The problem is that you shouldn't set the irq and iobase.
You need to set the base address to nothing (leave it blank) and set the
irq to "autoirq".
Try this. That is how mine is set and it works.
Bartjan Wattel wrote:
>
> Hi,
>
> I am trying to setup STN on a P90/16Mb with a 3Com 3c509b card and ISDN
> external TA, but I can't get the NIC to be recognized. I've tried
> everything in the Linux HOWTO: Ethernet, but it does not help. I did set
> the correct IO address and IRQ, tested the card with Win9x. The card is not
> in PnP mode.
>
> Any clues on this one ?
>
> Thanks for your time,
> --
> Bartjan Wattel.
>
> /=-=-=-=-Click Here & Support Our Sponsor-=-=-=-=-=-=-=-=-=\
> FREE DEBT REDUCTION HELP? Did you know you can get COMPLETELY
> FREE HELP lowering your interest charges and debt payments?
> Click now for more information about this FREE, LIMITED TIME OFFER.
> http://click.topica.com/aaaa5Dbz8Rp2bAizYGc/edebtconsolidation
> \=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=/
>
> --
> Visit http://www.ShareTheNet.com for info about ShareTheNet
> Visit http://www.topica.com/lists/sharethenet for info about this list
>
> ___________________________________________________________
> T O P I C A http://www.topica.com/t/17
> Newsletters, Tips and Discussions on Your Favorite Topics
--- Sponsor's Message --------------------------------------
Who Are the Dot-Com Dogs?
Find out who's getting funding and who's getting laid off!
http://click.topica.com/aaaa4ubz8Rp2bAfyICc/winnerslosers
------------------------------------------------------------
--
Visit http://www.ShareTheNet.com for info about ShareTheNet
Visit http://www.topica.com/lists/sharethenet for info about this list
___________________________________________________________
T O P I C A http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics
