Ok, thanks for all the comments. I have two other questions: (1) What is the simplest and cheapest way to distill water ) (buying from a drugstore will be expensive in the long run)
(2) What is the best way to clean the silver wires between the brews ? Should any substance be used? /André 2012/2/25 jaxi <jaxi.sch...@gmail.com>: > Buy a new vessel to brew in. That makes a HUGE difference and bending the > wires could totally be the reason for what happened. > > Jaxi > > > 2012/2/25 André Juthe <andre.ju...@gmail.com> >> >> Thanks Asif for your response. >> >> My distilled water was as good it can be since I bought it from >> drugstore and I hade cleaned the vessel before use. However, I had to >> bent the wires since the vessel was to shallow and they were more >> than 1,5 inch apart at the end Perhaps that could be an explanation? >> >> >> >> /Andre >> >> 2012/2/25 Asif Nathekar <asifnathe...@hotmail.com>: >> > Hi Andre, >> > >> > Here are some points : >> > >> > 1 ) Your brewing vessel should be very clean, and your silver should >> > also be >> > very clean, meaning no oils from fingers e.t.c. >> > >> > 2) Use a very very good distilled water, preferably double distilled, I >> > distill my own and single distill never ever works well. I have had this >> > advice from others too. >> > >> > 3) Use a good meter to check the quality of your water and also the end >> > result. the water distilled water shouldn't have a reading of more than >> > 1 us >> > or ppm. >> > >> > 4 ) Always clean the electrodes between brews. >> > >> > 5 ) If all that fails, call someone at Silvergen, Trem has earned a good >> > reputation for a reason!.. >> > >> > Give that a go and let us know. >> > >> > Good luck!. >> > >> > Peace to all, >> > >> > Asif. >> > >> > -------------------------------------------------- >> > From: "André Juthe" <andre.ju...@gmail.com> >> > Sent: Saturday, February 25, 2012 12:54 PM >> > >> > To: <silver-list@eskimo.com> >> > Subject: Re: CS>Interview on One Radio Network >> > >> >> Hi dear friends of CS, >> >> >> >> I have just tried my SG6 from www.silvergen.com. I chose that one >> >> although it was expensive after reading a lot of about different >> >> generators and it always got positive reviews and positive comments. >> >> However, my first try was a bit disappointing. It took very long time >> >> do to it, and it it swims around silverflakes on the surface and >> >> bigger flakes lies at the bottom and I will have to filter it before >> >> use. Since I have never done this before I do not really know what to >> >> expect. Is this the way it should be? >> >> >> >> Kind regards >> >> >> >> André >> >> >> >> >> >> -- >> >> The Silver List is a moderated forum for discussing Colloidal Silver. >> >> Rules and Instructions: http://www.silverlist.org >> >> >> >> Unsubscribe: >> >> <mailto:silver-list-requ...@eskimo.com?subject=subscribe> >> >> >> >> Archives: >> >> http://www.mail-archive.com/silver-list@eskimo.com/maillist.html >> >> >> >> Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com> >> >> List Owner: Mike Devour <mailto:mdev...@eskimo.com> >> >> >> >> >> >> >> > >> >