Dear Billy,

Thank you very much for you suggestions.
I have checked, and I have read/write access to said folders. There are no
messages being shown, eev simply shows the window GUI to select channels or
stations and simply quits the window when it's about to plot the waveform,
just like I had quit the window. It basicly goes back to the eev prompt.
The waveforms are inside the directory, I have checked them, and if I move
them out of their subdirectory directly to the WAV directory I have no
trouble plotting the waveforms and doing whatever I want (phase picking and
locating afterwards for example).
I have recompiled all the programs about 5 times now, PRO and LIB have been
recompiled again just a few minutes ago. The anomaly remains. I guess it's
not a compilation error, but I might be mistaken. The environment variables
are well set.

Best wishes,

Emanuel Antunes
2012/10/3 Billy edson Burgoa Rosso <[email protected]>

> Dear Emanuel,
>
> I would verify if I have access to read the directories or waveforms that
> are in WAV or WOR (command ls -l to check them ). Do you get any messages
> when you run eev for some event and you try to plot it? if you get a
> message similar like this one:
>
> No such file: 2011-11-22-1837-33S.NSN___335_MSEED
>   No waveform files found, return to continue
>
> and the waveform file is inside the directory then you don't have access
> to read it, you must modify the permissions (or it could be that the
> waveform isn't inside the directory!) .
>
I would also try to solve this problem recompiling SeisAn; remember that
> the precompiled version is for a specific LINUX flavor (let's say
> CentOS...not sure about this). For compiling SeisAn you should have to set
> the enviroment variables in ~/my_seisan_basedir/COM/SEISAN.bash and then
> you have to go to LIB directory and execute "make clean" then "make all".
> Finally, go to the PRO and execute the last two commands.
>
> Regards,
>
>
> Billy Burgoa
>
>   ------------------------------
> *De:* "[email protected]" <[email protected]>
> *Para:* [email protected]
> *Enviado:* MiƩrcoles, 3 de octubre, 2012 12:40 P.M.
> *Asunto:* seisan Digest, Vol 56, Issue 1
>
> Today's Topics:
>
>   1. Unable to access WAV subfolders... (Emanuel Antunes)
>   2. Re: Unable to access WAV subfolders... (Emanuel Antunes)
>   3. Re: Unable to access WAV subfolders... (Branden Christensen)
>   4. Re: Unable to access WAV subfolders... (Emanuel Antunes)
>   5. Re: Unable to access WAV subfolders... (Branden Christensen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 3 Oct 2012 11:42:14 +0100
> From: Emanuel Antunes <[email protected]>
> Subject: [seisan] Unable to access WAV subfolders...
> To: [email protected]
>
> Dear all,
>
>
> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
> reinstalled SEISAN (the latest available version), ran through the usual
> configuration, but I am running into a few awkward problems. I have spent
> too much time trying to understand what the issue is and now I resort to
> your collective expertise hoping you could shed some light into the matter.
>
> To put is simply, when I run eev from the command line, I am unable to
> plot any wave forms that are inside any subfolder inside either WAV or WOR
> directories. I can access the S-files in the REA subdirectories with no
> problem. I have tried this for many of the test databases and the pattern
> continues to show. Strangely if I copy the waveform files directly to the
> WAV or WOR directory, I can use the plot command with no problem, and pick
> phases and do all the usual tasks. This is a problem as I have months of
> data to analyze, I can?t afford to copy all the files to the WAV or WOR
> directory and have the database in a mess!
>
> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> exactly the same.
>
> Could anyone please help me out? I would be very grateful.
>
> Much obliged for your care and attention,
>
>
> Best regards,
>
>
> Emanuel Antunes
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 3 Oct 2012 12:25:18 +0100
> From: Emanuel Antunes <[email protected]>
>
> Subject: Re: [seisan] Unable to access WAV subfolders...
