code just doesn't work on 8 bit displays. > Someone will have to go through it and debug. Preferrably someone with > access to 8, 16, and 24 bit displays so that the 8-bit fixes don't re-break > the 24-bit stuff (that was

Re: [Xastir] mac osx 10.4.8 Xastir 1.8.5 working here, mostly.

On Sat, 16 Dec 2006, Dan Brown wrote: > Install Darwinports > sudo port install GraphicsMagick > sudo port install db45 Are GM and libDB are Darwinports versions, so they are in "/opt/local/" ?? > edit xastir aclocal.m4 to add 45 versions for libdb (ick, who thought > libdb was a good idea?)

  1   2   >