Keith,
You are at a perfect place with 1.4 ma.
Your CS will be of high quality which you will spoil by raising the
current.
Yes, it takes a long time. That's what it takes with LVDC systems.
There are other methods such as HVDC involving thousands of volts.
They are not simple, and can be dangerous.
You are using the easiest method devised.
Chuck
I try to see good in everything--it makes me horrible to live with
On 7/21/2007 1:46:17 PM, Keithmj ([email protected]) wrote:
> Hi All..Still playing around. I was wondering what the proper milliamps
> would be to make the Colloidal Silver. I am using the 30vdc power supply
> with a current limiting diode and my milliamps are at 1.4 mA and have been
> brewing a 32ounce batch and after about 15 hours it is only up to 7PPM so
> I bypassed the current limiting diode and put in a 33kohm resistor and it
> took it up to 2.4 milliamps. I can get current limiting diodes but was
> wondering what would be the best setting? If I don't use any thing to limit
> the milliamps the power supply will put out 16 milliamps which I think is to
> high to use..Any ideas on this..Thanks..Keithmj
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Address Off-Topic messages to: [email protected]
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <[email protected]>