> To: [email protected]
>
>
> Greetings again,
>
> I should also mention that before I reinstalled Linux I had Seisan 9.1
> working with no problems, and that's the thing that bothers me the most. I
> can't find the cause of the problem.
>
> To try to make it clearer, when I am in "eev" in the terminal (accessing a
> database that has the waveform files inside a subdirectory in either WAV or
> WOR), I use the "p" command for a certain event, seisan show's me all the
> available options and everything goes well until right after the "Low and
> high cut for filter, return for no filter" prompt. After this nothing is
> shown and it returns to the usual "eev" prompt of the events.
>
> Once again, thanks in advance for your help.
>
>
> Kind regards,
>
>
> Emanuel Antunes
>
> 2012/10/3 Emanuel Antunes <[email protected]>
>
> > Dear all,
> >
> >
> > I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
>
> > reinstalled SEISAN (the latest available version), ran through the usual
> > configuration, but I am running into a few awkward problems. I have spent
> > too much time trying to understand what the issue is and now I resort to
> > your collective expertise hoping you could shed some light into the
> matter.
> >
> > To put is simply, when I run eev from the command line, I am unable to
> > plot any wave forms that are inside any subfolder inside either WAV or
> WOR
> > directories. I can access the S-files in the REA subdirectories with no
> > problem. I have tried this for many of the test databases and the pattern
> > continues to show. Strangely if I copy the waveform files directly to the
> > WAV or WOR directory, I can use the plot command with no problem, and
> pick
> > phases and do all the usual tasks. This is a problem as I have months of
> > data to analyze, I can?t afford to copy all the files to the WAV or WOR
>
> > directory and have the database in a mess!
> > Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> > exactly the same.
> >
> > Could anyone please help me out? I would be very grateful.
> >
> > Much obliged for your care and attention,
> >
> >
> > Best regards,
> >
> >
> > Emanuel Antunes
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: text/html
> Size: 2418 bytes
> Desc: not available
> URL: <
> http://mailman.uib.no/private/seisan/attachments/20121003/82be3f76/attachment.txt
> >
>
> ------------------------------
>
> Message: 3
> Date: Wed, 3 Oct 2012 11:29:11 +0000
> From: Branden Christensen <[email protected]>
>
> Subject: Re: [seisan] Unable to access WAV subfolders...
> To: Emanuel Antunes <[email protected]>
> Cc: [email protected]
>
>
> Emanuel:
>
>
> Good day.
>
> I am not a Seisan expert but it would seem to me that when you moved
> your installation you failed to copy over your ../DAT/SEISAN.DEF file where
> your WAVEFORM_BASE's are defined.
>
>
> Kind Regards,
>
> *Branden C. Christensen*
> Director, OSOP
> *[email protected]*
> www.osop.com.pa
> Volcan, Panama
>
>
>
>
>
> On Wed, Oct 3, 2012 at 10:42 AM, Emanuel Antunes
> <[email protected]>wrote:
>
> > Dear all,
> >
> >
> > I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
>
> > reinstalled SEISAN (the latest available version), ran through the usual
> > configuration, but I am running into a few awkward problems. I have spent
> > too much time trying to understand what the issue is and now I resort to
> > your collective expertise hoping you could shed some light into the
> matter.
> >
> > To put is simply, when I run eev from the command line, I am unable to
> > plot any wave forms that are inside any subfolder inside either WAV or
> WOR
> > directories. I can access the S-files in the REA subdirectories with no
> > problem. I have tried this for many of the test databases and the pattern
> > continues to show. Strangely if I copy the waveform files directly to the
> > WAV or WOR directory, I can use the plot command with no problem, and
> pick
> > phases and do all the usual tasks. This is a problem as I have months of
> > data to analyze, I can?t afford to copy all the files to the WAV or WOR
>
> > directory and have the database in a mess!
> > Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> > exactly the same.
> >
> > Could anyone please help me out? I would be very grateful.
