Robert. Have you ever played around with the Equaliser from the PCS? Great tool for everyone to be on the same page. André. ----- Original Message ----- From: Robert Devino To: ShopTalk@mail.msen.com Sent: Wednesday, December 10, 2008 3:15 PM Subject: Re: ShopTalk: 7-iron at 353 cpm - how?
Hi Harry Why not a 5" inch clamp. The BTR shaft is designed by the same guy that designed the rifle shafts. It is basically his next generation of rifle shaft but improved in the fact that with the new machinery he has now he doesn't need to reinforce the tip, so the BTR doesn't swing weight quite as heavy as a rifle shaft would. All shafts that Kim Braly designs are designed to be frequencied with a 2.5" clamp not a 5" clamp. I do use a 5" clamp on other manufacturers shafts. If you do any work with a Rifle , KB Steel , or a BTR and you don't use a 2.5" clamp you will not get a shaft to play the way Kim designed them too. If your using a 5" clamp to build rifles or KB steels to a rifle chart then your actually building about 20 - 25 cycles to soft. example if you build a rifle shaft to a 6.0 with a 5" clamp your really building something more in the range of a 4.0 . Sincerely, Robert Devino 14252 Delano St. Van Nuys, Ca. 91401 (818) 770-0475 ------------------------------------------------------------------------------
