Hi Donna,

There is no need to boil the water. Only very few die hards do it.

If you will go to #14 wires and stirring there is no need to clean the
electrodes. since you are using 27 volts it would be very benificial to
get a digital multi-meter and put it on one lead to the cell and set it
to read current in milliampers.

With a constant voltage system that you have the inital current shuld be
around .2 to .5 ma if the DW is any good. the current at shut-off should
be about 3 to 3.ma.

Many do not use a meter but the learning curve can be rather long.

"Ole Bob"




--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>