> >
> > Much obliged for your care and attention,
> >
> >
> > Best regards,
> >
> >
> > Emanuel Antunes
> > _______________________________________________
> > seisan mailing list
> > [email protected]
> > http://mailman.uib.no/listinfo/seisan
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: text/html
> Size: 3619 bytes
> Desc: not available
> URL: <
> http://mailman.uib.no/private/seisan/attachments/20121003/53471cb5/attachment.txt
> >
>
> ------------------------------
>
> Message: 4
> Date: Wed, 3 Oct 2012 12:49:20 +0100
> From: Emanuel Antunes <[email protected]>
>
> Subject: Re: [seisan] Unable to access WAV subfolders...
> To: Branden Christensen <[email protected]>
> Cc: [email protected]
>
>
> Branden,
>
> Thank you for your swift reply. Unfortunately that doesn't seem to be the
> issue, on my previous installation I hadn't altered the default SEISAN.DEF
> file and it was running well for the tasks I was performing (mainly phase
> picking and location of seismic events). Furthermore, the SEISAN.DEF has
> the correct WAVEFORM_BASE's defined for the test databases and still they
> don't work properly. I checked with a colleague who is also using SEISAN
> here at the lab and her SEISAN.DEF is just the same as mine and she has no
> trouble with SEISAN.
>
> This strange behavior only happened with my switch from Ubuntu from Debian.
> Also, Mac OS X (10.6) is showing the same strange symptoms.
>
> Thanks again for your suggestion.
>
> Best wishes,
>
> Emanuel A.
>
> 2012/10/3 Branden Christensen <[email protected]>
>
> > Emanuel:
> >
> >
> > Good day.
> >
> > I am not a Seisan expert but it would seem to me that when you moved
> > your installation you failed to copy over your ../DAT/SEISAN.DEF file
> where
> > your WAVEFORM_BASE's are defined.
> >
> >
> > Kind Regards,
> >
> > *Branden C. Christensen*
> > Director, OSOP
> > *[email protected]*
> > www.osop.com.pa
> > Volcan, Panama
> >
> >
> >
> >
> >
> > On Wed, Oct 3, 2012 at 10:42 AM, Emanuel Antunes <
> > [email protected]> wrote:
> >
> >> Dear all,
> >>
> >>
> >> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
>
> >> reinstalled SEISAN (the latest available version), ran through the usual
> >> configuration, but I am running into a few awkward problems. I have
> spent
> >> too much time trying to understand what the issue is and now I resort to
> >> your collective expertise hoping you could shed some light into the
> matter.
> >>
> >> To put is simply, when I run eev from the command line, I am unable to
> >> plot any wave forms that are inside any subfolder inside either WAV or
> WOR
> >> directories. I can access the S-files in the REA subdirectories with no
> >> problem. I have tried this for many of the test databases and the
> pattern
> >> continues to show. Strangely if I copy the waveform files directly to
> the
> >> WAV or WOR directory, I can use the plot command with no problem, and
> pick
> >> phases and do all the usual tasks. This is a problem as I have months of
> >> data to analyze, I can?t afford to copy all the files to the WAV or WOR
>
> >> directory and have the database in a mess!
> >> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> >> exactly the same.
> >>
> >> Could anyone please help me out? I would be very grateful.
> >>
> >> Much obliged for your care and attention,
> >>
> >>
> >> Best regards,
> >>
> >>
> >> Emanuel Antunes
> >> _______________________________________________
> >> seisan mailing list
> >> [email protected]
> >> http://mailman.uib.no/listinfo/seisan
> >>
> >
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: text/html
> Size: 4734 bytes
> Desc: not available
> URL: <
> http://mailman.uib.no/private/seisan/attachments/20121003/3d1a6134/attachment.txt
> >
>
> ------------------------------
>
> Message: 5
> Date: Wed, 3 Oct 2012 12:39:22 +0000
> From: Branden Christensen <[email protected]>
>
> Subject: Re: [seisan] Unable to access WAV subfolders...
