Marlene,
If  you have MS, I hope you are using enough CS.  I also have (almost had)
MS.  I drink 16 oz CS everyday.  I drink  it a little all day long. I have
recently started mixing  6 drops 3% H2o2 with the CS, and wait about 15 min
before I begin to drink it.  It seems to get to the cause of the MS
(mycoplasyma) quicker.  It may take awhile, but it definatley is worth
it!!!!!
----- Original Message -----
From: "Marlene Hanson" <[email protected]>
To: <[email protected]>
Sent: Friday, April 26, 2002 2:14 PM
Subject: Re: CS>colloidal copper


Hi Carl, I would be cautious in using copper.  Very little can disrupt the
balance for me.  I have tried copper braclets which increased spasticity I
have MS.  I have tried copper powder and it gave headaches.  Copper is
necessary but in very small amounts.  the powder was too much at 1/16 th
inch on the tip of a knife. I am not a fear filled person but thought I
would let you know my experience. Please Be Careful Marlene


>From: "Carl George" <[email protected]>
>Reply-To: [email protected]
>To: <[email protected]>
>Subject: CS>colloidal copper
>Date: Fri, 26 Apr 2002 11:07:54 -0500
>
>Hi, List
>
>Another question about Colloidal Copper. Yesterday, I tried to make my firs
>batch, using the same equipment that I use to make CS ( one gallon crock
>pot that keeps the temperature about 140 degrees; AC-DC converter which
>delivers 24 volts, 525 mA). Of course, I used copper wire and copper
>bracelets (to increase the surface area of copper) in the distilled water
>(0.2 on the Hanna meter).
>
>Now, when I use this apparatus to make CS, I can make a gallon of CS in
>about 3-4 hours, which agglomerates to about 10-15 ppm. I assumed that the
>CC would be similar.
>
>But it wasn’t. I "cooked" the CC (colloidal copper) for 24 hours, after
>which it tested out at 3.6 ppm. And while it was not a dark black, it was
>not perfectly clear. The CS I have made is perfectly clear. This CC was
>not. It was darker. No taste to it. But it was darker than the CS.
>
>Of course, my question is: Is this normal ? To take 24 hours to make 3.4
>ppm? To have a dark opaqueness to it?
>
>If not, any ideas as to what I am doing wrong? All suggestions would be
>appreciated. Again, thanking all responses in advance.
>
>While I am on the net, I think someone had a question as to what colloidal
>copper was used for. Well, I haven’t used it yet, but in my readings it is
>used to clean the arteries and veins (good for arthritis, rheumatism, and
>vericose veins). That is why I am trying it. It is also said to be good for
>collagen production, protein metabolism, and as a brain/synapse stimulator.
>I got this information searching Google for colloidal copper.
>
>Carl George
>
>




_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to:
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>