Sol:

I read the link on Vision Ware.  I'm going to write Corning and get more
info.  Who wrote the info about Corning at Mothering - there is no
reference?  I'm beginning to wonder if there is any safe cooking pots or
cooking ware?  Seems there are drawbacks to most.  Whitaker and Mercola are
pushing their brands, too, as safe, but I'll wait for more objective third
party tests.
I gave up my glass top stove about ten years ago and went to natural gas
when they finally piped natural gas into the "outback" country where I live.
i know from studying ceramics and pottery years ago that there is lead in
certain ceramic glazes - so I avoid most ceramic plates and bowels. I don't
use plastic to store anything - only glass.   I have a set of German dishes
- I'll send you the name later - that I feel are safe, but can't prove.  It
gets more complicated as we go along here.

John

On Fri, Jan 8, 2010 at 8:50 PM, sol <sol...@sweetwaterhsa.com> wrote:

>
> I've been trying to find info on vision ware re my memory of it being a
> problem, and didn't find anything about lead, but did find this:
>
>> While anodized aluminum pots are not reactive, manufacturing them is toxic
>> to the environment, so I can't endorse them. In the anodizing process, the
>> etch reacts with aluminum and the resulting highly caustic outgas is vented
>> into the atmosphere. Neither do I recommend CorningWare or VisionWare
>> because these products contain synthetic polymers.
>>
> the quote is from
> http://www.mothering.com/discussions/showthread.php?t=32482 it gives no
> references nor test results.
> I had no idea that anodizing aluminum was a toxic process when I purchased
> mine a few years ago, and I have  not researched the issue.
> sol
>
>
>
> --
> The Silver List is a moderated forum for discussing Colloidal Silver.
>
> Instructions for unsubscribing are posted at: http://silverlist.org
>
> To post, address your message to: silver-list@eskimo.com
>
> Address Off-Topic messages to: silver-off-topic-l...@eskimo.com
>
> The Silver List and Off Topic List archives are currently down...
>
> List maintainer: Mike Devour <mdev...@eskimo.com>
>
>