> To: Emanuel Antunes <[email protected]>
> Cc: [email protected]
>
>
> Emanuel:
>
>
> Let's confirm if things compiled correctly. I typically do so by running
> the following test:
>
> eev 199606 TEST
>
> The output should be:
>
> 1996  6 Reading events from base TEST_  2
>
> **** WARN: specified file does not exist          ****
>           /home/brando/seismo/REA/REA.LOG
> ****                                              ****
>   No data base log file, now make it
>   Data base log file updated with a new data base
> #    1  3 Jun 1996 19:55 35  D  47.760 153.227  0.0  N 1.1 5.6WHRV  12  ?
>
> Hit p and let us know if a plot is returned.
>
>
> B
>
> *Branden C. Christensen*
> Director, OSOP
> *[email protected]*
> www.osop.com.pa
> Volcan, Panama
>
>
>
>
>
>
> On Wed, Oct 3, 2012 at 11:25 AM, Emanuel Antunes
> <[email protected]>wrote:
>
> > Greetings again,
> >
> > I should also mention that before I reinstalled Linux I had Seisan 9.1
> > working with no problems, and that's the thing that bothers me the most.
> I
> > can't find the cause of the problem.
> >
> > To try to make it clearer, when I am in "eev" in the terminal (accessing
> a
> > database that has the waveform files inside a subdirectory in either WAV
> or
> > WOR), I use the "p" command for a certain event, seisan show's me all the
> > available options and everything goes well until right after the "Low and
> > high cut for filter, return for no filter" prompt. After this nothing is
> > shown and it returns to the usual "eev" prompt of the events.
> >
> > Once again, thanks in advance for your help.
> >
> >
> > Kind regards,
> >
> >
> > Emanuel Antunes
> >
> >
> > 2012/10/3 Emanuel Antunes <[email protected]>
> >
> >> Dear all,
> >>
> >>
> >> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
>
> >> reinstalled SEISAN (the latest available version), ran through the usual
> >> configuration, but I am running into a few awkward problems. I have
> spent
> >> too much time trying to understand what the issue is and now I resort to
> >> your collective expertise hoping you could shed some light into the
> matter.
> >>
> >> To put is simply, when I run eev from the command line, I am unable to
> >> plot any wave forms that are inside any subfolder inside either WAV or
> WOR
> >> directories. I can access the S-files in the REA subdirectories with no
> >> problem. I have tried this for many of the test databases and the
> pattern
> >> continues to show. Strangely if I copy the waveform files directly to
> the
> >> WAV or WOR directory, I can use the plot command with no problem, and
> pick
> >> phases and do all the usual tasks. This is a problem as I have months of
> >> data to analyze, I can?t afford to copy all the files to the WAV or WOR
>
> >> directory and have the database in a mess!
> >> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> >> exactly the same.
> >>
> >> Could anyone please help me out? I would be very grateful.
> >>
> >> Much obliged for your care and attention,
> >>
> >>
> >> Best regards,
> >>
> >>
> >> Emanuel Antunes
> >
> >
> >
> > _______________________________________________
> > seisan mailing list
> > [email protected]
> > http://mailman.uib.no/listinfo/seisan
> >
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: text/html
> Size: 5283 bytes
> Desc: not available
> URL: <
> http://mailman.uib.no/private/seisan/attachments/20121003/75723a16/attachment.txt
> >
>
> ----------------------------------------------------------------------
> Send seisan mailing list submissions to
>     [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
>     http://mailman.uib.no/listinfo/seisan
> or, via email, send a message with subject or body 'help' to
>     [email protected]
>
> You can reach the person managing the list at
>     [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of seisan digest..."
>
>
>
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
>
>
> End of seisan Digest, Vol 56, Issue 1
> *************************************
>
>
>
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
>
>
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to