Yes the color was a very light gold, it looked clear except for those black thing that had come of the electrodes, I did switch the current about every 10 minutes since I was having to do it manually. WHen I stopped the process before at 4.5 ma it solution was totally clear and there was not much treeing of the electorodes. WHen it gets to around the 5.5 or 6 ma level that is when I notice some coloration in the water. I started giving it to my father for infection in his toe. I could not give him much as it would led to diarrhea. Then I make a batch and stopped it at 2.0 ma. He took this for several days and the diarrhea stopped. He does not have diarrhea now but yesterday I gave him his first doses of the 7.0ma solution, Gave him 2 ox. 3 times yesterday. He usually takes a little insulin at night, he checked his blood sugar last night and it was not high enough for him to take any insulin, He urinated more last night than he ever remembered urinating. On occasions he takes Lassix for his edema in his legs from Heart problems. He urinated much more than when he even takes lassix. He does not take but 20 mg. of lassix though when he takes it and usually only has to take it about 1 or 2 nights a month. The infection on his toe has gone into osteomalitis and that was the reason for giving that dosage of silver. I am very curious though, I have never seen anyone post anything about the increase in urine output from taking CS. Have you ever heard of this? Thanks John jfost...@cableone.net ----- Original Message ----- From: Ivan Anderson <i...@win.co.nz> To: <silver-list@eskimo.com> Sent: Saturday, June 26, 1999 6:31 AM Subject: Re: CS>questions
> Hi John. > > If I remember correctly the post you refer to noted no size difference > with generating current up to 12mA. Points to note though, are that > the water was under constant stirring, the voltage was switched every > 10 seconds, and the voltage was kept constant at 30V +/- 1V. What was > not mentioned was, electrode geometry, wetted depth, and distance > apart. > Each setup has its own optimum settings, which is always a compromise > between speed of generation and running a clean controlled reaction. > Agitation is of great benefit, spreading the silver ions throughout > the solution and eliminating the high concentration between the > electrodes. > In my small generators, the current is limited to 0.75mA. In my > 25litre systems, current is limited to 8mA and the colour is a very > pale yellow, but I have run at 16mA with no problems, the colour being > slightly deeper. I filter the 25 litres at 0.2microns (um) under inert > gas pressure and have no loss of colour or concentration. > The trouble with generators that are not current limited is that you > cannot go past a point without experiencing what you talked about. > Constant or frequent stirring will raise that point somewhat. > BTW what colour did you end up with? > If the colour is a clear yellow or lighter, filter and use. > > Regards - Ivan > > ----- Original Message ----- > From: jfoster <jfost...@cableone.net> > > > I have been running some batches of colloidal silver. I first stop > the > > process at 4.5 ma but never got any color from it until it had sat > for about > > 2 weeks and then it started to turn a goldish tint. I decided to let > the > > voltage run up a bit since the post I saw showed no significance in > particle > > size up to 12 ma. I ran a batch to about 7 ma and there was a good > bit of > > the black stuff floating around in the water. I could really see the > > electrodes bubbling and giving off the stream of whatever. I guess > you can > > just strain this through a coffee filter and then use, right? > > Thanks John jfost...@cableone.net > > > > > > > > > > -- > > The silver-list is a moderated forum for discussion of colloidal > silver. > > > > To join or quit silver-list or silver-digest send an e-mail message > to: > > silver-list-requ...@eskimo.com -or- > silver-digest-requ...@eskimo.com > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > To post, address your message to: silver-list@eskimo.com > > > > List maintainer: Mike Devour <mdev...@id.net> > > > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: silver-list@eskimo.com > > List maintainer: Mike Devour <mdev...@id.net> > > -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com List maintainer: Mike Devour <mdev...@id.net>
