Buy a new vessel to brew in. That makes a HUGE difference and bending the wires could totally be the reason for what happened.
Jaxi 2012/2/25 André Juthe <andre.ju...@gmail.com> > Thanks Asif for your response. > > My distilled water was as good it can be since I bought it from > drugstore and I hade cleaned the vessel before use. However, I had to > bent the wires since the vessel was to shallow and they were more > than 1,5 inch apart at the end Perhaps that could be an explanation? > > > > /Andre > > 2012/2/25 Asif Nathekar <asifnathe...@hotmail.com>: > > Hi Andre, > > > > Here are some points : > > > > 1 ) Your brewing vessel should be very clean, and your silver should > also be > > very clean, meaning no oils from fingers e.t.c. > > > > 2) Use a very very good distilled water, preferably double distilled, I > > distill my own and single distill never ever works well. I have had this > > advice from others too. > > > > 3) Use a good meter to check the quality of your water and also the end > > result. the water distilled water shouldn't have a reading of more than > 1 us > > or ppm. > > > > 4 ) Always clean the electrodes between brews. > > > > 5 ) If all that fails, call someone at Silvergen, Trem has earned a good > > reputation for a reason!.. > > > > Give that a go and let us know. > > > > Good luck!. > > > > Peace to all, > > > > Asif. > > > > -------------------------------------------------- > > From: "André Juthe" <andre.ju...@gmail.com> > > Sent: Saturday, February 25, 2012 12:54 PM > > > > To: <silver-list@eskimo.com> > > Subject: Re: CS>Interview on One Radio Network > > > >> Hi dear friends of CS, > >> > >> I have just tried my SG6 from www.silvergen.com. I chose that one > >> although it was expensive after reading a lot of about different > >> generators and it always got positive reviews and positive comments. > >> However, my first try was a bit disappointing. It took very long time > >> do to it, and it it swims around silverflakes on the surface and > >> bigger flakes lies at the bottom and I will have to filter it before > >> use. Since I have never done this before I do not really know what to > >> expect. Is this the way it should be? > >> > >> Kind regards > >> > >> André > >> > >> > >> -- > >> The Silver List is a moderated forum for discussing Colloidal Silver. > >> Rules and Instructions: http://www.silverlist.org > >> > >> Unsubscribe: > >> <mailto:silver-list-requ...@eskimo.com?subject=subscribe> > >> > >> Archives: > >> http://www.mail-archive.com/silver-list@eskimo.com/maillist.html > >> > >> Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com> > >> List Owner: Mike Devour <mailto:mdev...@eskimo.com> > >> > >> > >> > > > >
