I started using Toms window screen" method when he first posted it
and have never looked back ;it's a brilliantly simple tip" and can be
used for almost all Shimming requirements.
Thanks Tom
Jeremy
TOM FLANAGAN wrote:
I've done it by shimming the tip with fiberglass
window screen. Wrap the screen (dry) around the tip
until you get a firm fit. Start the ferrule onto the
tip.
Put on your rubber gloves. Epoxy the tip, wrap the
screen onto the tip (leave a little bit of screen
hanging over the bottom edge of the tip). Add epoxy to
the screen. Put some epoxy in the hosel and "screw"
the tip into the hosel. The little bit of screen in
the bottom will help keep the screen from riding up
the shaft. If any screen does ride up, trim it with a
razor blade. It works for me.
TFlan
--- Ed Boggess <[EMAIL PROTECTED]> wrote:
What is the best cost effective way to convert a
taper tip iron shaft to a
parallel iron head?
**
------------------------------
Be a better friend, newshound, and know-it-all
with Yahoo! Mobile. Try it
now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ>
